Metal siding Eurobeam - a spectacular imitation of a wood-like facade

timber

Lining

Ship timber

Metal siding to look like timber - all wood-like colors and current prices for metal siding Euro-beam. Full set. Measurement, delivery and installation of metal panels for timber.

Many manufacturers of metal siding produce facade panels that imitate a wall made of timber with beveled corners.

An additional resemblance to wood is given to the material by a polymer coating that replicates the wooden surface.

Single or double panels are available, but their appearance is approximately the same.

Download price:

Completed objects

Eco-beam, Golden wood
Eco-beam, Bleached oak

Eco-timber, Antique oak

Vinyl siding imitation timber Tecos Lux

• Rounded timber
• Double rounded timber

• Length: 3660 mm
• Width: 203 mm
• Area: 0.74 sq/m
• Packing: 18 pieces/box
• Weight: 33.46kg/box
• Coverage area per package (m2): 13.32

Color spectrum

• Length: 3660 mm
• Width: 230 mm
• Area: 0.84 sq/m
• Packing: 18 pieces/box
• Weight: 37.85kg/box
• Coverage area per package (m2): 15.12

Color spectrum

Vinyl siding under timber Tecos Naturalwood

• Ship timber
• Cylindrical timber
• Double rounded timber

• Length: 3660 mm
• Width: 230 mm
• Area: 0.84 sq/m
• Packing: 18 pieces/box
• Weight: 34.85kg/box
• Coverage area per package (m2): 15.12

Color spectrum

• Length: 3660 mm
• Width: 203 mm
• Area: 0.74 sq/m
• Packing: 18 pieces/box
• Weight: 33.46kg/box
• Coverage area per package (m2): 15.12

Color spectrum

• Length: 3660 mm
• Width: 230 mm
• Area: 0.84 sq/m
• Packing: 18 pieces/box
• Weight: 34.85kg/box
• Coverage area per package (m2): 15.12

Color spectrum

Metal siding imitation timber Metal profile Woodstock®

Specifications

Pros and cons of metal siding

Advantages

1. The main advantages of metal are strength and wear resistance.
   Externally, these are metal panels (sheets) curved in the shape of a log or board. However, each of them is multi-layered: - its basis is a metal sheet made of galvanized cold-rolled steel, treated with an anti-corrosion agent, or aluminum; — next comes a layer of primer that reliably connects the paintwork to the base; - then - the base polymer, applied on both sides, in order to provide the metal with additional protection against corrosion. This polymer is responsible for imparting color and texture and can be applied in several layers; — everything is covered with varnish or a protective coating that does not allow the paint to wear off and fade under the influence of the external environment; — a film is applied on top, providing additional protection during transportation. After lining it is removed. As a result, the material will not swell or dry out, as is often the case with wood; it is not afraid of fungus and mold, corrosion and temperature changes ranging from -50 oC to +80 oC. All this provides the opportunity to serve from 30 -50 years or more. In addition, the materials are environmentally friendly and do not emit harmful impurities when heated.
2. Fire safety, the reason for which again lies in the materials, because they cannot be classified as flammable or combustible. The maximum that threatens siding is loss of shape under the influence of temperatures above +100°C.
3. Cheap - compared to natural wood. Not to mention the fact that it is often easier not to build a new house from logs or beams, but to clad an existing one.
4. Simplicity of installation, which can be carried out in any season, maintenance, which does not require expensive products and special skills, and repair, in which it is enough to replace the damaged part.

The undoubted advantage of wood-look metal siding is its aesthetics, especially since it does not fade in the sun. Of course, such a list of advantages does not allow it to completely replace wood: it also has serious disadvantages.

Metal siding for logs

Flaws

High thermal conductivity

In hot weather, the lining produced by it heats up to such an extent that if you touch it carelessly, you can get burned, and the temperature inside the room increases significantly. And to protect yourself from the cold, the walls must be insulated. Quite a lot of weight

This implies the need to strengthen the foundation and load-bearing walls. Instability to mechanical damage. The resulting scratches and dents cannot be repaired and require replacement of the entire element.

Metal siding for logs with Printech coating

To some extent, the disadvantages include the price. The cladding option under consideration is not the cheapest.

Metal siding under Metalprofile Lbrus® timber

Specifications

Installation instructions

The house is sheathed according to the following scheme (more detailed instructions here):

• Installation of the starting bar. It must be located strictly horizontally at the lowest point of the facade (or the junction of the facade and the plinth).
• Installation of corner profiles. External and internal corners of the facade, window or door openings are designed.
• Installation of H-profiles for longitudinal joining of panels.
• The first panel is snapped into the lock of the starting strip, installed in the grooves of the corner or H-profile and fixed with self-tapping screws to the sheathing.
• Subsequent panels are installed in the same way.
• The canvas is completed by installing a finishing strip, which is a decorative element and protects the canvas from rainwater getting under the skin.

A metal (iron) block house gives the house the appearance of a wooden log house, but does not have the disadvantages typical of wood. The strength, resistance to external influences, and durability of the material make it a serious competitor to other types of cladding. The ability to install it yourself helps to save money and nerves; the ease of installation does not require any preliminary preparation. A metal block house is a high-quality durable material with high decorative and performance properties.

Metal siding imitation timber Metal profile Ship board

Specifications

In the catalog you can choose timber siding for the exterior of your home at a competitive price per m2. By ordering from us, you receive:

• Large selection of materials;
• Free estimate;
• Qualified consultation from specialists;
• Guarantee for all work;
• Volume discounts;
• Fast delivery throughout Moscow and the Moscow region at any convenient time.

Preparing the façade for installation

Installation of façade panels to imitate logs requires certain preparatory measures. All manipulations will be simplified as much as possible if the surface of the facade was initially flat.

The metal siding panel can have the following dimensions

The verticality of the walls is determined using a building level - if a difference of more than 2 cm per 10 linear meters is not detected, then the sheathing need not be done.

To install metal siding you will need the following tools:

• hacksaw for metal;
• screwdriver;
• a circular saw;
• level;
• chalk;
• long ruler;
• metal scissors.

If an inspection of the facade reveals significant deviations of the wall from the vertical and other defects, such as depressions, bulges and cracks, it is necessary to install the sheathing.

It will allow you to install metal siding in compliance with all standards and instructions, allow you to install the panels evenly and ensure good ventilation of the facade. The sheathing is made of wood or metal.

Metal profiles are mounted in increments of 40 to 100 cm. The optimal spacing is selected based on the building design, the width of the insulation, as well as future operating conditions.

The metal profile is mounted in increments of 40 to 100 centimeters

Taking into account the structure of the building implies that near windows, doors and structures that are supposed to be installed on the facade, the pitch of the sheathing should decrease. Also, the pitch must correspond to the width of the insulation.

Finally, locating the building in a windy region means reducing the sheathing spacing so that the siding fits more tightly.

Such a wide gap for choosing a step is an advantage of wood-look metal panels. For comparison, sheathing for vinyl panels can be installed in increments of no more than 60 cm. Additional sheathing elements must be installed around the perimeter of windows and doors.

Next, you should insulate the metal siding - installation involves laying insulation boards between the sheathing elements

When choosing a heat-insulating material, you should pay attention to the moisture absorption coefficient - it should be as small as possible

General diagram of the installation of metal siding facades

To prevent the insulation from slipping, it is secured on top with an additional strip. In addition, each individual piece of material must be secured using disc dowels.

Now it's time to install the accessories that come with the siding. Additional elements are installed under the eaves, at the bottom of the walls, in the corners of the house, as well as along the perimeter of the openings. Elements such as finishing strips are installed after the main panels are installed, when you approach the top of the building walls.

All accessories are attached to the sheathing using self-tapping screws. The fastening step is 20-40 cm. The choice of a specific fastening step is made according to the same principle as the lathing pitch was selected.

After completing the preparatory work, you should inspect everything for any deficiencies - it’s easier to eliminate them at this stage, otherwise you may then need to dismantle individual siding panels.