Features of hammerite paint and advantages of its use

Is it possible to thin 646 paint with solvent?

We strongly do not recommend diluting car enamels with solvent 646. ... If the p-650 solvent is of high quality, then it can be used to dilute nitro, melamine-alkyd, as well as acrylic primers, varnishes and paints.

Interesting materials:

What does the name Denis mean for a child? What does the name Dmitry character mean? What does the name Dmitry mean on Wikipedia? What does the name Edward mean? What does the name Ekaterina mean in short? What does the name Eleanor mean? What does the name Eleonora mean? What does the name Elmira mean in Tatar? What does the name Elsa mean? What does the name Emil mean for a boy?

What is hammer enamel?

Hammer paint is a special type of finishing coating for metal products that has a specific texture, as if it had been hit with a hammer. ... In this article we will study the main features of hammer paint and the rules for its use.

Interesting materials:

What is the difference between a simple sandwich and a complex one? What is the difference between a pond frog and a lake frog? What is the difference between wheat groats and Poltava groats? What is the difference between wheat and bulgur? What is the difference between a psycho and a psychopath? What is the difference between Pulkovo 1 and 2? What is the difference between PVC and EVA? What is the difference between QHD and Full HD? How is Light Novel different? What is the difference between a current account and a correspondent account?

Kinds

Hammerite paint comes in several forms.

With hammer effect

A coating designed for processing ferrous metals. When dried, an imitation of hammer chasing is formed on the surface of the product. This was achieved by adding aluminum flakes to the composition. The product perfectly hides unevenness in the metal; when touching up areas, the transition is almost invisible. Suitable for application to rust without pre-cleaning. Also, during the production of paint, wax is added to the composition, which additionally protects surfaces treated with this composition from moisture. This product is heat resistant, withstanding temperatures up to 80 degrees. Suitable for painting fences, gates, and various garden tools. The cost of the product is about 2,500 rubles per 2.5 liters.

Smooth glossy base for tinting

This coating is suitable for indoor and outdoor use. In addition to wax, the composition also includes silicones, which provide additional protection against corrosion. A large assortment of colors makes it possible to create the desired shade of paint. The paint gives the surface a glossy shine. The cost of the product is about 850 rubles per 0.7 liter.

Smooth glossy

The product already contains a color pigment. Suitable for both previously painted surfaces and rusty, unpainted ones. It has high resistance to such natural factors as negative temperatures, rain, snow. Does not fade when exposed to ultraviolet rays. Has a wide selection of shades. Here you will find 17 color options: from white to black. The cost of the product is about 2,000 rubles for 2.5 liters.

Smooth semi-matte

Unlike the previous product, the layer that the paint forms is matte. In addition, the paint has fire-resistant properties. It can be used to cover heating radiators and hot water pipes. The product is available in white and black. The cost of the product is about 2,200 rubles for 2.5 liters.

What color is Hammer Paint?

Hammer paint colors

• bronze
• blue
• graffite
• emerald
• brown
• copper
• mother-of-pearl
• gray

Interesting materials:

Is it possible to trim the leaves of cyclamen? Is it possible to prune the vine in summer? Is it possible to trim the top of a spruce tree? Is it possible to trim the crown of a Croton? Is it possible to trim the crown of Thuja Smaragd? Is it possible to prune mimosa? Is it possible to prune juniper in August? Is it possible to prune daffodils immediately after flowering? Is it possible to trim thread curtains? Is it possible to trim the lower branches of a Christmas tree?

Calculation of paint consumption

Hammerite hammer paint consumption per 1 m2 is 100 milliliters; in general, each type of paint has its own consumption. As you can see, the hammer type has low consumption. It is convenient to apply. And the resulting effect will be pleasing to the eye. To buy the required quantity, you need to accurately calculate the area of ​​the surface to be painted.

Hamerite paint differs from many other types; it simplifies the process of processing metal products with rust and saves time. The quality is time-tested, it will reliably protect surfaces from moisture and other factors.

SENTA HAMMER includes rust neutralizer, primer and final coat in one can. A distinctive feature of SENTA HAMMER Paint is the content of epoxy synthetic resin in its composition, which provides a dense consistency even at the first application. Epoxy resin and anti-corrosion pigment help block rust and protect the metal from corrosion for a long time. SENTA HAMMER paint does not lose its properties when mixing different colors from the catalog, and can also be mixed with SentaMiofe paint to obtain the color you need.

FEATURES of SENTA HAMMER hammer paint

Anti-corrosion paint SENTA has a high covering ability, adheres well to the surface, forming an elastic film that is resistant to salt water and humidity. SENTA HAMMER hammer paint does not contain lead!

APPLICATION AREA of hammer paint

Applies directly to all types of ferrous metal, electroplating and aluminum. Due to its harmlessness and large color palette, it is used not only in industry, but also in everyday life: for painting metal surfaces; for painting metals in construction; for painting roofs; for painting metal garden furniture; for painting garages; for painting metal entrance doors; for painting metal fences; for painting water pipes; for painting factory machines.

Hammer paint SENTA HAMMER, like its analogue SentaMiofe, is very widely used in artistic forging and for painting all types of forged products.

SURFACE PREPARATION

The metal surface must be cleaned of rust and old paint mechanically: with a brush, rasp or sand. Dust, grease, grease are cleaned with a solvent. If the surface is uneven, you can pre-treat it with sandpaper or an angle grinder (grinder), apply primer paint (optional) or fill it with putty and let it dry.

PAINT PREPARATION AND APPLICATION

You must first mix the paint and solvent very thoroughly! When using a brush, it is recommended to add 20% solvent 646. When using a spray gun, it is recommended to add 25-35% solvent. To create a reliable protective coating, apply paint 80 microns thick (one layer of paint applied from a spray gun is approximately 40 microns).

DRYING: touch-free - 15.20 minutes (depending on weather conditions). The interval between applying layers is at least two hours! The “hammer paint” effect is fully formed in 48 hours at a temperature of +20°C and air humidity of 65%.

IN CASE OF CONTACT WITH EYES, RINSE UNDER FLOW WATER AND CONSULT A DOCTOR IMMEDIATELY!

COLOR PALETTE: hammer - 48, glossy - 5; TEXTURE: hammer effect, glossy effect, metallic shade of color; SOLVENT: domestic analogue - 646; CONSUMPTION: 12-14 sq.m/l in one layer; PACKAGING: 0.75 l, 15 l; STORAGE LIFE: 5 years (at room temperature in original packaging).

The color in the table may not completely match the standard, since the perception of color on the monitor screen depends on the brightness, contrast and color settings of the monitor.

Konstantin Lapin post pinned

Good day, can you tell me what is the best way to dilute Hammerite paint, other than the original solvent and cleaner?

Xylene or solvent. It’s better to read what’s written on the can than to dilute it.

Konstantin, if I'm not mistaken, you can use 647 solvent. Try solvent or white spirit.

You can do anything, the question is how this will affect the properties and further quality of the paint. You need to know what the paint and solvent are made from.

Konstantin, are you going to prime? And I’m also interested in your paint with a hammer effect?

Pasha, yes, hammer with dual tesh protection. As I understand it, it doesn’t need to be primed. Before painting, I want to paint over the welds, joints, covers on the posts, and the grille. The manufacturer strongly recommends diluting them only with a solvent, explaining this by the special composition of the paint, but their solvent is difficult to find plus the price (((. As I understand it, in principle, it can be diluted with anything, but I would like to know what is better, so that there are no undesirable consequences later.

Composition and properties of paint

Hamerite has the property of drying quickly; before painting there is no need to mechanically prepare the surface of the product. The material includes:

• Modified alkyd resin;
• Kohler, to obtain the desired color;
• Anti-corrosion elements;
• Thinner and technical wax;
• Fillers and other additives.

The presence of these elements in the composition helps to obtain a number of positive characteristics. These include:

Creates a reliable protective layer against the effects of rust, capable of protecting treated objects on the street and in the building; Hamerait's color range is varied, there are also more non-standard options, such as hammer, cherry, silver, etc.; The optimal level of adhesion is suitable for surfaces with rust and metal, which allows you to obtain a durable coating; The paint product can withstand various temperatures, both very low and incredibly high; according to the manufacturer’s application, it can withstand even +150 degrees; All types of Hammerite can withstand exposure to sunlight for five years.

It doesn’t matter whether they were applied to a metal or wooden surface; Protects wooden objects located outside from environmental influences; in this case, it is advisable to initially clean the surface and cover it with acrylic primer; It is possible to coat plastic pipes to obtain an excellent protective coating. Creates a reliable protective layer against the effects of rust, capable of protecting treated objects outdoors and in the building.

Creates a reliable protective layer against the effects of rust, capable of protecting treated objects outdoors and in the building.

Recommendations for performing work

The substance can be diluted with nitro 646 or 645 solvent. The solvent itself cannot affect the quality of the coating or gloss. Before starting work, the mass should be thoroughly stirred so that the composition is as uniform in concentration as possible.

Apply dye using cans, roller, brush or pneumatic sprayer

It is important not to make the paint layer too thick; normally its thickness is about one hundred microns. This density is optimal for reliable protection of metal and wood products

Before starting work, it is recommended to shake the can vigorously. The consumption of the substance in the can is not visible, so you should apply one layer and wait about twenty minutes until it dries

The can becomes noticeably lighter when the amount of substance in it decreases, it is worth paying attention to this during operation

When the surface treatment area is large, a special device is used - a spray gun. Its use requires that the substance have a certain thickness. For dilution, a solvent is used, adding it in a ratio of 2: 1. This combination is appropriate at a temperature of about twenty degrees Celsius, but if the temperature is lower, then the proportions are adjusted. To treat various machine parts, protecting them from rust, the paint is diluted with a solvent in a ratio of 9: 1.

It is better to hold the spray gun at an angle of 90 degrees relative to the surface being treated. We must not forget about personal protection. You should definitely use:

• glasses;
• gloves;
• good respirator.

In addition, you should take advantage of a few more tips from experienced professionals.

• It is recommended not to dip the roller in paint, but to pour the substance onto it in small portions, and only then roll it out.
• It is not recommended to use foam rubber coatings for rollers, otherwise the paint will simply destroy the foam rubber.
• The second layer can be applied only after the first has dried.
• It is advisable to apply layers with a brush only on those surfaces that have a complex configuration. If you apply the dye with a brush to smooth surfaces, gaps will inevitably remain.

More substance should be used in areas of joints and welding, since these nodes are the most vulnerable. It is better to paint all intended areas in one cycle to avoid the appearance of unwanted stripes. During work, you should not rush too much; it is important to carefully treat each, even small, area. It is also important not to use too much substance so that there are no large layers.

Features of paint application

The first step is to choose the tool that will be used for painting. Traditionally, a brush, roller, spray gun, or spray cans are used. When choosing, you need to focus on the type of surface; if the surface is flat, then a roller and a spray gun will do; if it has a lot of complex transitions, then use a brush. Spray cans are used to paint small objects.

The first step is to choose the tool that will be used for painting.

Brush

A brush should be chosen with natural bristles; application to the surface is carried out in 2-3 layers; especially careful treatment is necessary for curly elements and corners. In this case, the thickness of one layer should not be more than 100 microns.

A brush should be chosen with natural bristles; application to the surface is carried out in 2-3 layers.

Roller

A roller is best suited with short pile made of wool or fur. Working with a roller allows you to quickly paint smooth surfaces; parts with corners and irregularities are best handled with a brush. The first layer should be applied using the same brand of paint solvent.

A roller is best suited with short pile made of wool or fur.

Spray gun

When choosing a spray gun, you need to have the skills to apply coloring compounds using it. The paint is diluted until the desired viscosity is obtained, the surface should be smooth and clean.

Hammerite metal paint in the instructions describes the proportion of adding Brush Cleaner & Thinners solvent, it is equal to 2/1. Dilution will allow you to obtain the required viscosity.

When choosing a spray gun, you need to have the skills to apply coloring compounds using it.

Aerosol

Before spraying, shake the aerosol thoroughly, apply from a distance of 15-20 centimeters, you need to make 3-4 layers, moving from the thinnest to the densest. The 2nd layer can be applied after 2-3 minutes, 3 and 4 after 15-20.

Before spraying, shake the aerosol thoroughly and apply from a distance of 15-20 centimeters.

Advantages and disadvantages

All coloring products of this brand have a number of undeniable advantages:

creates a reliable water- and dirt-repellent layer; prevents the development of corrosion processes; all processes associated with surface cleaning and painting do not require special preparation, so the consumer can perform them independently, thus saving money on the services of professionals; the ability to use tools available to most people for painting; minimum expenditure of time and effort during preparation and painting, including rust; fast drying, which significantly saves time - each subsequent layer can be applied within three hours after the previous one

In addition, three hours after applying the last layer, the painted object is allowed to be used; does not have an unpleasant odor or toxic effect on the human body, which is very important when performing interior painting work; the colors and textures are so varied that they will satisfy the whims of even the most capricious buyer. The disadvantages include the impossibility of applying Hameraite paint on surfaces that were previously painted with bitumen-based products

In addition, this product cannot be mixed with other types of paints.

The disadvantages include the impossibility of applying Hamerite paint on surfaces that were previously painted with bitumen-based products. In addition, this product cannot be mixed with other types of paints.

Negative aspects associated with violating manufacturer's recommendations

Sometimes consumers complain about low-quality products, without taking into account that all the positive aspects of hammerite paint appear only when it is used correctly. The most common problems include:

1. After applying the product to the rust spots, they soon appeared again. Possible reasons:

• poor quality cleaning and drying (in case of pre-washing) of the product;
• poorly or not cleaned edges of the product, as well as its hard-to-reach areas. The rust remaining in these places very quickly reminds itself;
• saving paint. The manufacturer recommends two-layer application. Therefore, even if it seems that one coat is enough and the surface looks perfect, a second coat should be applied. Having saved a small fraction, you will then have to spend a lot on repeated cleaning, processing and preparation, as well as on the purchase of additional paint and varnish material and painting.

The painted metal surface has become wrinkled and uneven. Most likely, this happened due to haste, as a result of which the interval for drying the previous layer was not maintained. Small delaminations form on the surface treated with hammer paint.

This situation is associated with the poor adhesive properties of the painted material - aluminum, galvanized steel and other non-ferrous metals are very smooth and require priming before the painting process. Therefore, it is very important to initially pay attention to the material from which the product is made.

Hammer paint

Thinning paint

Before work, check the viscosity of the composition. If it is insufficient, then add a solvent. Before diluting Hamerite enamel for rust, mix the paint itself, the air temperature should be from +5 to +30 degrees. Add the required amount of thinner and mix the components thoroughly until a homogeneous mass is obtained.

Tools for painting car bodies and other structures

To paint the vehicle body or other structures and parts, you can use various special tools available. Smooth Hammerite enamel lays flat on the surface to be treated if you use the following tools:

If the surface to be treated is large enough and has no defects, then it is best to use a spray gun when painting it. This method of applying paint significantly saves work process time, consumable paint and varnish material, and results in a thin, even layer of coating.

When painting car bodies and other large surfaces, this is the most cost-effective and convenient method that ensures high quality paint. Painting with a spray gun is not recommended if small parts are being processed, since some of the paintwork will fall outside their boundaries and will be wasted.

To paint structures with complex configurations, you should also not use a sprayer, since in addition to losses of paint and varnish material, smudges and unevenness may appear in places of bends. In these cases, it is better to use a brush or, if the surface is flat, a roller.

When a customer recently asked, pointing during measurements to a neighbor’s metal fence with a hammer effect: can you tell me if you will use the same paint with me, with a nice pearlescent tint? It was most likely not some purely domestic “Nerzhamed” or Yaroslavl “Spetsnaz”, but a product of the AkzoNobel concern, well known in Kirov to manufacturers of laminated veneer lumber, for example. It also supplies the widely advertised Hammerite to Russia.

What is Hamerite paint?

Primer enamel for rust 3 in 1 Hammerite are produced for household use; they can be applied to metal and wooden surfaces, as well as to some types of plastic products, including plastic pipes.

Many people appreciate the fact that painting does not require a large number of preparatory steps. Before painting the surface, it is cleaned, and then a Hammerite coating is applied, which includes three products at once, including a primer and a rust converter.

Painting does not require a large number of preparatory steps.