Raptor protective paint - properties and application instructions

Modern car paints are of very good quality and have excellent characteristics; with their help you can protect your car from possible damage, scratches and many other problems. However, not in all cases, even very good modern paints can save a car from negative external influences. That is why painting your own car with Raptor can be a very reasonable and competent decision.

Most often, Raptor is used for jeeps, pickups, trucks and other vehicles that are usually used in harsh natural conditions. The fact is that ordinary paint, no matter how high-quality and reliable it is, can quickly become covered with various scratches and other damage. As you know, scratches for any car are a very dangerous thing, since rust can form at the site of the scratches.

That is why painting a car with raptor, that is, a special substance designed for trucks, pickups, SUVs and other similar vehicles, is a very reasonable and correct choice.

Paint application area

Raptor U-POL paint is a two-component paint and varnish material (LCM) that creates a protective coating of increased strength. This characteristic makes Raptor very different from conventional car paints.

The material restores even the most worn-out body coating, creating a film resistant to the following damaging factors:

• extreme temperatures, harsh climate;
• rust (corrosion);
• salt;
• mold;
• scratching, friction;
• ultraviolet radiation;
• dirt.

Raptor is also suitable for creating sound insulation, because after applying paint, the insulation characteristics of the car are significantly increased. The scope of application of auto enamel is varied. Its application is indicated on bumpers, plastic body kits of cars, especially SUVs and other off-road vehicles.

This material should be used by car enthusiasts who often go outdoors, hunting, or fishing. After painting, the car will not be afraid of curbs, roadsides, or icy surfaces - scratches will no longer appear.

After an accident, it is recommended that all car owners use Raptor. With higher quality, painting costs will be similar. As a result, a durable coating 2–3 mm thick is guaranteed, which will mask all surface defects. To update the appearance of Raptor U-POL is used on ATVs, bicycles, boats, and any equipment for outdoor activities.

a brief description of

Car paint Raptor is an ideal two-component urethane substance to protect the paintwork of a car from the effects of water, dirt and other negative factors. Protects against the appearance of rust, mold and the effects of sudden temperature changes. In addition, after applying this enamel to the body, the degree of surface strength increases in relation to the effects of ultraviolet radiation and mechanical damage.

The Raptor product is capable of maximally restoring already damaged coating. Moreover, the paint is available in different colors - from dark blue to bright yellow. Everyone will be able to choose the optimal color solution for themselves.

Advantages and disadvantages of paint

The paint and varnish material has many advantages. Basic:

• the finished coating is incredibly durable, resistant to mechanical and chemical damage, but quite elastic, so it does not crack and can bend along with the plastic;
• the paint film does not fade or darken over time;
• painted body parts do not need polishing;
• applying paint is very easy; for this you can use various devices, including a brush;
• You can work with paint even outside - the sun, dust, wind will not prevent the coating from drying normally;
• the cost of repairs is moderate, especially considering the highest quality;
• washing and cleaning the car will be very simple;
• the level of vibration and noise after painting will be significantly reduced;
• You don’t have to worry about rusting of parts - after treatment with paint it is eliminated.

The disadvantages include some dullness of the coating, so the Raptor cannot be varnished. The disadvantage is a significant increase in consumption when applied with a roller or brush: professionals always choose automated types of painting.

“Pure” Raptor is sold in black and white: if tinting is necessary, you will have to buy additional pigments.

Like any paintwork for cars, Raptor U-POL is not safe for the body - you will have to work in the air or with the use of protective devices. Before the paint hardens, it is toxic, but after drying it is not harmful to humans.

Main advantages

Let us list all the advantages of the material, thanks to which it has become in demand among car owners:

• paint consumption is optimal, it is enough for a fairly large area;
• application can be carried out in any way (roller, brush or spray);
• the paint dries in a fairly short time;
• During operation, the coating does not fade or fade, and can withstand certain loads under mechanical stress;
• excellent performance in providing noise and vibration insulation;
• a very high degree of adhesion is inherent;
• preparing the surface for painting does not require any special techniques;
• When performing work, no special conditions are required; painting can be done even on the street;
• the paint does not require any special actions in preparation for work; just shake the aerosol well;
• the period of action of the applied substance is quite long, so there is no need to carry out treatment frequently;
• application can be carried out either directly on the metal or on the old coating;
• no need to seal with varnish after application;
• wide range of applications, the paint is especially good as an anti-vandal agent.

On video: review of Raptor paint.

Packaging, colors, features

Raptor U-POL paint is sold in a variety of packaging - in spray cans, large cans, bulk cans, and barrels. They should be purchased based on the area to be painted. There are packages of 3 - 4 bottles, each of which includes 0.75 liters of paint, other packages contain 1 - 2 cans per 1 liter.

Complete set of Raptor U-POL: the actual coloring composition and hardener, which is required to fix the material. One bottle of hardener is enough for 10 - 12 square meters. m of cultivated area.

Some Raptor kits include a gun for applying paintwork (anti-gravel gun GUN/1), although it may not be used for work. A brush for processing the bottom and lower parts of the sides will have to be purchased additionally, as well as pigments for tinting.

Staining order

The pigment is introduced into the paint and varnish material before adding the hardener. The amount of color determines the brightness of the finished coating, which must be taken into account in advance. In order not to make a mistake with the shade when coating individual parts, it is better to carry out tinting using special equipment. For painting small equipment and bicycles, it is quite possible to do the coloring on your own.

Materials, tools

It is best to paint using a special sprayer that has a spray control function. This will help reduce the number of air bubbles formed and eliminate the presence of strokes that the brush leaves.

But, as indicated in the instructions, if you have certain skills, you can use rollers and brushes for the job. A small brush should be on hand for touching up hard-to-reach areas.

You need to put rags and rags on your work area to remove paint drops and streaks. For preparatory work you will need a grinding machine.

Preparation

The better the preparation of body parts, the better the final result in painting. First, remove all unnecessary accessories from the machine:

• wipers;
• pens;
• mirrors;
• bumpers and others.

All non-removable parts that will not be painted should be covered with paper tape around the edges and covered with paper. You can remove the paper only after the paint and varnish coating has completely dried.

It is highly undesirable to apply new paint over old paint. In defective areas, the thickness of the coating will vary, and the durability of the finished film will decrease. The entire surface of the parts must be thoroughly cleaned of old paint, for which a grinding machine with a fine abrasive is used. This should not be done manually due to the risk of reduced quality.

The next procedure is as follows:

• remove dust, dirt, and small particles of paint that appear after sanding manually or using a compressor;
• wipe all parts with anti-silicone and white spirit;
• chips, holes, and other defects are filled with special automotive putties;
• allow the parts to dry thoroughly;
• treat the products with a special auto-primer and dry again;
• Start painting the body.

Security measures

The material is highly flammable. When a fire hits, the paintwork immediately flares up, so there should be no sources of combustion near the place of work - cigarettes, stoves, etc. In the garage, it is better to check the wiring in advance to prevent short circuits and ignition.

During work, there is a risk of damage to the mucous membrane of the eyes - its inflammation, drying out, and therefore you should work in safety glasses. Due to allergies and drying of the skin of the hands, they work only in comfortable gloves, and wear special clothing on the body.

Since inhalation of toxic fumes leads to poisoning, the following safety precautions should be taken:

• the room should be well ventilated, and even if there is a general exhaust hood, it is better to install additional mechanical ventilation;
• You should use a respirator and go out into fresh air as often as possible;
• After finishing work, all used devices and materials must be filled with water until they are cleaned (solvents are used for this), the rags should be packed in tight bags, and then disposed of.

To avoid damage and fire, store Raptor paint in a dark place, out of direct sunlight, at a temperature not higher than +70 degrees. The container must be tightly closed.

Instructions for using paint

First, you should dilute the paint with a hardener. For 3 parts of Raptor, 1 part of the hardener, which is included in the kit, is injected. There is a mark on the paint can up to which the hardener is poured (for 750 ml of the main composition you will get 250 ml of the latter). Then the jar must be tightly closed and its contents shaken for 2 - 5 minutes to thoroughly mix.

The operating procedure is as follows:

1. Screw the gun onto the can and connect the hose from the compressor.
2. Start applying the first coat of paint, starting with the roof of the car.
3. You must act with uniform movements, without jerking, hold the gun 50 cm from the part (the layer should lie without overflow).
4. Too thick a layer causes a decrease in the mechanical strength of the paint, so the thickness of each sublayer does not exceed 1 - 1.5 mm.
5. To dry the first layer you need 0.5 - 1 hour at a temperature of +20 degrees, after which you can apply the second in the same way.
6. The total polymerization time for Raptor is up to 5 – 7 days, but operation of the car is permissible after 12 hours (loads and mechanical stress are excluded in the first week).

For tinting, you should buy a Raptor set with white (milky) paint. There are pigments from the same brand in stores that are ideal. The amount of color added does not exceed 10% of the paint weight. If you have difficulty with tinting, you should contact a professional colorist.

To accurately select a color when painting individual parts, find out the VIN code of the car’s paintwork in advance, and then look for the color using special reference books.

Procedure for removing paint from a car

Removing a coat of Raptor U-POL paint that has already dried is quite a task. Doing this manually using sandpaper is difficult, ineffective and time-consuming, because the paper immediately gets clogged.

Using an angle grinder is simply dangerous, since the abrasive wheel creates nicks, defects, and chips on the body that will need to be puttied. Only putting a metal brush on a grinder or drill will allow cleaning to be more effective, but large parts often overheat and become deformed.

It is best to use a construction hair dryer, which is used to heat the base, and then remove the material with a special narrow sharp spatula.

Painting a car with U-POL Raptor urethane paint

Paints for coating the bodies of modern cars have excellent characteristics and a glossy appearance.
However, on jeeps, pickups, and trucks operating in harsh natural conditions when transporting goods, ordinary paint can very soon become covered with scratches from branches or abrasions from transported goods. As a result, rust appears at the site of the scratches, and the car loses its attractive appearance. There are many products on the market for repairing car bodies. We suggest you choose products from the U-POL brand, which has more than 60 years of experience in this field. Polyurethane raptor coating and consumables for it from U-POL are specially designed for application as a protective coating on the bodies of pickup trucks, SUVs and trucks.

Paint price

The cost of a set of 4 750 ml jars of paint and hardener is about 6,000 rubles. The kit does not include a pistol, which is sold additionally (approximately 1,700 rubles). Sets with a pistol are sold for 7400 – 7700 rubles.

To paint a whole car (sedan) you need about 3 sets, you will have to pay for the work of a specialist (from 4000 for one part). If you paint it yourself, you can save costs at this point, but if you are not confident in the quality result, it is better to trust a professional.

Bottom line

Raptor is a very reliable and high-quality product that allows you to protect your car from a number of external negative influences, and therefore extend its service life. Painting cars with Raptor is a very smart choice for those who want to protect the surface of their own car from negative influences: moisture, corrosion, sunlight and others. Raptor is best used for SUVs, pickups, trucks and other vehicles that are used in harsh natural conditions.