Painting a Eurofence: choice of paint and technological process

Painting a Eurofence with your own hands

Concrete surfaces need painting for two simple reasons - their service life is significantly increased and, without a doubt, their appearance is improved. The previous review of the site already talked about how to paint concrete walls. There is nothing complicated about this work and it can be done with your own hands.

As for painting the euro fence, in many ways this process is similar to the one described earlier. However, there are still some differences. It is about them, as well as about how to paint a Euro fence and what paint is best to do it, that will be discussed below.

Painting a Eurofence: step-by-step instructions, paint selection, features, photos

Having installed a eurofence, which is a simple concrete assembly, the owner of a house or summer cottage begins to think about how to paint it. After all, such a structure does not look aesthetically pleasing and does not please the owner’s eye at all. The thought of painting it yourself also arises. Is it possible to paint a Eurofence with your own hands? To find out about this, read on.

In what pattern can you make a Eurofence?

Since this structure is a simple prefabricated concrete structure, which is made in one color, you can use your imagination.

Depending on the concrete surface, the design on it may be patterned or grooved. Sometimes they imitate stone laying. You can also often find a combination of several colors.

This design looks very attractive and unusual.

Why is it necessary to paint a European fence?

Firstly, a European fence that is coated with paint better withstands all changeable weather conditions. Secondly, moss growth is kept to a minimum. Thirdly, a beautiful fence improves the appearance of the entire site. And fourthly, we get a protected, fenced area, which gives complete psychological confidence in our home, a feeling of comfort upon returning home.

Any enamel for painting a fence (including a concrete eurofence) must meet all the requirements in accordance with GOST or TU. When purchasing a model, you should choose the one that is intended for painting the facade. It should be remembered that the paint for painting the eurofence must contain antifungal additives.

Acrylic facade paint is best suited for painting a Eurofence. Such enamel should contain substances that can repel dirt and also not be afraid of high moisture.

The paint from the German manufacturer is rich in these properties. It does not contain any solvents. Is very resistant to abrasion. It also forms a good layer of protection.

The result is an aesthetic, elastic and durable coating.

Another paint that is perfect for painting and priming a Euro fence is produced by Capalac. This paint contains no aromatic hydrocarbons. It is also suitable for all surfaces.

Preparatory stage

Before covering the surface of a concrete fence with enamel, you should select a primer. If you do not trust a domestic manufacturer, it is recommended to choose a foreign one. It is the best in composition, with long wear resistance.

Experts do not advise saving on primer, because this is the main basis for the further service of the eurofence. But the choice always remains with the buyer - to make it for a long time or to make it cheaper and then lose even more.

In any case, today there are many different primers that have additional properties and are suitable for different tasks.

First, you should clean the surface of the fence from all dirt so that when applying paint there are no uneven spots or various protrusions of dirt.

After the surface is cleaned, you can apply a soil composition that has deep penetration to the entire depth of the concrete.

A sprayer is best because this is how the compound will spread over the uneven surfaces of the slab. Be sure to wait until the soil layer dries.

We cover visible defects on the Eurofence area. A rubber spatula works well for this. It should be used to correct all imperfections. This is a very routine process, but it is really necessary.

We cover the joints of the fence between the concrete beams with cement and sand. The recipe for preparation is as follows: for one part of cement there are three parts of sand. There are other means for the solution.

What's next?

After the solution of sand and cement has dried, it is necessary to clean the entire surface of the fence with sanding tape. For better protection, the entire fence should be treated with a deep penetration soil solution several times.

Painting of the euro fence occurs in warm weather. You should wait until the soil dries. A small amount of enamel should be used to paint all uneven areas. It should be applied in a thin layer. And the painting process itself takes place with a brush. The first layer is carefully applied with a roller to the main part of the fence. You need to let the enamel dry.

The first layer dries within a day or so. Only then do we apply the second layer. It is best to do this with a special tool, thanks to which the paint will lie evenly and neatly. Usually 2 layers serve long and reliably.

It’s better to choose a week with good weather conditions so that the enamel sets well and all layers dry (you can see what the finished result looks like in the photo).

Painting a Eurofence in color is a good option to make the structure unique.

For an interesting color, idea and design, you can even mix several different shades. You can show your imagination. It doesn't have to be one color. It is allowed to paint the fence in a color scheme that you like and brings comfort.

Other situations

It happens that the fence has the shape of a stone pattern. For this option, you can add some zest to the design with the help of paints. To do this, you should buy enamels of different shades, masking tape and accessories for working with this tape.

It is necessary to make the shape of future stones. This marking should be painted black. Then we attach masking tape to all painted features between the stones. We paint everything else white.

As in the previous version, it is best to apply the composition in two layers.

There are many options to make your concrete eurofence interesting, unusual and not like everyone else’s. To do this, you should come up with your own design, in which the design, relief and shape will be thought out.

For a better idea, as well as a possible addition, you can view photos of painting Euro fences in the article. The design can be very diverse.

To find out in more detail the question of how to paint a European fence with your own hands, you should watch different videos. This way you can definitely follow the step-by-step instructions.

Painting a Eurofence with your own hands. Painting a Eurofence: selection of material and stages of work

Concrete fencing needs painting for several reasons. Firstly, this way the material will last longer, and secondly, the fence will look much more attractive. In this article we will talk about painting a Euro fence with your own hands.

Why is it worth painting a European fence?

Eurofences are concrete structures that age over time and lose their performance properties. There are a number of reasons why concrete needs to be stained:

The material perfectly absorbs water, which gradually destroys it from the inside. This is especially dangerous when the weather is cold outside. When freezing, the water in the pores of concrete begins to expand, which leads to rapid deterioration of the structure. In spring and autumn, when the weather changes frequently, cycles of freezing and thawing are repeated repeatedly.
Moisture is also dangerous because it is a favorable environment for the life and reproduction of microorganisms, and this process occurs most quickly in warm and hot weather. As a result, the fence becomes overgrown with mold and unattractive spots appear on it.
Water in concrete pores encourages the growth of moss and lichens. They, in turn, absorb moisture. Constantly wet material begins to crumble quickly.
In large populated areas, where environmental conditions leave much to be desired, metal oxides, sulfuric acid, carbon compounds and other chemicals settle on concrete eurofences, which accelerate the erosion process.
A fence made of gray concrete simply does not look very aesthetically pleasing or attractive, which is an unfavorable psychological factor. Agree, it is much better to see a beautiful bright structure on your site than a dull gray fence surface.
It is also worth painting a European fence in order to give it individuality and make it stand out from the background of neighboring fences.
The eurofence can be made part of the overall landscape design, fitting it into the stylistic design of the house and site.

From all of the above, we can conclude that by painting your concrete fence, you will significantly extend its service life, and also make it a stylish element of your yard.

Choice of shade and composition

Before painting the eurofence, you should decide on the color and composition of the paint that you will use in your work. As for the shade, in this matter you should rely on your preferences.

It is desirable that the fence be in harmony with the home and garden plot. To do this, for example, it can be painted in the same tone as the roof of the house.

However, painting a European fence can be your original, unique solution.

If a eurofence imitates the structure of some natural material, this feature can also be emphasized using paint

When choosing paint, consider the degree of matteness. It is known that glossy compositions strongly highlight all the roughness and imperfections on the surface, while matte ones, on the contrary, mask them.

Before buying paint for a European fence, calculate the required amount of material in advance so as not to buy more later. Try to purchase products from the same batch to avoid discrepancies in shades.

If your euro fence is smooth and you want to give it an interesting texture, use special textured paints for this. By the way, such substances best protect concrete from the negative effects of the external environment.

Materials of different compositions are used for finishing concrete. You can choose one of the following options:

Silicate dyes harden quickly on the surface, tolerate temperature fluctuations well, and do not fade in sunlight.
Oil paints are cheap, have good moisture resistance, and perform bioprotective functions, preventing the growth of bacteria and fungi in the pores of concrete. Their disadvantage is that such dyes fade over time in the sun.
Acrylic compounds are characterized by increased strength and are not afraid of mechanical stress. They are environmentally friendly, have almost no odor, dry quickly, and adhere well to the concrete base. Their disadvantages include their fairly high cost.
Latex paints are strong and durable, have high elasticity, thanks to which they can withstand sudden temperature changes. They do not allow moisture to pass through and are slightly cheaper than acrylic ones.
Water-based compositions are absolutely environmentally friendly and safe, are inexpensive, and have economical consumption. Their disadvantage is their low resistance to moisture and temperature, as well as to mechanical stress.

Options for painting Euro fences, photo:

Manufacturer's choice

The modern construction market offers many options for paint that can be used to decorate a European fence. Let's look at the most popular manufacturers of this product.

The leading position in the facade paint market is occupied by the German company Caparol. Its products are distinguished by high quality and reliability. The company's most popular products are:

Alpina MegaMax Universal is a universal facade paint with a matte texture, the main feature of which is its high resistance to adverse external influences.
Alpina MegaMax Fassade is an environmentally friendly compound with improved wear resistance and extended service life. Among the positive properties are moisture resistance and vapor permeability, as well as good bioprotective characteristics.
Disbocret 518 Flex-Finish, Disbocret 515 BetonFarbe are compositions that protect concrete from the penetration of chemicals and perfectly mask cracks.
Amphibolin is a matte texture paint with increased adhesive properties.
AmphiSilan Plus is a composition that creates a smooth matte surface with increased water repellency. Despite its hydrophobicity, this paint has good vapor permeability.

Paints from KrasByt are considered a more affordable, but also quite high-quality option. Their products are represented by the following names:

Aquabetol is an acrylic paint. It is environmentally friendly and easy to apply; you can dilute it yourself to the desired consistency.
Betylate is a dye with increased resistance to atmospheric conditions. Available on acrylic or silicone base. It is diluted with butyl acetate or white spirit, and it can be applied even in frost, starting at a temperature of -15 °C.
Betil is a high-quality and durable enamel with good wear resistance. It can be used at temperatures above -20°C.
Polymerdecor is a polyurethane-based enamel that is resistant to aggressive chemical environments. Features a long service life.

Alternative options for the above paints are:

Kivitex is a paint produced by the Finnish company Tikkurila. It has a matte texture and is made on the basis of liquid potassium glass. This composition can be used at temperatures of +8 °C and above.
Novasil is a water-based dye with a silicone filler, produced on an acrylate base.
Teknos SAKU is an acrylate composition on a water-dispersion basis. It is characterized by increased alkali resistance.
Siloxane facade is a Finnish mineral paint based on silicone. It is water-soluble, vapor-permeable, but has increased moisture resistance.

Options for painting euro fences with lattice, photo:

Painting the euro fence

To paint a concrete eurofence, prepare the following:

paint;
roller or spray bottle;
small brush;
a tray into which you will pour paint;
paint thinner;
protective equipment: clothing, gloves, glasses.

Let's look at the painting process step by step:

It is better to paint the fence in dry and warm, but not hot weather. It is important to wait for the primer to dry before starting the process.
Pour a small amount of paint into the tray and use a brush to cover all hard-to-reach areas.
Use a large fur roller to paint the main part of the fence. Instead of a roller, you can use a spray bottle. This will make your job faster and easier, but the layer of dye you apply with a roller will last longer. You can combine tools, for example, treat the concrete the first time with a roller, and the second time with a spray gun.
The first layer must be allowed to dry, this will take from 12 to 24 hours. When the surface is ready, paint it again. As a rule, two layers are enough for the layer to be beautiful, uniform and reliable.
To help the paint dry better, check the weather forecast for the coming days in advance. It is advisable that there is no rain, fog, snow or other difficult weather conditions at this time.

Painting a European fence with a spray gun, video:

Painting a European fence to look like stone

If you have a fence installed on your site, the surface of which imitates natural stone, you can emphasize its texture with the help of paints. To do this, prepare compositions of different shades, painting tools and masking tape.

Mark the fence according to the shape of future stones. Paint these lines with a dark shade and wait until dry. Then seal the borders between the “stones” with masking tape and paint the remaining areas with a lighter color. As in the previous case, it is better to apply the paint in 2 layers.

When the surface is dry, peel off the tape and your stone fence is ready.

Painting a European fence, photo:

Painting a Eurofence with your own hands

Preparatory stage

Before starting work, cover everything near the fence from paint, be it plants, benches, sculptures, etc. The fence itself must be cleaned of dust, dirt, old coating and other debris. It is advisable that the fence be cleaned not only dry, but also wet. Take a bucket of water and a rag and wet the concrete. After 10 minutes, work with a stiff brush; for better results, you can use soapy water or some kind of cleaning agent.

After cleaning, wash off the dirt from the fence using a hose, and then treat those areas where there was fungus or mold with special products. Coat all metal parts with an anti-corrosion compound.

Dry the structure and seal cracks and crevices in it, if any. To cover damage, prepare a solution of 1 part cement and 3 parts sand, as well as water.

The dry surface of the eurofence must also be coated with a primer, which will ensure better adhesion of the paint to the concrete. It is worth noting that primers come in different compositions. When choosing the appropriate option, rely on what kind of paint you will use; both compositions should have the same base.

Painting the euro fence

To paint a concrete eurofence, prepare the following:

paint;
roller or spray bottle;
small brush;
a tray into which you will pour paint;
paint thinner;
protective equipment: clothing, gloves, glasses.

Let's look at the painting process step by step:

It is better to paint the fence in dry and warm, but not hot weather. It is important to wait for the primer to dry before starting the process.
Pour a small amount of paint into the tray and use a brush to cover all hard-to-reach areas.
Use a large fur roller to paint the main part of the fence. Instead of a roller, you can use a spray bottle. This will make your job faster and easier, but the layer of dye you apply with a roller will last longer. You can combine tools, for example, treat the concrete the first time with a roller, and the second time with a spray gun.
The first layer must be allowed to dry, this will take from 12 to 24 hours. When the surface is ready, paint it again. As a rule, two layers are enough for the layer to be beautiful, uniform and reliable.
To help the paint dry better, check the weather forecast for the coming days in advance. It is advisable that there is no rain, fog, snow or other difficult weather conditions at this time.

Painting a European fence with a spray gun, video:

Painting a European fence to look like stone

When the surface is dry, peel off the tape and your stone fence is ready.

Painting a European fence, photo:

Eurofence painting technology

A reliable and original type of fencing is the Eurofence. It serves as a real decoration of the area adjacent to the house. To give such a fence a personal touch, it needs to be painted.

Painting a Euro fence will not only make it more attractive, but will also help eliminate any imperfections on the material.

Using certain paints and varnishes you can eliminate cracks and defects on the surface.

Concrete fences need painting for several reasons. Due to coloring, its service life increases and its appearance changes for the better. Over the years, concrete structures age under the influence of natural phenomena, losing their original attractiveness. Therefore, there are the following reasons for painting:

The material is constantly exposed to moisture, which leads to its destruction.
Due to exposure to moisture, dangerous microorganisms develop, especially in warm weather.
In the pores of concrete, water causes moss and lichens to appear.
In large cities, copper oxides, sulfuric acid and other chemical compounds settle on concrete fences, accelerating the erosion process.
A gray concrete fence does not look attractive, so it is better to paint it a more pleasant color.
Using paint, you can add personality to your fence so that it stands out from the background of neighboring buildings.
The eurofence is an integral part of landscape design, to which its color must match.

To find out how to paint a Euro fence with your own hands, you need to look at the information and step-by-step instructions. This will be discussed in our article.

Choosing a shade and composition for painting

Different materials are used to paint concrete. When you plan to paint a Euro fence with your own hands, you choose one of the following options:

Silicate dyes that dry quickly.
Cheap oil paints that are moisture resistant.
Acrylic paint for eurofence has a high level of durability.
The most durable are latex paints, which are highly elastic.

If you choose what to paint such a concrete fence with, it is better to give preference to German-made facade paints.

You can avoid premature destruction of the fence as a result of the harmful influence of atmospheric phenomena - to do this you need to cover its surface with coloring mixtures. Painting a European fence will not only make it more beautiful, but will also reliably protect it from destruction.

The key to the quality of a painted fence is the correct choice of materials. To paint fences you will need the following tools and materials:

Deep penetration primer;

All materials must be waterproof and resistant to sudden temperature changes. It is recommended to use facade, acrylic or silicone paint.

On video: how to beautifully paint a European fence.

Dyeing process

The painting process includes four stages. The first step is to putty the seams using putty for exterior use. After the plaster has dried, it is necessary to apply a layer of waterproofing using a spray gun. Next, the primer is applied to the surface of the fence and posts.

Allow the primer to dry completely. Only after this can you start painting the fence.

Painting must be done using a spray gun or spray gun. First, the first layer of paint is applied, and after it has completely dried, painting is done a second time. The choice of color depends on the taste of the owner of the fence.

Painting a concrete fence is not particularly difficult. The result is an attractive fence. But the choice of paint must be approached responsibly so that you do not have to repaint the fence after a few months.

Despite the large selection of paints and varnishes on the sales market, not all of them are suitable for painting Euro fences. The best choice would be facade paints, which form a strong, durable and inexpensive coating. As a rule, such paints are produced in white. Next, color is added to it, which must be thoroughly mixed with a puncher so that the paint color is uniform.

When buying paint, you need to take into account the fact that concrete absorbs paint intensively, so it is better to buy it with a reserve. Moreover, the paint is applied in two layers. Having selected the paint, you should also take care of the auxiliary materials. Here you will need to purchase:

acrylic primer;
solvent for removing drips;
masking tape as a delimiter.

It is best to apply paint to the fence using a spray gun, then it will take a little time, but the result will be wonderful. It is recommended to paint openwork concrete fences using a spray gun.

To prevent paint from getting on surrounding objects, you need to install a barrier shield. Only a surface that has been carefully prepared for painting, cleaned of dirt, is ready to be painted in an even layer.

It is also necessary to eliminate all existing defects on the fence.

Painting a Eurofence: choice of paint and technological process – Ice Advice

Painting a Eurofence with your own hands

How to paint a Eurofence

Before painting a European fence, you should decide on the choice of paint and varnish composition and find out the nuances of performing this work. The paint color for the euro fence can be chosen at your own discretion, you can choose “like your neighbor’s” or something more original (to be different).

The most important thing is that the coloring composition is completely suitable for painting concrete fences. Therefore, when considering the question: how to paint a Euro fence, you should familiarize yourself with the following paint and varnish compositions intended specifically for these purposes:

Oil paints are inexpensive, perfectly repel moisture, and even have bioprotective properties. Their biggest disadvantage is that they fade quickly in the sun;
Silicate paints - tolerate temperature fluctuations well, practically do not fade when exposed to sunlight and dry quickly;
Acrylic paints also dry quickly, are odorless, and adhere well to a concrete base;
Latex paints do not allow moisture to pass through and withstand the negative effects of ultraviolet rays well. In addition, latex paints have a fairly high degree of elasticity;
Water-based paints are inexpensive, harmless to humans and the environment. The advantages also include low consumption. However, this type of paint also has disadvantages: low resistance to moisture and temperature fluctuations.

To paint a eurofence, you can choose any of the above paints. However, if you want the paintwork to last as long as possible, preference should be given only to high-quality materials.

How to paint a eurofence

Painting a Eurofence, like any other concrete product, begins with careful preparation of its surfaces. First of all, you need to clean all painted surfaces of the Eurofence as thoroughly as possible. To do this, you can use water and soapy water, rags and a stiff brush.

If a fungus appears on the eurofence, then after cleaning these places, they must be treated with special antiseptic preparations before painting. Do not forget about metal elements; they must be coated with anti-corrosion compounds.

The next step before painting the euro fence is its primer. The primer composition should be selected for the material on which the paint will be applied, as well as for the paint and varnish composition itself. You can always obtain this information at the point of purchase of the paintwork.

To paint the eurofence, you can use either a roller or a spray bottle. Of course, it is more convenient and faster to do this work with a spray bottle, but, unfortunately, not all owners of private houses have one.

Therefore, armed with a roller, first paint the main parts of the euro fence, and the remaining, hard-to-reach places should be painted with a paint brush. After the first layer has dried, which is at least 12-24 hours, a second layer of paint is applied.

It is recommended to paint the eurofence only in calm and dry weather. At the same time, it is ideal if it is not hot outside. Therefore, it is better to look at the weather forecast for the coming days in advance. Well, you can read about how to build up a Eurofence by going to another site review by clicking on the highlighted link.

Painting the euro fence

Any concrete structure, and the eurofence is exactly that, “grows old” over time and loses the beauty of its appearance. In addition, eurofences, under the influence of precipitation, can be seriously damaged, chips and cracks appear on their surface. In many ways, it is painting the Eurofence that can prevent all of the above negative impacts, as well as prevent its premature destruction.

And if you are still hesitating over whether you need to paint the Eurofence or not, then here are some simple arguments in favor of painting any concrete structures, including Eurofences:

Concrete absorbs moisture abundantly, which, especially in winter, destroys it directly from the inside;
The danger of moisture for Euro fences also lies in the fact that it is a favorite habitat for various kinds of microorganisms. Therefore, you should not be surprised that moss, mold and mildew may appear on an unpainted fence over time;
The gray appearance of the Euro fence, of course, looks neat, but it cannot be called attractive, much less original. By painting the fence in different colors, you can highlight your yard, make the fence even more beautiful than your neighbor’s (just kidding, of course);
Well, there is probably no need to say that correctly selected paint for a European fence will help make the product part of the landscape design.

There are probably enough arguments in favor of why painting a European fence is a very important, and most importantly, final stage after installing a concrete fence.

How to paint a Eurofence

Oil paints are inexpensive, perfectly repel moisture, and even have bioprotective properties. Their biggest disadvantage is that they fade quickly in the sun;
Silicate paints - tolerate temperature fluctuations well, practically do not fade when exposed to sunlight and dry quickly;
Acrylic paints also dry quickly, are odorless, and adhere well to a concrete base;
Latex paints do not allow moisture to pass through and withstand the negative effects of ultraviolet rays well. In addition, latex paints have a fairly high degree of elasticity;
Water-based paints are inexpensive, harmless to humans and the environment. The advantages also include low consumption. However, this type of paint also has disadvantages: low resistance to moisture and temperature fluctuations.

To paint a eurofence, you can choose any of the above paints. However, if you want the paintwork to last as long as possible, preference should be given only to high-quality materials.

Painting a Eurofence – how and how to paint a Eurofence?

Painting a Eurofence with your own hands

Instructions for decorating a concrete fence with paints and varnishes

Before you start decorating the eurofence with your own hands, you need to prepare its surface:

repair cracks and chips with cement mortar;
treat sections with a waterproofing mixture. It is better to apply it using a spray gun, this will ensure even distribution of the product. The drying time of the waterproofing is 24 hours;
Apply a deep penetration primer in 1-2 layers.

Note: the primer composition will provide concrete with resistance to environmental influences and improve adhesion to paint.

Fence painting technology

How to paint a Eurofence with your own hands so that the coating is of high quality and durable? To do this you need to apply it with a spray gun. This will allow you to process the relief surface of the structure as efficiently as possible, including hard-to-reach places.

Before painting the fence, the color is mixed in a container so that it is uniform. The paint must be brought to a state of medium viscosity - this way it will be better distributed by the spray gun.

To cover the Eurofence, use a nozzle with a diameter of 2 mm. The paint is distributed in a thin layer, starting from the top of the structure, evenly moving down. This will avoid leaks. Each subsequent layer is applied only after the previous one has completely dried (from 12 hours to 24 hours). If you adhere to this technology, the painted fence will last for many years without losing its presentable appearance.

Tip: painting the structure is best done on a dry and clear sunny day. These are optimal conditions for uniform application and drying of the coating.

How to paint a Eurofence: choosing material for concrete, preparation and painting – Home Landscapes

A reliable and original type of fencing is the Eurofence. It serves as a real decoration of the area adjacent to the house. To give such a fence a personal touch, it needs to be painted.

Painting a Euro fence will not only make it more attractive, but will also help eliminate any imperfections on the material.

Using certain paints and varnishes you can eliminate cracks and defects on the surface.

The material is constantly exposed to moisture, which leads to its destruction.
Due to exposure to moisture, dangerous microorganisms develop, especially in warm weather.
In the pores of concrete, water causes moss and lichens to appear.
In large cities, copper oxides, sulfuric acid and other chemical compounds settle on concrete fences, accelerating the erosion process.
A gray concrete fence does not look attractive, so it is better to paint it a more pleasant color.
Using paint, you can add personality to your fence so that it stands out from the background of neighboring buildings.
The eurofence is an integral part of landscape design, to which its color must match.

To find out how to paint a Euro fence with your own hands, you need to look at the information and step-by-step instructions. This will be discussed in our article.

Painting a Eurofence – how and how to paint a Eurofence?

Painting a Eurofence with your own hands