Ceresit CE 40 Aquastatic water-repellent grout for joints up to 10mm

Properties

Ceresit CE 40 grout has high quality characteristics and properties:

• The color range includes 37 colors, the shade of which lasts throughout its entire service life.
• The composition contains components that prevent the spread of fungus and mold.
• Frost and water resistance.
• Water-repellent effect.
• Suitable for outdoor and indoor work.
• Suitable for floors with underfloor heating system.
• Contamination is easily removed.
• Does not deform over time and under mechanical stress.
• Does not contain toxic substances.

This grout is used to seal joints up to one centimeter wide. Suitable for both horizontal and vertical work. Applicable to ceramic, stone, glass tiles. Provides adhesion to all planes.

The grout joint will acquire its full color after drying in a day or two. This also depends on the air temperature where the repair work is being carried out. The dry composition differs in shade from the finished one, so it is difficult to determine from it what color the seam will turn out to be.

Ceresit CE 40 Aquastatic water-repellent grout for joints up to 10mm

CE 40 Aquastatic elastic water-repellent grout from Ceresit is designed for filling joints whose width does not exceed 10 mm. It has excellent performance properties that allow it to be used for filling joints between ceramic tiles, glass mosaics, stone and marble tiles indoors and outdoors. A special feature of this grout is its high level of elasticity, which allows it to be used on substrates that are deformable and subject to temperature changes. Such bases include plasterboard surfaces, open areas, balconies and terraces, heated floors. This is the best option for joint filler for rooms with high levels of humidity, including swimming pools and bathrooms. Thanks to the hydrophobic properties of the grout and Trio Protection MicroProtect additives, it has a high level of resistance to mold and mildew. CE 40 Aquastatic elastic water-repellent grout is a dry mixture. It consists of cement, polymer modifiers and pigments, as well as mineral fillers. It is supplied in special polymer buckets, which ensures high-quality storage of the mixture. To prepare the grout, you need to add water to the dry mixture, and it is very important to maintain the proportions. The solution must be homogeneous, viscous and elastic.

Elastic water-repellent grout CE 40 Aquastatic has a high level of abrasion resistance. It does not crack due to temperature changes, maintaining its beauty. Joint filler is able to withstand heavy surface loads, it is resistant to mechanical damage and various contaminants. Thanks to the bactericidal properties, dust does not accumulate on the surface of the seams, which prevents the growth of bacteria. Moisture-resistant grout is excellent for filling joints between facing materials in rooms with high humidity levels. In addition, it is resistant to mold and mildew. Elastic water-repellent grout CE 40 Aquastatic is environmentally friendly and fully complies with hygiene standards. The surface of the grout after hardening is glossy and smooth. The rich color will perfectly highlight the facing material. In addition, the joint filler of this series is presented in a rich palette of original shades, including bright and rich colors. At the same time, the cost of related products for tiles in this series is quite affordable.

Color spectrum

The color range is represented by 37 color shades. They can be divided into four groups:

• Earth – shades from natural beige to dark brown.
• Air - shades from white to blue.
• Fire is a combination of several varieties: graphite, yellow, pink, burgundy, etc.
• Water – shades from light green to purple.

Characteristics

• Composition: mixture of cement, mineral fillers, pigments and polymer modifiers
• Bulk density of dry mixture: 0.95 ± 0.1 kg/dm3
• Amount of mixing water: 0.6 – 0.64 l per 2 kg of dry mixture
• Density of the mixture, ready for use: 1.75 ± 0.1 kg/dm3
• Mobility along cone immersion, PC: 7.5 ± 1.0 cm
• Consumption time: at least 2 hours
• Application temperature: +5 to +30°C
• Possibility of technological passage: after 8 hours
• Compressive strength at the age of 28 days: not less than 15 MPa
• Tensile strength in bending at the age of 28 days: not less than 3.5 MPa
• Adhesion to concrete at the age of 28 days: not less than 0.6 MPa
• Achievement of full hydrophobicity: after 7 days
• Frost resistance of hardened mortar: at least 100 cycles (F100)
• Operating temperature: –50 to +70°C
• Flammability group: NG

Instructions for use

Grouting work is carried out if the temperature is within 5–30 degrees and the humidity does not exceed 80 percent. The distribution of the mass must occur evenly, otherwise there will be a difference in shades in individual areas.

It is necessary to calculate in advance the required amount of material in order to buy a mixture of one batch. This will allow you to fill the seams in one tone. Different batches may vary slightly.

Grouting work is carried out using plastic, silicone and stainless steel objects.

During the day after the end of the process, the coating should be kept out of reach of solar radiation and heat. This will cause the seams to dry out and crack. The surface should not be exposed to water for a week. If work is carried out outdoors, then it is necessary to make a covering for protection.

If grouting is done on a floor with a heated floor system, then the coating must be cooled. It is better to turn off the system in advance (recommended two days in advance). Further activation after three days.

Detailed description

Article No. 2406528

4.5
(7) Read reviews of
Ceresit CE 40 Aquastatic. Due to its high elasticity, the grout can be used on deformable substrates (chipboards, plasterboard, etc.) and substrates subject to temperature fluctuations (heated floors, terraces, outdoor swimming pool baths, etc.).

Thanks to the “Aquastatic” effect (hydrophobic properties) and the “MicroProtect” formula (high resistance to fungus and mold), the grout is optimal for use in rooms with constant humidity: bathrooms, showers, kitchens, etc. Designed for filling joints of ceramic, stone (including marble) and glass cladding on floors and walls inside and outside buildings, with a joint width of up to 10 mm.

Properties:

• — has an enhanced antifungal effect (Trio Protection “Micro Protect” formula)
• - water-repellent, stain-resistant
• - easy to clean
• - elastic, resistant to deformation
• - has high abrasion resistance
• - has high color fastness
• - perfectly smooth
• - water- and frost-resistant
• - can be used on heated floors
• - suitable for indoor and outdoor use
• - environmentally friendly.

Preparation of the mixture:

To prepare the mixture, take a measured amount of clean water at a temperature of +15 to +20 degrees Celsius. The dry mixture is gradually added to the water while stirring, achieving a homogeneous mass without lumps. Mixing small quantities of grout is done manually, and large quantities are mixed with a mixer or drill with an attachment at a rotation speed of 400-800 rpm.

Then a technological pause is maintained for about 5 minutes to allow the mixture to mature and mix again.
The mixture, ready for use, must be consumed within 60 minutes from the moment of preparation. An overdose of water leads to a deterioration in the technical characteristics of the grout!

Seam filling:

The grout is applied to the cladding with a rubber spatula and distributed over its surface, gently rubbing into the seams. Excess grout is collected with a spatula and the operation is repeated again.

Cleaning the cladding surface:

After about 15 minutes, the surface of the cladding is carefully wiped with a damp, well-wrung out, frequently rinsed sponge.

Excessive moistening of the seams can lead to the appearance of different colors!

Dried plaque from the tiles is removed with a dry soft cloth no later than 8 hours after filling the joints. The technological passage is possible after 8 hours, and the first contact with water is possible after 7 days after filling the joints.

How to calculate grout consumption

In the process of calculating the required amount of consumables, the following quantities are involved:

• Tile length, mm.
• Width in mm.
• Thickness in mm.
• Seam width in mm.
• Estimated area in square meters.
• Solution density coefficient. Set for this brand as 1.75 kg.

Using the example, the required amount of dry mixture is calculated:

Specifications

Storage and shelf life

If the grouting material is stored in a warehouse, it should be placed on pallets. Damaged packages are not permitted for storage. The grout shelf life established by the manufacturer is 2 years.

If the dry mass remains after the work, then the packaging should be tightly closed and stored in a dry, dark place.

Scope of application of Ceresit CE 40 grout

Due to its excellent performance characteristics, the mixture can be used for external and internal work on vertical and horizontal surfaces. This can be filling joints in ceramic or porcelain stoneware surfaces, cladding made of natural stones, such as marble, granite and others.

High elasticity allows the grout to be used even on deformable substrates, such as chipboard, plasterboard, and fiberboard. Ceresit CE 40 is also suitable for heated floor systems, terraces and other substrates that are subject to sudden temperature changes.

In the photo, the grout is Ceresit Se 40

Modifiers for water resistance and antifungal properties - Aquastatic and MicroProtect, respectively, allow the grout to be used for rooms with high humidity levels. For example, bathrooms, showers and baths. Joint filler is also useful outdoors: it can be used for building facades or tile coverings near the pool.

The manufacturer also produces other products. Read about the benefits of Ceresit St 17 primer.

Contraindications for use: the mixture is not suitable for corner and expansion joints, as well as those adjacent to plumbing. Silicone fillers are more suitable for these purposes.

Price

The cost of Ceresit CE 40 grout is 370-590 rubles. It all depends on the packaging, the chosen color and the offer of a particular store.

But this information will help you understand where you can use epoxy grout for litokol tiles.

What is the price of grouting tiles in the bathroom and which one should be used and what name will help you understand the content in this article.

It will also be interesting to know how long it takes for bathroom tile grout to dry.

But this information will help you understand how to use moisture-resistant grout for tile joints in the bathroom and what is the consumption of this material when used.

It will also be interesting to learn about how to use adhesive for non-woven vinyl wallpaper.