How can you seal a pool, how to seal a pool with water, swimming pool repair Intex

Why does water decrease in frame pools?

The frame is a structure that ensures the stability and preservation of the shape of the pool. Unlike inflatable tanks, frame tanks are larger in size and more durable. The bowl can be made of high-density polyvinyl chloride film or multilayer vinyl in combination with polymers. And often this fabric is torn or cut through.

Note! During the hot season, water begins to evaporate too rapidly and many people think that it flows away through damage to the bowl, which in fact is not there. Therefore, before sealing a frame pool, you need to determine the exact location of the leak.

To find out if there is damage, take a large bowl and fill it with water, marking the level with a mark. A level mark is also placed on the wall of the pool. If the liquid evaporates almost evenly during the day in both containers, then there is no leakage.

Using such a bucket you can check the integrity of the pool bowl Source yandex.net

The main reasons for the decrease in water in frame pools include:

Leaking gasket in the filter
Drain valve failure
Damage to the suction pipe

To find a leak in a tank, a visual inspection alone is often not enough. This is where special dyes come to the rescue. They are a colored powder that needs to be sprayed into water near the suspected defect. If there is a gap, the paint will immediately be sucked in.

To diagnose leaks in the filter and pump system, the entire system is briefly turned off. And if the water level stops dropping sharply, then the problem is in the equipment.

But most of all we are interested in such a problem as a puncture of the bowl. In this case, the pool will have to be sealed.

Additional recommendations

The instructions for any pool made of polyvinyl chloride contain a list of recommendations, adherence to which will help protect the product from possible damage. Its main provisions are:

when unpacking the package with the pool - a thick cardboard box - there is no need to use sharp cutting objects;
the place for the pool is prepared carefully, freeing the area from any small things that could pierce or cut its bottom - stones, twigs, shards of glass or plastic;
It is advisable to cover the area under the bottom of the pool with a special bedding, however, a piece of linoleum, thick tarpaulin, or at least an old carpet will also work;
Pets are not allowed near the pool;
You should not pour more water than the required volume and pump its inflatable parts so that any of the seams do not burst;
you cannot stand with your feet on the sides, much less jump from them (unless this is permitted by the instructions);
on vacation, the grill or barbecue fire should be placed away from the pool;
PVC products should be stored where there are no rodents - often it is mice that cause great damage to expensive models stored in a pantry or garage.

Another important point: it is necessary to monitor children's toys. It is advisable that there are no potentially dangerous objects in the pool. You can damage a regular, and not reinforced, as in large-sized products, PVC coating by hitting a plastic rake, a pencil, or a doll's hand.

If you carefully follow all the tips, the service life of inflatable pools is several years. Considering the ease of use, this completely pays for their cost, bringing a lot of fun to children and adults. If you have doubts about your own abilities, it is better to contact a specialized workshop to repair a damaged product.

What are pools sealed with?

It is immediately necessary to make a reservation that pools are sealed only with waterproof compounds and tapes. In general, inflatable and frame bowls are made of polyvinyl chloride or polymer fabrics, so any adhesives adhere well to them.

Tape or Band-Aid

If you have a question about how to seal a frame pool, you can remember adhesive tape. This is material for quickly troubleshooting problems.

Adhesive tape for swimming pools Source yandex.net

Here is what the sequence of actions looks like when working on sealing the bowl with adhesive tapes:

The puncture site is marked with a pencil or marker
The surface in this place is cleaned of dust and dirt, and then degreased with an alcohol solution.
Tape or adhesive tape is applied to the damaged area.

Using such materials, only urgent repairs can be made. The result will not be durable and soon you will have to use more reliable means.

See also: Catalog of companies that specialize in complex installation of internal engineering systems

Repair kit for swimming pools

You can buy a repair kit in the same place as the pool. Although it is not cheap, it is still the best option for eliminating leaks. The kit usually includes glue and several vinyl patches.

Repair kit for sealing pool leaks Source yandex.net

Working with the repair kit is easy. First, a small one is cut out of a large patch, sufficient to cover the specific damage. Then apply glue to both contacting surfaces, apply and press the patch. It is best to put this place under a press.

Be sure to check it after any patch has dried. Pour some water into this place and try to squeeze it out. If no bubbles or streams come to the surface, then the pool is sealed well.

Waterproof glue

Another good option than sealing an inflatable pool. You can buy it at almost any construction or hardware store. However, only compounds that can glue polyvinyl chloride are suitable.

The result of such repairs will be durable and of high quality. Vinyl adhesive is resistant to moisture and, after drying, is not subject to mechanical stress such as compression and tension. Therefore, it is well suited for inflatable pools.

The pool can be sealed with regular PVC glue Source yandex.net

You can also use two-component adhesives. Their peculiarity is that before use you need to mix the components, which are stored separately.

Features of working with some models

The choice of method for restoring the seal depends on the pool manufacturer.

Bestway

First you need to find the puncture site. You can use a sealant to repair minor cracks. If the hole diameter exceeds 1 mm, then a patch must be used. Before carrying out work, you need to clean the material from dirt using a soft brush. After this, the surface is degreased. Particular attention should be paid to seams that are subject to high loads. A weight must be placed on the sealed area to increase the reliability of the fixation.

Patches need to be cut in the shape of a circle or oval. The presence of corners will lead to peeling of the material due to the constant movement of water flows. There should be no air bubbles in the connection area. The duration of drying of the adhesive under pressure is 12-24 hours. The pool owner can use roofing bitumen tape, which will restore the seal. Waterproof sealants are used to fill small holes. Their composition is resistant to ultraviolet rays and does not lose its qualities in conditions of high humidity. To solder the seams, you can use an industrial hair dryer, which reliably glues both sides of the gap.

Intex

To repair an Intex pool, use a special repair kit. The composition contains moisture-resistant VinilCement adhesive, protective gloves, a set of vinyl patches and sealant. VinilCement contains polyurethane, acetone and chlorinated hydrocarbons. The product produced by Intex is highly effective. Apply glue to the patch using a swab stick. Now you need to firmly press the piece of PVC onto the damaged area. To speed up drying, the patch is heated with a hairdryer.

The pool owner will have to buy VinilCement glue separately from the main products. This is not a cheap pleasure. To save money, you can use other waterproof products. For example, you can use Moment glue. The quality of repair depends on the nature of the puncture and professional experience.

When carrying out repair work, the following sequence must be followed:

First, drain the bowl and wait until all surfaces are dry.
For minor damage, use a sealant that completely fills cracks and crevices.
To eliminate large defects, vinyl patches are used. Their size should be 2 cm larger than the damaged area on each side. To achieve a tighter connection, it is necessary to use a weight.

Elimination of leaks in Intex inflatable pools

There are several options for sealing an Intex frame pool. All the methods described above are more or less suitable in this case, but the problem is that often the bowls of this manufacturer are severely torn when damaged. Therefore, the best way is cold vulcanization in a car service center. The process technology is as follows:

The surface to be treated is degreased and cleaned
A patch is glued to the bowl material
The joint is clamped for some time with a vice

The result of such a repair will be the most durable and reliable of all options. Moreover, for a relatively low price, they will do all the work for you.

Intex pools are best sealed by vulcanization Source yandex.net

Acceptable and unacceptable methods of repairing Intex

If an Intex home pool leaks, use techniques to eliminate damage to the frame:

a special repair kit from the Intex brand (if it is not available, purchase it at a specialized store) - patches of different diameters, PVC glue, a pair of gloves;
the use of adhesive tape, available only for frame pools, since its base is rigid;
use of water-repellent glue;
applying a liquid patch;
use of sealant intended for swimming pool repairs.

Some people use inappropriate methods to repair damage.

The following techniques cannot be performed:

use fire to melt the damaged area;
use objects not intended for this purpose as patches (plasters, fabric, oilcloth);
use glue that melts the structure of the pool (for example, Moment);
the use of any methods in an insufficiently dried pool.

After sealing, the damage is rechecked. If air passes through repeatedly, the repair may have been carried out incorrectly.

Sealing a swimming pool underwater

Let us immediately draw your attention to the fact that the effectiveness of such work is very low. It is better to drain the water, dry the pool, and then carry out repairs. But if you need to urgently and briefly patch up your “pond,” then this can be done without draining the liquid. Therefore, we will tell you how to seal a pool of water.

The pool must always be sealed Source yandex.net

For these purposes, only waterproof glue from repair kits is suitable. The fact is that other compounds can spread throughout the bowl, which is undesirable if people are bathing in it. They usually take two large patches to cover the damaged area as much as possible, and apply them on both sides.

Another important point: when gluing under water, you definitely need a long and powerful force, otherwise the glue simply won’t stick.

How to seal without draining water

Repairs may be required internally or externally. A leak from the inside can be eliminated without draining the water only with adhesive tape specially designed for such work.

Flex Tape

Work algorithm:

Cut a piece of tape to the desired size.
Carefully glue the tape under water to the puncture site.
Keep the patch in the filled tank for 5 minutes.

For outside work, a repair kit for boats and a special patch for a children's pool are suitable. You can seal the leak from the outside without draining the water using sealant.

Repair kit for boats

Procedure:

The patch from the kit is pre-sanded with sandpaper and cut to a suitable shape and size.
Degrease work surfaces.
Apply glue to the patch and to the puncture site.
Press the patch tightly and hold for 15 minutes.

Special patch for children's pool

Children's pools are bright, with pictures, so these models are sealed with a special decorative patch and sealant.

Stages of work:

Surfaces are degreased with industrial alcohol (it is prohibited to use acetone and solvents).
Apply sealant to the patch in a middle layer.
Glue the patch to the hole. The correct way is to work on a slightly lowered pool for better gripping efficiency.

How to prevent pool leaks

The best thing to do is not to repair a faulty pool, but to prevent a puncture. And there are a few simple rules for preventing leaks:

There is no need to use sharp objects during installation and maintenance of the pool.
Inflatable pools cannot be left in the sun for a long time, because the pressure in the air chambers increases sharply, causing the material to deteriorate and tear
The pool must be installed at a distance from trees and bushes and on a flat surface

In addition, to prevent leaks, a plastic film is placed under the pool and access to it is limited for pets.

It is better not to let pets swim in frame and inflatable pools Source yandex.net

What do you need to remember when working?

When working with glue, you must follow the following rules and sequence of work:

Before gluing, it is necessary to drain the water from the pool.
Wipe the area where the patch is applied with a rag and dry with a hairdryer.
The area for the patch and the patch itself are degreased with alcohol or nail polish remover.
Glue is applied to the pool liner and patch.
After 2-3 seconds, the patch is installed in place and pressed firmly for 10-15 seconds.
After this, the repair area is placed under a press for 24 hours for final drying.

The most important, interesting and useful information regarding inflatable pools is in this section.