How to wallpaper an arch - a step-by-step description of the work process

Icer
10635 0 0

Icer March 13, 2017 Specialization: master in the construction of plasterboard structures, finishing work and laying floor coverings. Installation of door and window units, finishing of facades, installation of electrical, plumbing and heating - I can give detailed advice on all types of work.

When gluing wallpaper on arches, the most important thing is the accuracy of the junction of the wall and the opening.

When I glued wallpaper in a room with an arch for the first time, the result of the work was far from ideal. Careless joints, folds, peeling areas - all this worsened the appearance. But with practice comes experience, and now I can say that following the technology will allow you to achieve an excellent result, even if you have never glued wallpaper to an arch.

The technology discussed in the article is suitable for gluing arches of any shape

How to wallpaper an arch - technology and design

If your home has an arched opening or niche, they look very beautiful. But during the next cosmetic renovation, you will definitely be faced with the question of how to cover the arch with wallpaper so that it looks impressive and neat.

Arched structures give the interior a special style, which can vary depending on the finish. They can be decorated with wood, acrylic mirrors, decorative plaster and, of course, wallpaper. The last option is the simplest and most cost-effective, but at the same time one of the most common. Unlike other types of decoration, wallpaper can be changed and varied as often as you want.

Despite its apparent simplicity, wallpapering an arch must be done in compliance with certain rules so that the result of the work is pleasing to the eye. Therefore, it’s worth taking a closer look at how to glue wallpaper onto an arch.

Wallpaper selection

It would seem that the question of choosing wallpaper for an arch should not arise at all: what difference does it make what the pattern, color, texture will be? However, it should be remembered that joining curved boundaries together is already quite difficult, and if you need to combine a pattern, the task becomes even more complicated.

The shape of the arch is such that it is impossible to match the pattern on its front and side sides. Therefore, if you want to decorate the entire arch with the same wallpaper, choose canvases without a pattern (plain color), or with an abstract or small pattern that does not require matching.

It will be easier to choose wallpaper for an arch if its inner surface is covered with completely different color-compatible wallpaper or painted. In this case, the pattern on the main wall can be anything, but inside the arch it is better to make it a single color.

Nowadays on sale you can often find companion wallpapers with a common background and different patterns. They are ideal for finishing arched openings.

If you use patterned wallpaper to cover an external wall, then the arch opening itself can be finished with plain or striped wallpaper.

A few words should be said about the quality of the wallpaper chosen. If you have an arch-shaped opening between rooms, then this area will experience quite a large load. The walls of the arch must be cleanable and resistant to mechanical stress. This means that paper wallpaper is not suitable here. It is better to choose glass wallpaper, bamboo wallpaper, or at least thick non-woven or vinyl wallpaper that can be wiped with a damp sponge.

The requirements for arched niches in the wall are not so strict, especially if they are located at some distance from the floor.

Work order

If you start looking on the Internet for the answer to the question of how to wallpaper an arch, you will see the same instructions everywhere. It has a right to exist and is quite acceptable for familiarization with the technology of this work.

But one gets the impression that these instructions were written several decades ago, when no other types of wallpaper other than paper existed. At least in our country. Many resources even suggest gluing wallpaper using paste.

Pasting the arch facade

You will understand what we are talking about when you read these instructions. We will also briefly describe it, because in the case of smooth paper wallpaper it can well be used.

1. When starting to paste the wall in which the arched opening is located, make sure that the edge of the last canvas in front of the arch is not too close to the opening. The wider the strip of wallpaper, the easier it will be for you to work.
2. Glue the next canvas as usual, without cutting it along the arch. After gluing, use sharp scissors to cut off that part of the canvas that extends beyond the opening, but not exactly along its contour, but at a distance of 2–2.5 cm.
3. Cut this loose strip of wallpaper every 2–3 cm perpendicular to the opening line, wrap the resulting tabs inward and glue.
4. In the same way, cover the top and second side of the arched opening.

Pasting the inside of the arch

Measure the depth of the opening and the overall length of the arch from one low point to the other. Cut a strip of wallpaper of the required length, but make its width a couple of millimeters smaller. If the length of the arch is very long, make the strip a little longer and cut it in half.

• Stick the strip into the opening from bottom to top.

As you yourself understand, if you fold modern thick or textured wallpaper inside the opening, you simply won’t be able to paste another layer on it. Therefore, experienced finishers answer the question of how to wallpaper an arch like this:

• First, paint the edges of the arch with paint to match the wallpaper.
• After it has dried, paste over the facade as described in the first two paragraphs of the instructions. But do not glue the wallpaper inside the opening, but wait for the glue to dry and carefully cut off the excess with a sharp knife, pressing it against the edge of the opening.
• When cutting out a strip for interior decoration, make it a little wider than necessary. Glue, aligning the factory edge of the wallpaper with one of the edges. And after drying, also carefully cut off the excess paper.

You may be interested in: You can order a bouquet to your home at an incredibly competitive price in Poltava

What wallpaper to choose for the attic, what to pay attention to

Choosing wallpaper is always a difficult task, especially if we try to match it to non-standard rooms. In this case, we need to take into account not only the psychology of color, the characteristics of design and texture, but also the size of the images, their style and orientation. In general, the task is not the easiest, although it would seem that this is a banal choice of finishing material for the walls.

In this article we will talk about the attic, we will consider possible wallpaper options for such an original room, we will show successful examples from our point of view, where the decoration of the room is done at the highest level.

Bedroom under the roof in soft colors

Basic points

An attic is a living space located directly under the roof of a house. The main difference between this room and all the others is the non-standard shape of the ceiling, or sloping, defective walls.

This geometric feature of the attic room is its highlight; the decoration of such a room is complex, but the more interesting is the process of creating an original interior design. You can beautifully decorate any room on the attic floor - an original bedroom, a unique children's room, a cozy home office.

Modern minimalist interior

However, designers are most inclined towards bedrooms, considering this direction optimal for an attic space. These conclusions are based not only on the non-standard appearance of the attic: the rare geometry of the space, the presence of bulky building elements (beams, ceilings), the accessibility of the roof, but also on the fact that most often this room is well lit with natural light and offers an excellent view of the sky and stars.

When choosing the character of a room, it is important to understand that the finishing will only be a beautiful, final result of a long renovation journey. After all, first of all, you need to take care of the basic characteristics of the attic: it is important to make good thermal insulation, bring light into the room, solve heating issues, and only then think about what wallpaper to put in this room.

Note that for preparing the attic, a special backing for wallpaper, for example, the Polifom brand, is perfect, which will provide additional protection for the decorative coating, insulate the room and increase sound insulation.

An important criterion when choosing a wallpaper tone will be the illumination of the room. If there is limited natural light in the attic room, it is best to stick to light colors. They will add light to the room and further expand the space, which in most cases is not so large.

How to properly cover small arches in a house using regular wallpaper

When arranging a high-quality modern interior, increased attention is paid to the decoration of arches, since with their help you can interestingly beat up a long-boring classic doorway. For work, specialists use different materials, but the most budget option is wallpaper. If you approach this process as responsibly as possible and follow all the recommendations of experts, then all the necessary manipulations can be done with your own hands, while saving a decent amount of the family budget.

Choice of quality finishes

It is necessary to select wallpaper as responsibly as possible. They must be not only durable, but also able to withstand constant loads and abrasion. If you need to perform original finishing, then for these purposes it is better to choose the following types:

• Washable. They compare favorably with all analogues in their practicality. The user can remove dirt and dust without fear of damaging the coating. They are presented in a wide range of colors and patterns, so each consumer can choose the most suitable option. Decorative corners can be glued to the joints of the canvases.
• Paper. The base can be smooth, structured, embossed. They themselves are quite durable and lightweight, making them quite easy to work with.
• Double layer. Can be made from bamboo, vinyl and textiles. They have a long service life and aesthetic appeal, which is especially important for finishing classic arches. But it is necessary to use such material in an apartment with extreme caution, since all items must have a common note of the selected interior.
• Liquid wallpaper. It is convenient to work with this material, as it has all the properties of decorative plaster. There are not many common characteristics with classic wallpaper. There simply cannot be any joints or mismatched finishes.

The difficulty in choosing a suitable finish is that the materials involved must be combined with each other. For finishing, experts recommend using plain stripes. Otherwise, it will be extremely difficult for the master to match the material according to the pattern with the wall covering.

Decorating the arch

Design features

In order for the result of the work done to meet all the requirements, you need to prepare the opening in advance, as well as purchase all the necessary tools:

• Sharp scissors.
• Decorative, leveling corners.
• Roulette, square.
• High-quality adhesive composition.
• Marker or pencil.
• Paint brush with soft bristles, spatula, rag.

To improve glue adhesion and strengthen the base, all surfaces are coated with a layer of primer. If the arch is porous and loose, then it is better to perform the treatment twice. Builders use universal soil. With its help, you can not only strengthen the surface, but also paint it white, creating an ideal base for wallpaper.

It is worth noting that the adhesive must be selected in strict accordance with the type of finish involved. A thicker composition is suitable for the opening. When preparing high-quality glue, you should reduce the amount of water by 12%.

It would be a good idea to purchase a special brush for leveling the canvases. Since the surface of the arch may be uneven, using a classic spatula to press the wallpaper will be extremely inconvenient. If the technician puts in more effort than necessary, this can result in multiple damage to the coating. It is much better to use a suitable brush, which has a width of 30 cm. With its help, you can achieve the fastest and highest quality alignment of stripes, even on semicircular surfaces. You can purchase such a product in specialized construction stores.

If the outside joint of the opening and the wall is closed with corners, then it is best to buy multifunctional flexible products of different shades. For such work, a material of small thickness is suitable, which has a very small protrusion to form a contour.

Independent implementation of an interesting design idea

Arch preparation

To minimize the likelihood of wallpaper peeling off from the base and destruction of the edges of the opening, it is necessary to perform a number of basic manipulations. The modern construction market offers customers a huge range of high-quality corners that can be glued to the base and also screwed with self-tapping screws. First, the master will have to clean the structure from dust and other contaminants. The surface is thoroughly plastered. If a polyvinyl chloride corner is used, it is covered with glue and fixed.

Important! Experts say that it is not at all necessary to wait for the plaster to dry completely before attaching the plastic corner to the arch.

Metal parts can only be fixed with self-tapping screws, since they are quite heavy and ordinary glue simply will not support them. There is no need to tighten the fasteners too much. Otherwise, it is possible that waves will form, which can only be removed with a thick layer of plaster. At the final stage, the corners must be coated with a finishing compound and left to dry. You can clean the structure using sandpaper. Cover the top with drying oil.

Preparatory manipulations

Decoration nuances

The standard adhesive composition is not able to withstand the weight of a strip of wallpaper. Experts prefer to cook it themselves. To do this, take 1 part of PVA glue and twice as much wallpaper product. The composition is thoroughly mixed and applied to the strip. You need to start gluing the canvases from the window, but in such a way that the last strip does not reach the opening by at least 23 cm.

Important! It is forbidden to try to cut out an arch from wallpaper in advance, since in 99% of all cases it is impossible to guess the size.

The prepared material is glued to the wall and the outline is gradually formed using sharp scissors. All edges are fixed in the inside and coated generously with glue. The second side of the structure is decorated in a similar way, but only after pasting the surface above the door.

Decorating the arch vault

First of all, carefully cut out a strip that is optimal for the width of the arch, but 7 mm smaller than the actual size. To avoid common mistakes, you must follow a certain algorithm of actions:

• All internal sides of the structure and the prepared section are coated with glue. You should wait at least 15 minutes for the surfaces to become saturated with the product.
• The piece is fastened on one side from below and gradually glued higher along the arch. The final stage is to fall on the bottom from the opposite side.

To avoid unwanted bevel, it is worth dividing the strip into 2 parts. First of all, glue one side, and only then the other, in order to connect them as harmoniously as possible in the middle.

High quality and affordable option

Application of decorative corners

A product made of durable plastic will frame the arch as harmoniously as possible if the craftsman selects it in a contrasting shade with the color of the walls. The white tone of the corners suits absolutely any interior. Following the pasting technology is not at all difficult, since the form is prepared in advance. To perform all the necessary manipulations, it is better to use PVA glue or medium-fraction liquid nails.

Large particles will simply destroy the plastic, leaving sloppy spots on its surface. To achieve maximum strength, you should prepare masking tape. Using this material, decorative parts are pressed against the contour and adhesive strips are carefully applied, clinging them to the wall. The tape is removed after the structure has dried.

Conclusion

Each property owner can independently create a stylish arch at home. To decorate the surface, you can use any modern material. The greatest demand is for wallpaper, which can be paper, fabric, or vinyl. Both a specialist and a beginner can glue the prepared material. But to achieve a positive result, it is necessary to exercise maximum care, follow the technology, and also prepare the adhesive composition of the correct consistency.

More informative and interesting information on this topic is presented in the video:

Applying glue

Prepare the adhesive mixture. The arch is directed downward, and the weight of the wet sheet is large. Wallpaper glue may not give the desired result. Therefore, it is reinforced with PVA glue in a ratio of 2:1. Make sure there are no lumps.

Work begins after the mass swells and increases in volume.

• Apply the composition to the areas to be pasted. Carefully treat hard-to-reach areas.
• Using a thick brush, lubricate the back side of the cut fabric.
• Fold sheets of moisture-resistant products in half and leave for a few minutes for better soaking. Paper ones are glued on immediately.

Apply glue sparingly. A large amount of adhesive mass will lead to soaking and deformation of the sheets. They will be difficult to work with. And the defects will be noticeable after drying.

How to wallpaper an arch

In a modern interior, arches occupy a separate niche. They are becoming an increasingly popular way to decorate a doorway. Finishing the finished arch with completely different methods and materials, but the most cost-effective and, at the same time, beautiful in terms of the final result is wallpapering the opening. It is possible to wallpaper an arch, but it is a rather complicated process. But, if you approach the matter seriously and follow the work algorithm, you can get a positive result and carry out renovations in the apartment yourself.

Choosing a coating for an arch

Wallpaper for an arch must be durable and able to withstand constant loads and abrasion, since the arch often takes on mechanical loads, and its edges often crumble due to the material used. The following types of wallpaper are suitable:

1. Paper of any kind: structured, smooth, photo wallpaper, embossed and others. They are quite strong, but at the same time lightweight, which gives a chance to securely fasten them to the arch without worrying about the covering falling off.
2. Washable. This coating is distinguished by its practicality, which is very important for finishing an arch, since any dirt can always be removed. This type of wallpaper has a huge range of colors and patterns, so you can choose the right option. The joints of the wallpaper can be covered with decorative corners that adhere best to this coating.
3. Double-layer, for example, textile, bamboo or vinyl. Wallpaper is distinguished by its durability and beauty, which is very important for an arch. But you need to be careful with bamboo wallpaper in your apartment, since the overall style must be maintained.
4. Liquid wallpaper. It is a very convenient material for arches in terms of application, as it has the qualities of decorative plaster; it is applied and smeared over the surface. The coating does not have much in common with conventional wallpaper. There simply cannot be any joints or inconsistencies in such material. It is very convenient that a damaged piece of wallpaper can be easily removed and a new one added in its place. Their main drawback is rapid abrasion.

The difficulty is to ensure that the wallpaper is in harmony and combined with each other. Thus, the coating applied to the arch is very difficult to match the pattern with the wall covering, so it is recommended to use plain wallpaper or companion wallpaper with a small pattern that is not so noticeable when decorating the arches, having a common background.

We glue the arch with our own hands

In order not to be distracted by related work during the wallpapering process, you need to prepare the arched opening and the necessary tools in advance. You will need:

• Measuring tools such as square, tape measure.
• Pencil or felt-tip pen
• Sharp scissors
• Specialized reliable adhesive
• Leveling and decorative corners
• Spatula, soft bristle brush and soft cloth.

Preparing the opening

In order to avoid future problems with peeling wallpaper and crumbling of the edges of the arch, it is necessary to carefully prepare the arch. For these purposes, the construction market offers leveling corners, which are installed on the arch and secured with self-tapping screws or adhesive.

Before attaching the corner, the surface of the arch is cleaned of dust and dirt and thoroughly plastered. If a plastic corner is used, it is coated with glue and fixed in the opening.

The metal corner requires fastening with self-tapping screws, since it is quite heavy in weight, and the glue may not support it.

There is no need to screw in the screws too much, they should be at the level of the corner itself, otherwise waves may arise, which can only be removed with a decent layer of plaster. After the work has been done, the corner is coated with a finishing compound, left to dry completely and sanded to improve adhesion. The top of the prepared opening is covered with drying oil.

Pasting the opening

Ordinary wallpaper glue may not be able to withstand the weight of a strip of wallpaper, so it is better to prepare the composition in a 2:1 ratio, that is, 2 parts wallpaper glue and 1 PVA. After the glue has swollen, it is mixed and pasting begins.

They begin to glue the room from the window in such a way that the last piece does not reach 25 cm from the opening. This area and the wallpaper strip are smeared with glue and left to soak for 15 minutes.

Wallpaper is glued to the wall and the outline of the arch is cut out, making it slightly smaller. The edges are fixed in the inner part. To add reliability, the top edges are covered with glue. Using your fingers, the wallpaper is aligned and the correct edges are formed. The second side is also decorated, but only after pasting the area of ​​the wall above the door.

Paste over the vault

To begin with, cut out the strip of wallpaper required for the width of the arch, approximately 5 mm smaller than the actual size. The algorithm of actions at this stage is as follows:

1. Coat the inside of the arch and the wallpaper strip with glue for impregnation and leave them for 10 minutes.

2. A strip of wallpaper is fixed on one side from the bottom and glued higher along the arch, ending on the second side from the bottom.

Processing with decorative corner

It is better to choose a corner in a color that will contrast with the tone of the wallpaper. Pasting an arch with a decorative corner is a simple procedure, but it requires concentration. For gluing, it is best to use PVA or other reliable glue that is suitable for plastic and will not corrode it. The decor is smeared with glue, pressed against the opening, and then glued with masking tape so that the adhesive composition sets. After the structure has dried, this tape can be easily removed without harm to the wall covered with wallpaper.

Conclusion

You can independently create an arched opening at home, which is decorated with various types of wallpaper. Among them are fabric, paper, vinyl, glass wallpaper and others that can be glued. There is no particular difficulty in the process, but care, strict adherence to technology and the correct consistency of the adhesive composition are required.

Tools for work

It is important that the selected construction and finishing materials beautifully frame the arched structure, you need to carefully select them, but also use the right tool when gluing.

To work with paper, vinyl, textile and exclusive fabrics you need:

1. wallpaper glue for gluing a specific type of material,
2. several brushes of different sizes,
3. roller to smooth out air bubbles,
4. scissors,
5. pencil,
6. tape measure or long ruler.

If the arched structure will be decorated with liquid wallpaper, then you will need:

• spatulas made from different materials,
• trowels,
• rollers.

You will need to worry in advance about the “container” in which the silk plaster will be diluted.

What do people do with an arch? — Arch as part of the wall.

Recommended Posts

Recently viewed by 0 users

No registered user is viewing this page.

6 benefits of a small kitchen you may not have thought about

Quiz: Which kitchen style suits you?

10 useful tips for creating a comfortable kitchen

The best articles on the IVD website

• Construction and repair
• Foundation
• Roof
• Walls
• Window
• Doors and partitions
• Ceiling
• Balconies and loggias
• Internal structures
• Floor
• Water supply and sewerage
• Heating
• Ventilation and air conditioning
• Gas and energy supply
• Lighting
• Plumbing equipment
• Security and home automation
• Baths, saunas, swimming pools
• Construction Materials
• Decoration Materials
• Tools
• Technique
• Laws and finance
• TechnoNIKOL

• Design and decor
• Apartment
• Bedroom
• Kitchen
• Dining room
• Living room
• Bathroom, toilet
• Hallway
• Children's
• Attic
• Small rooms
• Workplace
• Wardrobe
• Library
• Decoration
• Furniture
• Accessories
• Vacation home
• Landscape

• Redevelopment
• Catalog of houses

• Magazine

• News

• Events

• about the project
• Advertising on the website
• Advertising in a magazine
• Terms of use

• Contacts

• about the project
• Advertising on the website
• Advertising in a magazine
• Terms of use

• Advertising on the website

• Advertising in a magazine

• Terms of use

• Contacts

Are you a professional architect or designer?

IVD. Repair and finishing

Are you a professional architect or designer?

The IVD.ru website is a leading Internet project dedicated to the issues of reconstruction and interior design of residential premises. The main content of the site is the archive of the magazine “Ideas for Your Home” - exclusive author’s articles, high-quality illustrations, practical tips and lessons. A team of professionals is working on the project in close collaboration with famous designers, architects and leading publishing experts.

On our website you can choose comprehensive design solutions; view detailed reviews of the market for construction and finishing materials, furniture, machinery and equipment; compare your own ideas with design projects of leading architects; communicate directly with other readers and editors on the forum.

Are you a professional architect or designer?

Preparing the opening

The next stage is the formation of the correct geometry of the opening.
For this purpose, a starting profile is used during preparation. It is metal, has special “petals”, which allows you to create a circle around the arched opening. Methods of fixing the profile: On plaster. This option is not considered the most reliable, but can be used. The corner is smeared with a plaster mixture, and the profile is recessed into it. It is easier to implement this method in a wide arch, where the circle has a large radius. Using self-tapping screws. This option is more reliable, because the profile is firmly fixed

It is important to recess the fastener heads so that they do not protrude on the surface. After installation, both the profile and the fastening screws are plastered so that they do not show through the wallpaper.

It is important to ensure comfortable pasting

Decorating the arch with wallpaper

The Dekada company is engaged in major renovations of apartments in Moscow. From us you can order both inexpensive repairs and exclusive work. We offer all clients:

• free preparation of estimates for apartment renovation work, • creation of a design project and technical specifications for apartment renovation.

By choosing our company, you can be sure that you are working with professionals - Dekada is a member of the SRO, and we provide a 3-year guarantee on all work performed. At the same time, the final cost of apartment renovation remains low in the Moscow market.

As an example, let’s consider the option of finishing the portal with wallpaper the way our craftsmen do it.

How to wallpaper an arch - preparatory work

Portals are mainly made of plasterboard.
Before gluing the wallpaper, the seams between the sheets and the places where the screws are attached must be treated using sickle tape. After this, the entire area is treated with a primer. When preparing glue for gluing wallpaper on a portal, you need to take into account that it should be thicker than for gluing walls.

Materials used

The material is selected taking into account:

1. Material quality;
2. Its prices;
3. Service life.

The most common materials used in the process of making arches:

• Drywall is the most popular material. Easy to use and quite durable, moisture resistant. Allows you to realize any fantasy, in any form. A variety of brands allows you to choose the one you personally need;
• Fiberboard is less popular compared to plasterboard because it is inferior in strength and reacts poorly to moisture;
• Gypsum - it is used to make very complex arch shapes. They can create a textured arch decoration. The work is very complex and painstaking, but all creative ideas will be revealed. There is no need to spend on decorative decoration;
• Wood is expensive. Emphasizes the richness of the interior. The arch looks powerful and reliable. For a wooden arch, it is better to invite a wood craftsman.
• Natural stone – stone laying can only be done by specialists. Labor and materials are expensive. The arch will be unique;
• Plastic is an economical option. Handles moisture well, easy to maintain (washes well). The difficulty is that this material is difficult to fit into many stylistic designs. You can choose the desired color scheme. But under mechanical stress, the plastic may burst.

Some features of pasting

With modern dense wallpaper, this method is quite difficult to implement, since the petals will be visible, and quite clearly. There are two ways out of this situation:

• Pasting with open mounting profile. Implementing this method accurately is difficult, but you can try. The first step is to paste over the vault of the arch, and the strip is cut out immediately or glued on first, and then the excess is cut off. The last option is more difficult, since the wallpaper gets wet and it is difficult to cut it straight. Next, they paste over the wall near the arch and also carefully trim it. A gap is left for both the vault and the wall, not reaching the edge by 2-3 mm. If you wallpaper the arch correctly, the result will be excellent. But the most difficult thing about this method is cutting the wallpaper evenly.
• The second option repeats the main method, only the margin for the petals is left small, within 1-2 cm. On the corner, by analogy with the primary profile that formed the corners, a finishing profile is mounted, it is also called decorative, using special glue. This solution creates an attractive decorative effect and makes pasting very easy.

Decorative profile for opening design

Wallpapering: a simple option

To make the arch arch neat, you need to follow the following sequence of steps:

• Wallpaper is glued to the wall without taking into account the arch.
• Without waiting for the glue to dry, cut out an opening with a margin of 3-3.5 cm.
• Next, the remaining free area is cut into petals, so that they do not reach the arch line. The cuts are placed at such a distance from each other that when folded they form a beautiful radius of the arch. This will have to be determined experimentally, since the radius of the upper edge of the arch varies.
• Next, the “petals” are smeared with glue, carefully applied to the arch and pressed.
• After drying, cut a strip along the length of the opening and a couple of millimeters less wide on each side. If it is not possible to make such a long one, then the strips are arranged so that they are connected in the middle of the arch, from above.
• Glue a strip from the floor, around the circumference of the arch, with a transition to the opposite side of the opening.

Preparation for pasting

Before you cover the arch in your apartment with your chosen wallpaper, you need to prepare for this process. The first stage is to select tools; you will need:

1. Wallpaper glue. The composition is prepared in advance, and in the case of an arch it is made thicker to slow down drying. In addition, this makes it possible to move the strip along the wall to match the pattern.
2. Pencil with ruler.
3. Scissors.
4. A clean rag or spatula for leveling the wallpaper.
5. Wallpaper.

Wallpapering openings You also need to prepare the opening itself. If there are significant deformations on the vault, it is plastered. Do the same with a plasterboard arch.

Preliminary surface preparation

Preparatory work is an integral stage of interior decoration in an apartment. The arched opening should be smooth and not have large depressions or protrusions on the surface.

List of necessary tools and materials:

• putty knife;
• putty;
• primer;
• leveling corner;
• glue or screws.

Work on preparing the surface for finishing begins with assessing the condition of the arched opening

Particular attention is paid to the vault - if it is curved, has potholes or chips, then it needs to be covered with a special leveling corner. This is a thin and flexible material, usually it is glued along the entire length of the arch on both sides of the arch

If a metal corner is used, it must be mounted on self-tapping screws.

You can check how smooth the walls of the arch are using a simple plumb line or a linear laser level.

When the edges of the arch are leveled, the entire surface is plastered with finishing plaster - this is necessary in order to hide the fasteners. The next layer is a primer, and it is better to choose a special composition for wallpapering - it hides all flaws well and paints the facade and arch white.

And if it’s not wallpaper, but painting the walls - is there a difference?

In the ongoing debate among experts and amateurs, what comes first: laying laminate flooring or installing doors; wallpapering or installing a door frame; laminate or wallpaper, etc. there is no question about when to paint the walls: before or after installing the doors. It turns out that no one questions the current practice: first you need to make the doors and only then paint the walls.

The explanation for this fact is simple. Firstly, the risk of swelling of the door frame and leaf after painting is reduced to zero. Secondly, painting will hide visible marks from the installation of doors. Thirdly, there are no difficulties when painting the wall near the platbands. In extreme cases, they can not be installed until painting or dismantled while the work is being carried out.

Source: StroyGuru.com