How to make a threshold at the front door in an apartment on your own

The process of installing doors is significant, and finishing the threshold and correct installation are also important. Not everyone understands how important the threshold is in the interior. However, the functionality and benefits are clear.

Various door threshold options

These are just some of the benefits that the completed finishing of the threshold of an entrance door, interior door or door to another room provides.

Work phases

A cement screed on a prepared concrete foundation forms a threshold in the bathroom. How to do this will be described below.

• Wooden pages are designed in such a way that the cement mortar does not expand and does not form the shape of the future threshold. The slabs should be wrapped in foil so that the ties do not stick.
• The syringe is poured into the mold and the top is aligned with the rule.
• The threshold level is adjustable in the bathroom.
• The layer must be completely dry, this may take several days. At this time, the cement screed should be regularly moistened with water. This is necessary to prevent cracks in the screed.
• When the concrete is completely dry, the plates are removed. The pores must then be cleaned out so that the surface is as plain as possible.
• Now we need to coat the threshold on all coated surfaces.

Work on the threshold has been completed.

Then finish the threshold in the bathroom with ceramic granite. Also read: “How to get to the threshold at the front door and what material.”

This is done as follows:

• The adhesive is applied to the tiles using a spatula. The glue is applied to the surface and pressed for a few seconds.
• Using special plastic crosses, the seams between the plates are leveled. Use a level to smooth the surface.
• After laying the seams, they are washed with a special composition of the same tone as the tiles. To do this, use a rubber spatula and remove excess mixture with a foam sponge.

The resulting bathroom floor tiles must be tested for durability, this is done with a simple touch - the sound must be the same everywhere. If you can't avoid voids, the tiles will quickly tear apart in these areas.

Ilya Kotkin

Do you need a threshold in the bathroom? Actually, we need a but! when we had problems with ventilation, we were advised to either remove the threshold or not close the door to the bathroom. Probably the best option is when the door has special “through holes in the lower half of the door...

If suddenly a pipe bursts in the bathroom, then without a threshold, water will immediately flow into the apartment. Therefore, it is better that there is. We have never installed thresholds in apartments, what nonsense to talk about noise insulation with three children. Learn to better enjoy children's squeals.

I know nerves and all that, so I say learn it. You need to learn patience. It’s about...

Zinaida Shmakova

Sharp threshold in the bathroom due to the tiles on the floor, the door is butt.

What can be done? It would be better to cut the tiles by 5 cm and lay a semicircular threshold (if I presented the problem correctly), “round it off” with a grinder if that doesn’t work, as john222 said, or cut the door leaf and install a threshold.

In bathrooms, it is necessary to leave a small gap under the door; to ensure air flow, exhaust ventilation without influx is ineffective), thresholds for joining different types, https://www.vikont-spb.ru/catalogue

Sergey Dubasov

Which door to install in a bathroom is veneered? Which one do you have? Any door can be used, but preferably without a threshold (so that there is a gap of 1.5 cm between the floor and the door) and the bathroom needs to be ventilated. Where do you get moisture in the bathroom?

the bathroom must have supply and exhaust ventilation, and the veneer can be protected with wax polish for 5-7 years. We have solid wood. Even the cheapest door will do. Hollow MDF film. By the way, such doors react even better to changes in temperature and humidity. But the array (solid veneer) will change sizes.

Vyacheslav Kulikov

At the dacha we found a door bought a long time ago, the door of which does not reach the frame to the frame) What is there 10 cm for? Because this is not an entrance door, but for a room or for a bath, nowadays they don’t make thresholds in apartments so that a cat can get through. Ventilation is probably a door for there should be a gap for ventilation at the bottom.

But 10cm is a lot. in the toilet the door should have a gap, but it doesn’t reach downstairs, most likely for the threshold. or a door without a frame at all

Sergey Kiryanov

I want to install doors with a threshold in the bathroom, but I don’t know what to do first, screed the floor or install the doors? Fill the floor! Is it worth flooding the bathroom floor?

Is he crooked? First, of course, it starts with the floor. Well, I would advise making the doors without a threshold. I installed a board in the opening so that the solution would not spread into the corridor. Then the door and then the floor tiles.

Polina Kozina

It seems to me that the layout of the apartment is not entirely successful. Well, yes, the layout is unsuccessful, a lot of partitions, a narrow tunnel instead of a corridor and there is zero sense.

They wrote to you correctly. Separate part of the corridor as a hallway, separate the bedroom from part of the room, and leave the rest as a single living room with kitchen.

Tips for choosing

When deciding on the design of the threshold, be sure to take into account the size and material from which the frame and the passage door are made. The threshold will fully perform its functions when the following indicators are taken into account during its design:

If you just need to delimit the space between rooms, it is enough to purchase wooden or plastic options.

In any case, when choosing a product, the design of the door and threshold should not differ. As a set, they should be a complete tandem. Thresholds are an integral part of buildings, providing the premises with safety, noise and heat insulation.

Manufacturers offer a wide selection of similar products for every taste and color. The cost of products also ranges from the cheapest to the most expensive items. The most popular thresholds are wooden models, as they are affordable for most buyers. Concrete steps are more expensive. To install this structure, you can invite a specialist, or you can perform this procedure yourself.

When installing a metal threshold, it is important to select the appropriate fittings and fastenings that will securely hold this item in place and will not deform over time.

To learn how to make a threshold for the front door, see the following video.

Source

Design features of latches

Door latches, which you can install yourself, are a kind of locking device, the operating principle of which is similar to the operation of built-in door locks.

The main difference between a latch and a full-fledged lock is that in the first case, a special key is not required to open the door. To do this, just turn the handle of the locking mechanism. This solution is ideal for interior door designs. Such latches are installed on entrance doors as an additional locking device and to increase security.

By design, the following types of products are distinguished:

• Latches;
• Deadbolts;
• Butterfly valves.

According to the method of mounting the latches, there are:

• Invoices;
• Mortise.

The most popular among consumers are rotary latch models that cut directly into the door leaf. They are equipped with an automatic shutter mechanism and have a more attractive appearance. Installation of such devices can be performed on doors made of any material.

There are other options for latches, for example, rotary latching handles, which allow you to close interior doors and securely fix them.

Concrete construction technology

Before pouring the entrance door threshold using cement mortar, prepare the following materials and tools:

• putty knife,
• construction plumb,
• hammer drill,
• primer paint,
• formwork,
• knitting needle
• components for concrete mix,
• paving slabs.

To ensure strong adhesion of concrete to the floor screed, the surface is treated with a primer. For a small step, wooden formwork is made in accordance with its dimensions.

Installation process

In cases where unevenness is visible on your work surface, or it is located at a low level, you need to perform a screed. A special wooden formwork must first be organized, which can prevent the solution from leaking beyond the expected threshold.

In order to prevent the building substance from sticking to the wooden formwork, it can be covered with cellophane or plastic film. Only after this the prepared space can be filled with mortar. Based on the sides you have built, the mixture needs to be thoroughly leveled. In order to determine the evenness and horizontality of the surface being created, use a building level.

Complete hardening of the screed will occur a few days after completion of the work. During this time, the screed must be moistened with running water. This will eliminate the possibility of cracks forming. After the substance has completely set, you need to remove the formwork. Now the lining of the threshold with porcelain stoneware begins, but before that the resulting surface must be covered with a primer composition.

Threshold installation

The back side of the tile must be coated with an adhesive before laying. For this tutorial you will need a notched trowel. This technique will allow you to evenly distribute the solution over the tiles, thereby saving some adhesive. Now the porcelain stoneware is applied to the cement base and pressed for a few seconds. Porcelain stoneware tiles are leveled using the same building level. After laying and tiling, grouting of the joints must be carried out. In this case, a special composition must be used. It is applied to the joints of the tiles using a rubber spatula so as not to damage the front side of the porcelain stoneware. When the substance dries, its remains are removed from the tile with a simple sponge.

Wait until the solution is completely dry, and then check the quality of your work. All you have to do to do this is knock on the tile. If there is no sound indicating the presence of voids, you don’t have to worry at all - all your work has been done properly. And this, in turn, means that the threshold you create will last a long, long time.

Choosing interior thresholds

• After you have laid the flooring in adjacent rooms and installed an interior door, you need to measure the width and length of the gap that has formed between the joints, for example, of laminate and linoleum. The stores have a huge selection of thresholds in width and length, so be sure to measure.
• It often happens that the floor levels in adjacent rooms are different and in this case ordinary thresholds will not suit us. It is necessary to purchase multi-level thresholds. I’ll tell you in more detail how to choose them below.
• Thresholds are mostly made of aluminum. The colors and shapes are varied. There are also more durable metal ones, which are made from brass and stainless steel.
• Thresholds made from wood are, of course, very beautiful, but they will be expensive. They also require more complex care. They are generally not popular because they are not durable at all.

Please note: How to install platbands on interior doors

In order to make a horizontal connection between two different floor coverings, a cork expansion joint is usually used. This plank is an indispensable part, especially in those rooms where sudden temperature changes occur, as well as in those where there is a high level of humidity. It can expand and contract almost twice, which will absorb any thermal expansion.

Execution materials

When choosing raw materials, it is necessary to take into account the conditions in which the door threshold will be used.

The tasks that will be assigned to this element of the front door are also taken into account. There are enough materials for execution, but each of them will behave differently in the same circumstances

Metal

Perhaps this is the most reliable and durable material. Conventional steel is used extremely rarely and, as a rule, for industrial facilities. In residential premises, various alloys are mostly used. This is brass or stainless steel. But aluminum is very popular. It is easy to care for and very resistant to abrasion. The only downside is its slippery surface. Therefore, it is decorated with corrugated elements. They can be made of rubber, wood or plastic.

Advantages of metal thresholds:

• Used for any premises with high traffic;
• Not afraid of high humidity;
• Simple in design;
• Preservation of all characteristics with a sufficiently long service life;
• Finished products have a large selection of sizes;
• Easy to install;
• Not afraid of corrosion and mechanical stress;
• Low cost.

For interior passages, low thresholds are made (up to 2 cm). Some of them can even be installed with tile adhesive. A balcony or front door requires taller structures that are fixed with self-tapping screws. This is not difficult and anyone can do this work on their own.

Tree

Wooden thresholds are very popular in residential areas. For the front door, only hard wood should be used. You don’t even have to buy the planks, but make them yourself from oak or aspen. But store-bought products are not expensive and have a very wide range, differing in color and texture.

Advantages of wooden thresholds:

1. Environmental friendliness;
2. High insulation characteristics;
3. Easy to install;
4. Compatibility with laminate and linoleum;
5. Sufficient strength;
6. Low price.

But the material is sensitive to high humidity and is not recommended for installation outdoors or for bathrooms. True, if it is pre-treated with protective compounds and painted, then it copes with all tasks no worse than others.

But the wooden threshold has proven itself best in interior transitions. There is no need for serious processing and you can only use clear varnish. It will best highlight the beautiful texture of wood and the element will act as a good decor.

Concrete

One of the most durable options, but also the most expensive. As a rule, they are installed at entrance or balcony passages. Optimal for the private sector, where you can often see a tile threshold. A concrete base is poured at the front door and then lined with decorative material.

Features of concrete structure:

• Suitable for high traffic openings;
• Great durability (up to 50 years);
• Excellent waterproofing properties.

Concrete thresholds for the front door are extremely rarely left without decoration. They are usually covered with ceramic tiles. You can find laminate and wood finishes. But a simply painted concrete surface looks decent.

Most often, the threshold is made before the doors are installed. And for its production, a plasticizer must be added to the cement-sand mixture. This reduces the formation of cracks on the surface and extends service life.

But if chips do occur, then in most cases their covering will be only temporary. A serious crack indicates a violation of manufacturing technology and a complete rework of the threshold will be required.

Concrete is rarely used in interior passages. It can be seen, perhaps, only in the bathroom. In other premises it is not only unprofitable, but also of little aesthetic value. Under some circumstances, the threshold is made of brick. This can be seen especially often if it is multi-level, in the form of a staircase.

You can recall some examples of making plastic thresholds. But this material is fragile and is afraid of sunlight. You can find it when it comes complete with a metal-plastic door.

Installation procedure

If a new door threshold is installed to replace a worn one, then the defective element of the opening is dismantled; the work area must be thoroughly cleaned.

The interval between the frame posts is measured and the specifics of attaching the threshold to it are determined. For example, for wood you will have to take into account adjustments for the arrangement of the tongue-and-groove connection. Based on the measurement, the length of the workpiece is calculated.

Control of horizontal base. The threshold should lie strictly parallel to the top of the door block. Otherwise, problems will arise when opening/closing the door. Leveling the surface is easy to do by arranging a screed. Wedges will also help to raise the edge of the threshold if it is wooden. Regardless of the technique, it should eventually take a horizontal position.

Marking the opening. The recommendation on how to make an entrance door threshold in an apartment is clear - fix it on the concrete floor using anchor bolts or self-tapping screws with dowels. In a private house made of wood, fastening can also be done with nails. The optimal distance between hardware is 100 mm.

Installation of the threshold, alignment of its position relative to the horizon and fastening in place. The gaps between it and the floor are sealed (mortar or sealant, depending on the materials of the opening element and the base).

Surface design. Finishing a wooden threshold involves installing a covering metal frame. You can take a piece of channel of the appropriate width; sheet iron with which the block is beaten. In terms of decoration, painting steel is not difficult. But given the increased abrasion of this part of the opening, it is advisable to use stainless steel. As you know, white color belongs to the category of neutral, and therefore this finishing of the threshold for the door at the entrance will suit any block structure.

If the site was arranged during the installation process, then it must also be prepared. When applied to a concrete base, tiles at the front door will come in handy. The range of these products is large, and choosing an acceptable shade and texture is not difficult.

The threshold for a private house can be built from brick or concrete; strength and durability will be ensured. But in any case, you will have to work with the solution and import materials (for the same formwork). A simpler solution is to buy a ready-made threshold; in furniture stores they are sold in various modifications. But installing such an attractive structure as a guillotine on the front door is impractical. It is installed into prefabricated panels using special tools, and given the complexity, this work cannot be done competently on your own.

For a private home, the technology described is in most cases quite sufficient. There is a choice of both materials and technical solutions. And most importantly, you can implement them yourself.

Guillotine threshold - what is it?

Such a threshold is a mechanism that, when the door is open, falls down and does not interfere with normal movement. With its help, you no longer need to constantly raise your feet when entering the apartment. This is very convenient, because remember how many times have you accidentally tripped, forgetting to lift or lifting your leg to a lower height?

Guillotine threshold

The guillotine has several advantages that make it very popular and in demand in the world of thresholds:

• The seal has a very good stroke, allowing you to hide significant gaps
• Acceptable cost
• Easy installation and replacement
• This threshold has a long service life - 200-250 thousand openings
• Excellent thermal insulation and sound insulation performance

Decorative decoration of the entrance to the apartment can be varied and is carried out strictly according to your taste preferences. Some people use tiles, some like painting, and others, deciding to save money, use conventional linoleum decoration. In any case, the finishing must be of high quality and fit into the overall interior of the room. The functionality of the threshold and its appearance can not only protect the interior from the cold, but also somehow complement the appearance of the room.

Why is it needed?

In many cases, a threshold at the door is needed to complete the design of the entrance space. Decorative strips are used only for interior passages. Street doors simply require the installation of this element to protect the room from dust and dirt.

But there are also rooms inside the house for which it is recommended to install a threshold at the entrance. This is a bathroom, due to the high humidity in it. In the kitchen it is required to avoid the spread of odors from it throughout the apartment. On the balcony door it is needed to protect the room from street dust.

Functions that the threshold performs:

But in most cases, the element is necessary to level out floor differences between rooms. The threshold at the front door is needed as a transition from a lower street surface level to a higher one in the apartment. It also helps protect the premises from intruders. The design may have a groove into which the bolt of an additional lock embedded in the door fits.

Level difference

Brass and aluminum floor thresholds for different purposes are made from 3 types of profiles:

• flat (the upper side may have a convex shape);
• corner (transitional step, difference in the thickness of adjacent floorings);
• T-shaped (for installation at the joints of materials of different structures, for example, tiles/laminate/parquet).

Where the difference in levels forms a clearly defined step, an angular profile is installed to maintain the integrity of the edge and protect the legs.

The structure for multi-level transitions can be prefabricated or solid (with a given angle of inclination and width of the closing surface).

Decorative design

Many owners think about how to finish the threshold after installation is complete. If it was made of wood, then it is logical to carry out work to coat the product with varnish, paint or a special solution to protect it from moisture and dirt.

Brick or concrete products are best decorated with tiles or laminate. One of the cheapest methods today is finishing with linoleum. It's inexpensive, but not particularly durable.

How the threshold of an apartment or room will be finished depends on the preferences and fantasies of the owners of the house. In any case, it is necessary to carry out work on installing the product efficiently. After all, such things are not made for one year.

A properly installed and finished threshold will not only protect the room from the cold, but also give a complete look to the entire room.

Materials for the threshold at the front door

Metal threshold for the entrance door to an apartment
Many types of raw materials used in the construction of walls are used to install the threshold. Often they choose a material that harmonizes with the door.

Tree

This is one of the most common materials, aesthetically attractive and suitable for wooden panels. Installation, replacement or repair of such a structure is much easier than metal or cement. It also has good noise and heat insulation properties. Oak is best suited - its wood is durable. It is possible to use other rocks, the main thing is that the material is hard. Before installation, raw materials must be treated with compounds that prevent fire and rotting.

Metal

Wooden thresholds are installed in private homes

Such a threshold will be characterized by maximum wear resistance. Another plus is the possibility of installation in industrial premises, including where the air contains a lot of moisture. The product is not afraid of corrosion. It is recommended to choose a steel or brass profile - these materials are very durable. The threshold is installed quite simply; self-tapping screws are suitable as fastening elements.

Brick

This is a fairly durable material and is also easy to obtain. A brick threshold is well suited for buildings whose walls are also made of it.

Plastic

Due to their low price, such products are quite popular, but they do not differ in durability and resistance to sunlight. However, it is acceptable to use them for the interior door of a room, especially if it is also made of plastic.

Cement

Threshold made of cement and ceramic tiles

The cement threshold is durable and lasts up to half a century, while the cost of funds will be quite small. Another plus is good waterproofing.

Typically, such designs are made for the external entrance door, as well as for the balcony.

For finishing, you can use decorative panels that are resistant to moisture. If the door to the opening is already installed, it will be more difficult to make such an element.

How to choose size and material

If you choose entrance door leaves of the required dimensions complete with a protrusion, the issue of purchasing it will be resolved on its own. Otherwise, you can purchase door thresholds yourself. It is important to decide which material is suitable for the room.

Wood is a high-quality and not too expensive material. The most reliable and durable will be wooden ledges made from oak, hornbeam or pine. These structures are installed both to complete the design of the front door from the inside and to divide the interior space.

You can easily install a wooden product with your own hands. Disadvantage: wood requires careful operation. It is recommended to update the appearance of the ledge annually with a new paint job.

The strongest and most durable thresholds are metal. They come in aluminum, steel, and brass. The shape of the structure is also different.

Plastic ones are mainly used only when installing metal-plastic door leaves. Rare use is explained by the fragility of the plastic and possible deformation during prolonged exposure to sunlight.

Concrete or stone ledges can be installed at the entrance opening from the street or for balcony doors. Decorative design may vary. For example, a laminate can be used to cover a threshold. In interior spaces, the installation of such structures is undesirable. Their weight and volume are quite large.

The plasticity and flexibility of cork is suitable for different floor surface levels in one or adjacent rooms.

The entrance opening and the door leaves themselves are now manufactured in standard sizes. However, in old houses structures of non-standard shapes and dimensions can be installed. Therefore, it is recommended to carefully take measurements before purchasing the product.

Profile Features

Thresholds are made in a wide variety of colors and sizes Thresholds are made in a wide variety of colors and sizes. Various materials can be used in the base. But the fastening of different models can be either hidden or open. Each method has its pros and cons. An open mount is easier to install, and the threshold design is more reliable and simple. Closed fasteners are more difficult to install, but they have a completely different appearance.

The price of this product is based on the cost of the material. Aluminum and brass interior thresholds will be more expensive than plastic ones. The cost of wooden samples for parquet depends on the type of wood. But, no matter what threshold you install, it needs care, otherwise the expensive part will very quickly become unusable.

Where are the most expensive new buildings in the Moscow region?

Let's sum it up

To install such a door, you need to take into account all aspects of the legislation of the Russian Federation. Is it legal to install a door on a landing? How and with whom to coordinate the installation of a vestibule door? What documents are needed? We answer all questions in the article.

has a wide partner network, including in cities such as Moscow, St. Petersburg, Novosibirsk, Voronezh, Saratov, Samara and another 120 cities in Russia and the CIS countries.

www.torex.ru is the official website of the Torex company. This website is for informational purposes only and under no circumstances constitutes a public offer as defined by the provisions of Article 437 of the Civil Code of the Russian Federation. To obtain information about the cost of Torex products, please contact official dealers.

Prices in showrooms may differ from prices on the website. For current information on the cost of Torex doors, check with official dealers in your city.

The manufacturer reserves the right to make changes to the list and specifications of products at any time. For valid product information, please contact authorized dealers.

* All fields are required

By clicking on the button, you consent to the processing of your personal data User Agreement

Source

Installing a wooden threshold for a door

The wooden threshold may be an element of the door frame, in which case it can be restored or replaced.

Installation of a wooden vestibule is quick, so replacing or repairing it is not difficult. If small irregularities have formed on it, then it is enough to sand it, coat it with varnish or paint to match the color of the front door.

Materials and tools:

wood boards; scrap; hacksaw; saw; vacuum cleaner; nails; drill; dye; varnish

Before replacement, you need to dismantle the old threshold. If the threshold does not protrude above the floor, then it can be removed using a lever. Take a crowbar and hammer one end under the threshold, and then press the other end.

Before removal, remove the threshold that rises above the floor from nails and knock it out with a hammer. If it is impossible to knock it out entirely at once, cut it into several pieces with a hacksaw and then remove it.

Before installing a wooden threshold, make sure that the front door fits snugly against it.

Collect dry debris with a vacuum cleaner. It is recommended to wipe the surface itself with a cloth. You can make the threshold yourself or buy a ready-made one. If it is larger in size than necessary, then part can be sawed off. You can secure the wooden structure with ordinary nails.

To prevent cracks from forming when hammered, drill holes of the required diameter. Before proceeding with installation, check how the front door closes. If it fits well to the ledge and opens and closes freely, then you can begin installation. To finish the job, paint or varnish.

You can cover the threshold with the coating that is in the hallway. If there are tiles in the corridor, then the threshold can also be covered with tiles. This finish looks beautiful and the renovation will look complete.

Any cracks that form during such work must be plastered. Once the solution has hardened, apply silicone putty. This will block the path to cracks from vibration.

Wood is not a durable material. Therefore, for this design it is better to choose durable wood. If you make the threshold yourself, then use oak, ash, beech, or larch. From the selected block of wood, use a chisel to form a threshold no more than 30 mm high.

When buying a finished wooden product, do not skimp on quality by purchasing a cheap option. It can be made from soft rocks. And this will lead to rapid wear and damage under load.

In order for wooden thresholds to last longer, you need to carefully treat them so that moisture does not penetrate into the cracks when washing the floors.

Metal thresholds are usually installed from stainless steel, aluminum or brass. If a metal door is installed, it will be immediately equipped with the same threshold, which simplifies the task.

How to cover with laminate and other materials?

Concrete and brick structures need decoration. To refine the structure, you can use materials such as:

The cladding is carried out in continuous slabs or in fragments. The concrete is pre-treated with concrete contact. Tile adhesive or cement-sand mortar are suitable for fixing.

How to sheathe the threshold:

Before installation, the area of ​​the base is assessed. A marking with the future pattern is created on the plane or a panel of a suitable size is selected. Fragments of finishing are cut according to the finished markings.

The texture of the cladding is matched to the pattern of the material of the door frame, slopes and trims. When choosing wood, it is important to consider the direction of the pattern.

The threshold at the entrance doors protects the door slopes from external influences. Having selected materials and performed calculations, you can beautifully decorate the entrance area. Concrete and brick bases at the entrance doors are decorated with available building materials, which opens up scope for the implementation of most design solutions.

How to lay a floor with tiles

On old tiles

On floors made of chipboard or similar materials

Before laying tiles on a wood floor, vacuum or wash it with an alkaline detergent. If necessary, treat the surface with a primer. If the floor is uneven, level it with a leveling mixture.

Installation: use special glue or glue with an additive and a special plastic joint compound or mixture with an additive.

2 Installation materials

It is necessary to lay the tiles in such a way that each new row of tiles ends at the front door to the room or at the main entrance.

2. Before laying the tiles, lay the tiles, without gluing, along the drawn axes to the walls of the room.

Don't forget to take into account the width of the seams. This adhesive-free trial of tiles, called a "test run," will allow you to select the optimal tile placement and avoid unnecessary cutting. In order to understand how to lay tiles correctly, start by gluing the tiles near the wall opposite the entrance.

5 Applying glue and gluing

Laying tiles yourself using the gluing method is the easiest way to lay tiles. All steps described below (1 to 6) must be repeated for each surface area measuring 70 x 70 cm.

2. Place the tiles on the adhesive. To lay tiles measuring 20 x 20 cm or more, apply two layers of adhesive: on the floor and on the tile. To glue the tiles, just apply a thin layer of glue to it using a trowel.

4. How to lay tiles evenly?

Check the flatness of the surface of the laid tiles. Level any protruding tiles using a rubber mallet or wooden block. The wooden block should be placed on several tiles at the same time.

5. Don't forget to remove the plastic crosses before the glue hardens.

2. Place the tiles on the adhesive. To lay tiles measuring 20 x 20 cm or more, apply two layers of adhesive: on the floor and on the tile. To glue the tiles, just apply a thin layer of glue to it using a trowel.

3. For rounded cutting: Apply adhesive tape to the surface of the tile to be cut, which will avoid nicking the enamel, and drill holes along the perimeter of the intended rounding using a carbide drill bit (tungsten carbide)

Then, using wire cutters or tile tongs, carefully break off the desired portion.

Processing: Use a file to smooth out uneven edges.

At this stage of the work, the plastic crosses must be removed from the seams.

Using a soft rubber trowel set at an angle, apply the grout mixture to an area of ​​approximately 1m2 of tile and spread it so that it completely fills the grout lines. After a few minutes, wipe the tiled surface with a damp sponge.

After tiling and grouting are completed, mask the seam around the perimeter of the room (expansion joint) by gluing the baseboards along the wall.

9 Additional tips

• Use tiles from different packages at the same time to ensure a more uniform color.
• If you want to understand how to lay tiles on an outdoor floor, cladding with marble or other non-standard materials, consult with our consultants, they will provide you with the necessary information.
• Wipe the tiles with water and cleaning agents that do not scratch the surface and do not contain grease. And then rinse with clean water.

Threshold surface finishing

You should be especially careful when finishing the threshold.

Door sill finishing options

After all, the success of the renovation transformation depends on the quality of this process. It is important to study the design options for the threshold to choose the right one for your apartment or house. Please pay attention to the following areas:

Options for finishing interior thresholds

Each room has its own characteristics of finishing the threshold surface. Therefore, you should pay attention to the recommendations and design rules. Watch the video: review of the ideal threshold to the bathroom.

Finishing the balcony threshold

Finishing the threshold to the balcony is a responsible and important mission. In addition to visual transformation, such a threshold will help retain heat in the room and ensure comfortable movement around the space.

The threshold of the balcony also protects the floor covering of the room, protecting it from moisture and fungal growths that can enter the room from the street.

There are several options for finishing the threshold of a balcony door; each owner of a house or apartment will be able to choose the best one according to his preferences and financial capabilities. The following ideas should be taken into account:

Preparing to pour a concrete threshold on the balcony

Existing options for wooden door thresholds

Any of the options is perfect for fulfilling the mission of installing a threshold under the balcony door. The main thing is to carefully study the nuances and features of working with each material.

Brick threshold

If the building is brick, then such a threshold will ideally suit the overall picture of the house cladding. In order for the design to be completed at the highest level, you should prepare for the process. The sequence of finishing the balcony threshold with brick is as follows:

Preparing the surface for a brick threshold

The process of laying a brick threshold

Wooden balcony threshold

Mounted wooden threshold

Plastic balcony threshold

Many people prefer plastic coverings. This material perfectly repels moisture from the inside of the threshold and protects the surface from corrosion. The work should be carried out in this order:

Option for installing a threshold using plastic panels

This option has many advantages, such as:

But there is also a drawback that is quite significant. Plastic is a short-lived material. Therefore, the duration of its operation is no more than 2 years. Due to the fact that the threshold is a structure that regularly bears loads, cracks and deflections may appear on the surface over time.

Design options for plastic thresholds on the balcony

But if a temporary option suits the owners of a house or apartment, then a plastic threshold may well be the choice.

Entrance door threshold

The entrance door threshold can be arranged in several options. If we are talking about the front door of a private house, then you should pay attention to the same finishing ideas as in the balcony threshold. The only thing is that you should exclude the option of a plastic threshold, because it is unlikely to look aesthetically pleasing against the background of the facade of the house. Although, if the sheathing is made of siding, then a plastic threshold is quite suitable.

Entrance door threshold device

When it comes to the threshold of the front door in a high-rise residential building, most often they choose one of the following options:

Example of a tile threshold

Design of a wooden threshold at the front door

Metal thresholds

As a rule, the size of the threshold is adjusted depending on the height of the difference, which is measured by the building level. The metal threshold can be:

Installation of an aluminum threshold at the door

Installation process

You need to act one by one and harmoniously, the sequence of work is as follows:

After completing the above processes, the issue of setting the threshold for the front door can be considered completed.

Tile threshold

If you plan to install a wooden door, then you can pay attention to a finishing option such as laying tiles. The procedure is as follows:

Pouring the threshold with concrete

With this finishing option, the front door opening will look aesthetically pleasing and neat.

Wooden threshold

When equipping a wooden threshold, the same materials and tools are used as when finishing the threshold of a loggia. The installation technology is also no different.

There is an important nuance to take into account. If you plan to install a heavy, bulky door, then the wooden threshold may become deformed under it.

In this case, it is better to give preference to a metal or tiled threshold; they are stronger and more durable.

Wooden thresholds in section for interior openings

When installing a structure under the front door, you should take into account the functions of the thresholds. This elevation should provide protection from drafts, cold and dust. Therefore, when designing the entrance door threshold, these factors should be taken into account.

Finishing the interior threshold

When it comes to finishing the threshold under interior doors, owners can take into account any decorating ideas. After all, the space under the interior doors of the kitchen, hallway, bedroom or nursery is least susceptible to external influences. Therefore, it is possible to carry out finishing with different materials, either laminate or with the installation of plastic thresholds. Naturally, before making an interior threshold, you need to first decide what exactly it will be.

An example of finishing a threshold with linoleum

A wooden, plastic, tile threshold is made using identical technology as in the case of finishing a balcony or entrance door threshold. When it comes to finishing the interior threshold, an additional option appears - laminate and drywall.

Finishing the interior threshold with laminate

The process of creating a laminate threshold is similar in technology to installing a wooden threshold. It all depends on what kind of laminate is selected for the mission. If you choose a laminate that is assembled using a lock pattern, you should carefully adjust the height so that the structure is neat and uniform.

For strength, a concrete niche of the required height is poured under the laminate, and after that the laminate is mounted on top of the frozen hill. Everything is simple, the main thing is to get into the grooves of the laminate locks and create a structure of the desired shape.

Types and device

Thresholds are of the following types:

• Entrance – installed at the entrance to the house (apartment, building);
• Interior – mounted in the opening in the bathroom or shower room. Many people do not understand why a threshold is needed inside the apartment at the entrance to the bathroom. It's very simple: if a water breakthrough occurs in a given room, it will become a boundary that will not allow flow into the rest of the apartment. Some install this limiter in order to isolate the entire apartment from excess moisture coming from the bathroom. In addition, no one forbids installing a threshold in the hallway or near the doorway in the kitchen;
• On the balcony - this is a necessary element, as it retains heat in the apartment and prevents dust from getting inside. In this case, the threshold from the outside should be, first of all, functional, and from the inside – beautiful and matching in design with the overall design of the room.

Among the types of this design, there are models with an interesting and unusual name - guillotines. They are attached to the end of the door. When the door closes, they move down and completely tear off the gap between the floor and the door.

Some doors are already sold complete with a threshold. Which is very convenient, since you don’t need to waste time searching for the required copy. If such an element is not available at the door in finished form, it can be purchased separately and installed independently.

The range of construction stores is quite diverse. Finding the right product is not difficult. On sale you can see thresholds made from inexpensive materials as well as quite expensive ones. Thresholds are made from the following materials:

Wood is an inexpensive option. There are both interior and entrance wooden thresholds. Its quality depends on the type of wood. Oak, pine, and hornbeam are considered the strongest and most wear-resistant. A special feature of wooden models is the need for careful care and annual painting. Plus - wood is easier to install.

Are thresholds insulated and what is the best way to do this?

The energy efficiency of a room largely depends on the thermal insulation characteristics of the door structure. The threshold deserves special attention, as it creates cold bridges, causing condensation and icing to appear at the bottom of the door. This is due to the presence of gaps, a weak sealing contour and the cold properties of most of the materials used. Insulation will help correct the situation.

On wooden structures, the gaps are closed with a foam roller wrapped in leatherette, as when insulating doors. An insulating tape made of rubber or fleecy material is installed in the plane of the connector.

It is recommended to insulate a hollow metal profile by filling it with polyurethane foam after installation. Polyurethane foam has high insulating properties and retains its properties for a long time.

Types of floor thresholds

They can be divided into types according to the material of manufacture, design and installation method.

What are floor thresholds made from?

Metal thresholds for laminate flooring are most common; they are made of aluminum. They are quite practical and easy to install. But their main disadvantage is that they are taken out of the context of floor paintings. Let's say it is necessary to close the joint between the tile and the laminate, as a result, using a metal threshold we will create a conspicuous edging - a metal strip. Although aluminum thresholds laminated to look like wood are on sale today, it is often difficult to find them to match the chosen floors.

Metal thresholds for laminate flooring photo

In this sense, thresholds made by laminate manufacturers are more profitable. Such companies produce them for each decor of the laminate they produce. Therefore, when purchasing laminate, be sure to buy the original threshold for it. As a result, after installation, the threshold merges with the laminate and does not stand out against its background. The material for their production is the same as for the production of laminate - HDF board and lamination. The lights are installed in a hidden way.

Thresholds for laminate flooring photo

A separate point is flexible thresholds for laminate; they are used to connect curved joints (zigzags, semicircles, etc.) - these are rubberized thresholds and cork expansion joints. The latter have an advantage over the others, since they do not come to the surface - they remain flush with the laminate sheet. This is an ideal option for those who do not want to use a T-shaped threshold.

Flexible threshold for laminate photo

What is the design?

The type of threshold design determines its purpose; there are several types of laminate construction:

• multi-level,
• single-level,
• universal.

The first allow you to join floors located on different planes - for example, thinner laminate and thicker parquet boards.

To use the second type of thresholds, it is necessary that the floors being joined lie in the same plane.

Universal thresholds have such a design that they can be transformed into multi-level, single-level, and can also be used in cases where it is impossible to install a plinth - it is used as a finishing edge for the laminate fabric. These types include the Imncizo threshold from the Belgian company Unilin, which produces Quick-Step laminate.

Thresholds for laminate flooring photo

Methods for attaching floor sills

There are two types of fixation - thresholds for laminate with hidden fastening and open. The former are, of course, more preferable, since after installation the fastening elements are not visible. They come in HDF(MDF) and metal. The HDF design has two profiles - working and decorative. The working bottom one is fixed directly to the base, and the second decorative one is simply inserted into it. Metal thresholds with hidden installation have a slightly different design; they do not have a lower profile - we will look at them in more detail using an example of installation in the section below. But the type of thresholds with open fastening, after installation, will look less aesthetically pleasing, since it is mounted through the end-to-end method - with self-tapping screws through the decorative layer.

Thresholds for laminate flooring photo

What types of structures can be installed in an apartment?

Thresholds are classified according to the materials from which they are made:

Some specific types are made from cork and PVC.

Metal

To decorate metal structures with your own hands, use alloys from materials such as:

Aluminum profiles are more popular:

Such planks are not distinguished by aesthetics, they have a sliding surface, therefore they are decorated with corrugated elements made of wood or plastic.

Advantages of metal thresholds:

Installation of a metal profile does not require skills or special tools, since it is simply fixed with self-tapping screws. To secure low planks, it is permissible to use tile adhesive.

Wood

To decorate the threshold with wood, you can use only hard types of wood, such as:

Their range is large: it’s easy to select by texture, color, pattern. The tree is beautiful, but difficult to care for; it requires periodic renewal of the protective coating and frequent cleaning.

Advantages:

Wooden planks can be made independently from hardwood timber. Disadvantages include the need to renew the protective coating, periodic painting, and vulnerability to moisture.

Concrete

More expensive, but the most durable option. Concrete thresholds are difficult to install and are poorly suited for installation in openings with built-in doors. Installed at entrance and balcony doors. Peculiarities:

If chips or cracks form in the concrete base, complete dismantling of the coating and doors is required. Optimal for finishing thresholds in private homes. The threshold must be filled with a mixture of cement and sand with the obligatory addition of a plasticizer, as it is necessary to impart plasticity. High thresholds can be constructed of brick.

Technology for installing an interior threshold

There are many ways to install interior thresholds. However, they all start with measuring the joint in the flooring that needs to be covered. After measuring its length, the resulting value should be noted on the purchased threshold, and the excess material should be cut off with a hacksaw or grinder. Otherwise, the complexity of installing the threshold depends on the type of its design.

Installation of thresholds with an open fastening system

Installation of thresholds of this design is very simple. In this case, profiles are used that have ready-made holes for fastening, drilled with the same pitch. To install such a product in a doorway, you need to attach it to the floor and mark the attachment points on it. After this, according to the resulting markings, you should make holes of the required diameter, install plastic dowels in them and secure the threshold with screws.

The fastener must fit tightly into the holes of the threshold, otherwise over time it will weaken and fall out. If there is a wide gap between the coatings, you need to select the appropriate threshold for it. In order not to spoil its appearance, it is recommended to buy screws with decorative caps for fastening.

If the joint of floor coverings has different levels from 3 to 20 mm, you can use a wide threshold, which is fixed at an angle, or a transition profile to disguise it.

Installation of thresholds with a closed fastening system

It is often chosen for aesthetic reasons. In this case, strips with floating internal holes intended for fastener heads, or special thresholds consisting of two parts - a rail and a T-shaped profile, can be used.

To attach the plank, you first need to make holes in the floor according to the previously made markings and insert plastic dowels into them. After this, the screws must be carefully inserted into the slot on the plank and turned over so that all fasteners fit into the installed dowels. Then the threshold should be fixed by slightly pressing it to the floor and tapping it with a hammer through a layer of paper to avoid damaging its surface.

To secure the T-shaped threshold, you should also drill the required number of holes in the floor and insert dowels into them. After this, the threshold strip must be fixed to the surface using screws, and an external decorative profile must be installed on top by snapping or gluing.

Special attention is always paid to installing a threshold in a bathroom. Currently, special products are on sale that prevent water from penetrating into adjacent rooms in the event of flooding. An excellent option for a bathroom would be to install a guillotine threshold, the description of which is above.

An excellent option for the bathroom would be to install a guillotine threshold, the description of which is above.

If a wooden threshold is being installed in a toilet or bathroom, the work must be done so that there is a gap of 5-8 mm between it and the bottom of the door leaf. It is necessary for the normal operation of natural or forced ventilation, if one exists in the room.

Currently, according to many people, interior floor thresholds present a lot of inconvenience. However, those who use them are well aware that the functionality of these products is so obvious that they have a right to their existence. It is difficult to determine which of them is right. But with or without a threshold, interior doors - let it be practical and beautiful!

What should I do after installing the door device?

Before installation, you need to determine the area of ​​the future threshold. In terms of design and functionality, products differ in:

Calculation

The calculation is made based on the design solution. High thresholds with a thickness of 2 cm or more are suitable for entrance doors. The optimal thickness of a low aluminum threshold is 30 mm.
The following quantities are involved in the calculations: The threshold can fill the entire width of the opening between the slopes. For accurate measurements, it is recommended to use a building level. When measuring the width along the slope, use 5–7 cm increments to avoid inaccuracies. If the plank is fixed in the grooves, then 2 cm is added to the width (1 cm on each edge). Calculations will help in choosing factory products or formwork.

Selection of the necessary materials and tools

When choosing a material, the load, type of room, and finish of the opening are taken into account. Before deciding how to seal the opening, you need to consider the following recommendations:

Decorative planks made of wood are more demanding to maintain, but are more durable than PVC . Moisture-resistant structures must be supplemented with a cork compensator. To seal the holes you will need putty. If the decorative material is light enough to be mounted with glue, use tile adhesives.

How to install and cement?

Stages of installing a high concrete threshold:

After drying, the formwork is removed and the surface is decorated. For a low threshold, take aluminum strips, which are fixed in a hidden or external way, when the heads of the screws are visible.

Installation steps:

With the hidden fixation method, self-tapping screws together with dowels are inserted into the longitudinal groove of the plank. Then the threshold is fixed on the base and tapped with a hammer through a sheet of plywood or timber.

Working with an opening

The vacated opening must be prepared for installation of the box. Surfaces located inside should be leveled if necessary. To install the door correctly, you need to take all measurements accurately. To do this, you need to estimate them using a certain formula: take the width of the door, add double the thickness of the timber to it, taking into account a gap of 2-3 cm. The height of the opening is calculated using the same method.

If the box exceeds the required dimensions, it should be reduced. There is no need to be afraid of this, since this work is much easier to do than by enlarging the opening, especially if the wall is made of concrete.

Reducing the opening

But when reducing the thickness of the side of the box, you shouldn’t get too carried away, since you can remove a maximum of 15 mm from the beam.

It is better to reduce the value from the piece of timber that will contain the lock strike plate. This is due to the fact that this part bears a small load during operation. When installing the box, it is necessary to maintain a gap of 10 to 20 mm in order to subsequently fill it with a special sealant.