Features of hammerite paint and advantages of its use

We provide computer tinting of Hammerite paint in all colors.

Prices start from 10 rubles/liter and can reach 600 rubles/liter.

The cost of tinting depends on the color saturation, composition and number of colors poured. The most expensive pigments include yellow and red, respectively, all colors obtained mainly from these pigments (and these are yellow, red, orange and their shades) will be expensive.

We tint according to color catalogs of paintwork materials from the most famous manufacturers: Tikkurila, Dulux, Marshall, Symphony, Teknos, Beckers, Finncolor, RAL, Caparol, Alpina, Ceresit, Pufas, Dufa, Dali, Tex, Parade, Lakra and others. In addition, you can purchase coatings from these manufacturers (and we work with them directly) at the lowest prices. We constantly have promotions and sales on them.

We do not tint: Metallic (except Ral 9006 and 9007), Two-component, epoxy and polyurethane paints, Pearlescent and fluorescent RALs

Primer enamel for metal and rust Hammerite is available in smooth, semi-matte and hammer textures.

The color range of the smooth texture of Hamerite paint includes the following colors: black, white, white night, dark blue, blue, dark brown, magnolia, green, red, silver, yellow, gold.

The color palette of Hammerite semi-matte paint includes the following colors: black, white, blue, lavender, dark brown, gray and dark grey.

The Hammerite paint color chart includes the following colors: black, dark blue, light blue, brown, copper, dark green, lime green, red, gray and silver gray.

For clarity, we decided to invite you to see what this or that Hammerite metal paint structure looks like in photographs of real-life objects: smooth, hammer-like, semi-matte.

The color palette itself can be viewed here.

You can buy anti-rust metal paint here.

Kinds

Hammerite paint comes in several forms.

With hammer effect

A coating designed for processing ferrous metals. When dried, an imitation of hammer chasing is formed on the surface of the product. This was achieved by adding aluminum flakes to the composition. The product perfectly hides unevenness in the metal; when touching up areas, the transition is almost invisible. Suitable for application to rust without pre-cleaning. Also, during the production of paint, wax is added to the composition, which additionally protects surfaces treated with this composition from moisture. This product is heat resistant, withstanding temperatures up to 80 degrees. Suitable for painting fences, gates, and various garden tools. The cost of the product is about 2,500 rubles per 2.5 liters.

Smooth glossy base for tinting

This coating is suitable for indoor and outdoor use. In addition to wax, the composition also includes silicones, which provide additional protection against corrosion. A large assortment of colors makes it possible to create the desired shade of paint. The paint gives the surface a glossy shine. The cost of the product is about 850 rubles per 0.7 liter.

Smooth glossy

The product already contains a color pigment. Suitable for both previously painted surfaces and rusty, unpainted ones. It has high resistance to such natural factors as negative temperatures, rain, snow. Does not fade when exposed to ultraviolet rays. Has a wide selection of shades. Here you will find 17 color options: from white to black. The cost of the product is about 2,000 rubles for 2.5 liters.

Smooth semi-matte

Unlike the previous product, the layer that the paint forms is matte. In addition, the paint has fire-resistant properties. It can be used to cover heating radiators and hot water pipes. The product is available in white and black. The cost of the product is about 2,200 rubles for 2.5 liters.

Basic colors

At your request, tinting is possible in any color according to the RAL catalog.

Advantages and disadvantages

All coloring products of this brand have a number of undeniable advantages:

creates a reliable water- and dirt-repellent layer; prevents the development of corrosion processes; all processes associated with surface cleaning and painting do not require special preparation, so the consumer can perform them independently, thus saving money on the services of professionals; the ability to use tools available to most people for painting; minimum expenditure of time and effort during preparation and painting, including rust; fast drying, which significantly saves time - each subsequent layer can be applied within three hours after the previous one

In addition, three hours after applying the last layer, the painted object is allowed to be used; does not have an unpleasant odor or toxic effect on the human body, which is very important when performing interior painting work; the colors and textures are so varied that they will satisfy the whims of even the most capricious buyer. The disadvantages include the impossibility of applying Hameraite paint on surfaces that were previously painted with bitumen-based products

In addition, this product cannot be mixed with other types of paints.

The disadvantages include the impossibility of applying Hamerite paint on surfaces that were previously painted with bitumen-based products. In addition, this product cannot be mixed with other types of paints.

Negative aspects associated with violating manufacturer's recommendations

Sometimes consumers complain about low-quality products, without taking into account that all the positive aspects of hammerite paint appear only when it is used correctly. The most common problems include:

1. After applying the product to the rust spots, they soon appeared again. Possible reasons:

• poor quality cleaning and drying (in case of pre-washing) of the product;
• poorly or not cleaned edges of the product, as well as its hard-to-reach areas. The rust remaining in these places very quickly reminds itself;
• saving paint. The manufacturer recommends two-layer application. Therefore, even if it seems that one coat is enough and the surface looks perfect, a second coat should be applied. Having saved a small fraction, you will then have to spend a lot on repeated cleaning, processing and preparation, as well as on the purchase of additional paint and varnish material and painting.

The painted metal surface has become wrinkled and uneven. Most likely, this happened due to haste, as a result of which the interval for drying the previous layer was not maintained. Small delaminations form on the surface treated with hammer paint.

This situation is associated with the poor adhesive properties of the painted material - aluminum, galvanized steel and other non-ferrous metals are very smooth and require priming before the painting process. Therefore, it is very important to initially pay attention to the material from which the product is made.

Hammer paint

Ammerheim Certificates

Ammerheim quick-drying solvent-soluble anti-corrosion materials are certified according to the system of the Customs Union of the Republic of Belarus, the Republic of Kazakhstan and the Russian Federation Eurasian Economic Community. Certificate No. BY.20.22.01.008.E.000376.07.15 dated July 23, 2015. Ammerheim quick-drying solvent-soluble anti-corrosion materials meet the requirements of state sanitary and epidemiological rules and regulations. Sanitary and epidemiological conclusion No. 595 dated May 29, 2015. Approved in the “Unified Industry Nomenclature Catalog of Equipment and Materials for Nuclear Power Plants” (EONKOM) and included in the Corporate Classifier Directory used in the automated system for filing purchase applications of OJSC NK Rosneft based on SAP. The manufacturer guarantees that, subject to the recommendations for use, rules of transportation, storage, application and operating conditions, the service life of the coating obtained on the basis of Ammerheim quick-drying solvent-soluble anti-corrosion materials will be at least 10-15 years.

Hammerite hammer paint for metal surfaces, alkyd

A rather unusual paint, which appeared in the early 60s of the last century, immediately brought Hammerite worldwide fame. Hammerite hammer paint is different

not only with high protective properties, but also with an exclusive appearance of the coating, reminiscent of hammering.

This effect is obtained due to the presence of aluminum flake additives in the composition, which, after evaporation of the solvent and polymerization of the base, are firmly bound by synthetic additives and provide the characteristic appearance of the surface. Hammerite hammer enamel

also contains active anti-corrosion additives (zinc phosphate), corrosion converters and natural wax.

The complex effect of chemical and organic additives leads to the formation of a strong but elastic film that protects the metal from all types of external influences for at least 8 years. Hammerite paint

can be applied to new or previously painted surfaces, including those bearing traces of rust. Inhibitors transform the corrosion layer into a tightly bound metallic compound, which is not inferior in mechanical properties to the base.

Hammerite with hammer effect

Contains silicone additives that increase water resistance and resistance to dirt adhesion. The presence of special additives ensures the coating’s resistance to oils, gasoline and organic solvents. Adhesion enhancers allow the composition to be applied to any type of substrate. Hammerite paint

does not cause problems when painting surfaces:

· painted with alkyd, acrylic and urethane paints.

The only limitation is Hammerite hammer

does not tolerate contact with bituminous materials (paints and roofing coatings).

Buy Hammerite hammer paint

The online store KRASKI.RU offers wholesale and retail with delivery in Moscow. The paint is packaged in metal cans with a capacity of 0.25, 0.75, 2.5 and 5 liters. You can choose the required amount of paint both for finishing small forging elements or decorative parts, and for protecting large surfaces inside or outside buildings.

Anti-corrosion paint Hammerite hammer

Available in more than ten standard colors. The most popular Hammerite hammers are brown and black.

, it is in this color scheme that the specific effect is most clearly manifested. But the choice of color depends on the characteristics of the surface and design requirements for design. The paint should be in harmony with the rest of the elements - the aesthetics of the surface should not be ignored based only on the requirements for the level of anti-corrosion protection.

Hammerite hammer paint brown

Excellent for structural details in which metal is combined with wood, for example, in fences, gates or elements of garden structures. The color of the paint is well preserved throughout its entire service life, the surface is easily washed and cleaned without the use of chemicals - simple water can remove all dust and dirt without a trace.

Hammerite gray hammer paint, which is now fashionable, also has high decorative properties.

. A common concern is that rust or traces of old paint

will show through a layer of gray paint. When using Hammerite, such fears are unfounded - the coating film is characterized by high density and color depth, even on light colors stains or base defects do not appear.

Thixotropy of paint

allows it to spread evenly and form an even layer, and the hammer surface perfectly masks any defects in the processing of the base. Even if a part that was previously painted with Hammerite is damaged, only part of the paint in the repair area can be renewed - the new and old painted areas do not differ at all in appearance.

Disadvantages of Hammerite Paint

The composition of the paint does not allow it to be applied to surfaces previously painted with bitumen-based paints. If you are in doubt about what type of paint the surface was previously painted with, apply some Hammerite paint to the item. After an hour, look at the effect and decide what to do. The applied test layer of Hamerite coating should not cause swelling, cracking or other negative consequences. If this is observed, then the previous layer of paint will have to be removed and only then begin work.

Hammerite anti-corrosion paint is designed for heating radiators and other difficult surfaces

Hammerite paint is available not only in cans, but also in spray cans

By violating them, including working on rust, the consumer does not get the expected effect and begins to think that he has purchased the wrong thing. Here are some negative results:

If you apply Hamerite to rust, it will appear again after a short time. This means that you could have made several mistakes: poor cleaning and drying (if the product has been washed); unpolished edges or other areas of the product that are invisible at first glance and hard to reach. It doesn't take long for the remaining rust to show itself and undermine Hammerite's credibility; savings when applying composition of any color, especially hammer glossy texture. This is the case when you applied one coat and you thought everything looked great. You need to understand that this is not savings, but additional costs for re-processing the surface, preparing it for painting and additional painting. You were not careful - the manufacturer recommends applying at least 2 layers of Hammerite coating.

The applied composition on the painted metal became uneven and wrinkled. This is the result of your haste - the time for drying the previous layer was not met. Now you need to let the applied composition dry, remove it by stripping and paint again. Hammerite paint - 8 years manufacturer's warranty

Small flaking particles have started to form on the Hammerite hammer paint applied.

In this case, pay attention to what the product you painted is made of. It is possible that adequate adhesion (stickability) of the composition to its surface is not ensured

Non-ferrous metals, such as galvanized steel and aluminum, have a very smooth surface. They require that the surface be treated with a recommended primer before applying the base coat.

These examples show that, without violating the requirements for its application, Hammerite coating will meet the highest quality standards. Specially made for home use, with a wide range of colors to choose from, it will bring you true satisfaction.

Recommendations for applying paint

The manufacturer of the paint and varnish material indicates that Hammerite can be applied directly to rusty metal surfaces without careful processing and the use of primer. But if the product contains many deep pockets of corrosion, it is worth using a grinder and sandpaper and preparing the surface according to all the rules, using alkyd primer.

Follow these recommendations:

• To paint metal surfaces with pockets of corrosion, use smooth Hammerite enamel without prior preparation.
• Heavily rusted metal products are pre-cleaned mechanically (grinder, sandpaper), the edges are thoroughly cleaned, and treated with a primer.
• When processing a previously unpainted steel surface, pre-painting steps are minimal - cleaning, washing, drying, paintwork is applied without an underlayer or primer.
• Application of Hammerite paint to a painted product requires testing. A small area is painted, and after drying the result is assessed. If the coating does not peel off, you can paint it.
• It is recommended to apply the paint in 2-3 layers at a room temperature of +5 to +25°C. When applying with a brush, no dilution is required; when applying with a roller, the ratio of solvent to paint is 1:10, and with a spray – 1:7.

The layer is applied evenly, carefully painting hard-to-reach and shaped areas, taking into account the consumption per square meter. After twenty to thirty minutes, the painting is repeated, if necessary, three layers of paint are applied.

Hamerite paint has a scaly structure, bright colors, and a hammer effect, so it effectively hides minor surface defects. The underlayer, anti-corrosion primer and topcoat reliably protect rusted metal structures from damage and destruction.

On video: instructions for applying hammerite paint.

Related article: How and with what to dilute paint for painting a car?

Fire indicators

These fire ratings are the best among solvent-based paints for metal.

According to the degree of toxicity, Ammerheim quick-drying organic-soluble anti-corrosion materials belong to hazard class IV - low-hazard substances according to GOST 12.1.007-76, chemically stable, compatible with other substances. Does not pose a risk to the respiratory system. The formed coating does not have a harmful effect on the human body.

Recommendations for performing work

The substance can be diluted with nitro 646 or 645 solvent. The solvent itself cannot affect the quality of the coating or gloss. Before starting work, the mass should be thoroughly stirred so that the composition is as uniform in concentration as possible.

Apply dye using cans, roller, brush or pneumatic sprayer

It is important not to make the paint layer too thick; normally its thickness is about one hundred microns. This density is optimal for reliable protection of metal and wood products

Before starting work, it is recommended to shake the can vigorously. The consumption of the substance in the can is not visible, so you should apply one layer and wait about twenty minutes until it dries

The can becomes noticeably lighter when the amount of substance in it decreases, it is worth paying attention to this during operation

When the surface treatment area is large, a special device is used - a spray gun. Its use requires that the substance have a certain thickness. For dilution, a solvent is used, adding it in a ratio of 2: 1. This combination is appropriate at a temperature of about twenty degrees Celsius, but if the temperature is lower, then the proportions are adjusted. To treat various machine parts, protecting them from rust, the paint is diluted with a solvent in a ratio of 9: 1.

It is better to hold the spray gun at an angle of 90 degrees relative to the surface being treated. We must not forget about personal protection. You should definitely use:

• glasses;
• gloves;
• good respirator.

In addition, you should take advantage of a few more tips from experienced professionals.

• It is recommended not to dip the roller in paint, but to pour the substance onto it in small portions, and only then roll it out.
• It is not recommended to use foam rubber coatings for rollers, otherwise the paint will simply destroy the foam rubber.
• The second layer can be applied only after the first has dried.
• It is advisable to apply layers with a brush only on those surfaces that have a complex configuration. If you apply the dye with a brush to smooth surfaces, gaps will inevitably remain.

More substance should be used in areas of joints and welding, since these nodes are the most vulnerable. It is better to paint all intended areas in one cycle to avoid the appearance of unwanted stripes. During work, you should not rush too much; it is important to carefully treat each, even small, area. It is also important not to use too much substance so that there are no large layers.

Composition and properties of paint

Hamerite has the property of drying quickly; before painting there is no need to mechanically prepare the surface of the product. The material includes:

• Modified alkyd resin;
• Kohler, to obtain the desired color;
• Anti-corrosion elements;
• Thinner and technical wax;
• Fillers and other additives.

The presence of these elements in the composition helps to obtain a number of positive characteristics. These include:

Creates a reliable protective layer against the effects of rust, capable of protecting treated objects on the street and in the building; Hamerait's color range is varied, there are also more non-standard options, such as hammer, cherry, silver, etc.; The optimal level of adhesion is suitable for surfaces with rust and metal, which allows you to obtain a durable coating; The paint product can withstand various temperatures, both very low and incredibly high; according to the manufacturer’s application, it can withstand even +150 degrees; All types of Hammerite can withstand exposure to sunlight for five years.

It doesn’t matter whether they were applied to a metal or wooden surface; Protects wooden objects located outside from environmental influences; in this case, it is advisable to initially clean the surface and cover it with acrylic primer; It is possible to coat plastic pipes to obtain an excellent protective coating. Creates a reliable protective layer against the effects of rust, capable of protecting treated objects outdoors and in the building.

Creates a reliable protective layer against the effects of rust, capable of protecting treated objects outdoors and in the building.

Color palette

A wide selection of palettes is another positive aspect of the paints from this manufacturer. There are podcasts for each type of enamels.

Glossy textures are available in cherry, red, brick red, light grey, light brown, grey, gold, blue and white. You can also choose the color of leaf green, magnolia, dark blue, just blue and yellow.

Hammerite colors of matte enamels: white, black.

Hammer enamel: dark blue, dark green, silver, gray, blue, gold, brown, red, light green, black, and also a shade of copper. At the same time, the manufacturer replenishes each line of the color palette with enviable regularity.

A wide selection of palettes is another positive aspect of the paints from this manufacturer.