Types, features and advantages of slate paints

Slate paint

Slate paint and varnish is a new product among finishing materials. If you paint a wall in a living room, kitchen, nursery or other room with the product, you can make various notes and sketches on the surface, and then easily wipe them off with a rag. People often call the coating chalky - the product is matte, durable, slightly rough.

Slate paint and varnish was originally created for the restoration of school boards, but designers quickly noticed it and began to use it in interior design. Using paint, you can radically update a room and make it unusual and stylish.

Such wall paint can perform not only a decorative, but also a practical function, participating in the entertainment and education of children. If you introduce magnetic powder into the material in a special proportion or apply a magnetic primer after drying, magnets and metal products will stick well to the surface.

Paint and varnish can be applied to bare walls or wallpaper to be painted, effortlessly creating a place for creativity and play, or stylizing the room as intended.

What color does it come in?

Special paintwork materials for chalk or chalk markers are standardly black, but if you want, you can find almost any color from the palette.

Blackboard green, bright blue or purple, noble burgundy, unusual turquoise. Many manufacturers produce white blanks so that everyone can tint them in the shade they need.

Features of the product

Slate paintwork materials are made on the basis of latex - the product is easily diluted with water and does not contain solvents harmful to health. What is the secret of a unique appearance? The composition of the slate-magnetic material contains the smallest particles of iron, allowing the coating to serve as a real magnet after drying. To give a matte texture with a blackboard effect, gypsum, cement, modifiers, acrylic resins, marble chips, and dolomite are added to the paint.

You can cover the walls with either standard gray paint or use a colored coating. Different types of paint are sold: blue, black, brown, green, purple, white paint, which can, for example, paint a refrigerator or be used for tinting. By adding pigments to white paintwork materials, you can get absolutely any shade, although dark and bright tones are usually preferred in the interior.

How to create a chalk surface at home?

Decorating a graphite board or chalk surface with your own hands is not that difficult. Most often, they resort to special paint, wallpaper or self-adhesive film for this.

General procedure for painting:

• if the surface is too smooth, go over it with coarse sandpaper;
• wash and degrease;
• if necessary, prime for better adhesion of the paint to the surface;
• wait until dry, sand with fine grain sandpaper;
• Apply paint according to the instructions on the package.

When using wallpaper or self-adhesive:

• thoroughly wash and degrease the surface;
• read the instructions carefully: different types of wallpaper require different types of glue;
• some wallpapers and self-adhesive materials will require the surface to be as smooth as possible, in which case sanding and polishing may be necessary;
• Some self-adhesive materials are best applied to a damp surface, others require maximum dryness, check this point before installation.

Idea for updating your refrigerator with chalk paint

Slate wall in the interior of the balcony

Mini chalk board

Cabinet door with chalkboard function

Chalk board in a modern setting

Materials for dyeing

Almost any surface can be painted. Most often it is necessary to coat concrete walls, which are pre-applied with plaster, putty and primer.

Paintwork works well on the following materials:

• metal;
• glass;
• ceramics;
• drywall;
• wood, fibreboard, chipboard, OSB;
• wallpaper, glass wallpaper.

To create a durable coating, it is better to apply not one, but several layers of paint. If you plan to use the wall as a magnet, multi-layering is a must, otherwise iron objects will fall. Products that are too heavy will not stay on the wall.

Where and why is it used?

There are many uses for metallic wall paint. It all depends on your imagination and needs.

• Kitchen walls, for the convenience of leaving notes for family members , not to mention important notes that need to be remembered.

The refrigerator has a small surface area, while the size of the magnetic coating can be at your discretion.

• Applying magnetic primer in the living room or hall will help diversify your decor with various designs or light paintings.

Especially if you have creative children, such a wall will help preserve the color of the walls, because what is written is easily erased .

• Child's bedroom.

All children are unique creative individuals who love to decorate their space with drawings or crafts. Also post your own achievements in various areas, such as diplomas or certificates.

It’s worth mentioning your favorite idols, whose posters decorate almost every room.

In such cases, adhesive tape can damage the surface, and magnets will help you replace outdated paintings without damaging the decor.

• Graphite-magnetic paint will become an indispensable assistant in offices.

Especially in rooms where meetings or planning sessions are held. Instead of installing an expensive metal board, it will be more convenient and economical to cover the wall with metallic paint.

• Schools.

In these institutions, advertisements are often posted and for this they have to additionally install notice boards , but even these are not enough.

And if the wall on which the notice board is located is covered with a special magnetic primer, then any message can be placed nearby, attaching it only with a small magnet.

• Many people like to collect all sorts of magnets . Especially for those who frequently travel the world, the refrigerator door cannot always accommodate all your souvenirs, so they may migrate to the wall nearby.
• Magnetic soil is often placed on the walls of cafes and eateries; orders or photographs are attached , even various customer reviews or wishes. Achievements of the institution and many other things.

Magnetic coating has a number of advantages, the main one of which is a long service life . Not to mention the possibility of applying this coating on any flat surface of the required size.

Well, how to choose the right paint for other walls in your apartment, we’ll figure it out in this article.

Types of paint

The product is sold in the form of a spray (aerosol) and in ordinary jars used for painting with a brush or roller. To paint large areas, it is better to purchase a set of regular liquid paint and painting supplies. Various hard-to-reach places, small objects and individual elements in the interior are usually painted from cylinders.

Depending on the properties and composition, slate paintwork materials, in addition to the “classic” type, can be as follows:

1. Marker paint. Used for writing with a marker rather than chalk. Designed for people who do not want to wash chalk dust off their walls.
2. Magnetic or magnetic slate paint. Includes iron additives, therefore serves as a magnet.

Disadvantages of slate walls

• To reduce dust from chalk, you need to purchase special soft chalk;
• The wall must be wiped with a wet rag or sponge so that there are no streaks left.
• The ability to draw with chalk is not suitable for allergy sufferers.
• If you do not take care of the condition of the wall, it may look sloppy in the room.
• Slate boards are not used for finishing external walls. The material does not withstand large atmospheric changes. But this is a very subjective flaw.

Advantages and disadvantages of the material

Modern coatings have a minimum of disadvantages, but their advantages are undeniable. Slate type paints have the following advantages:

• create a very durable, hard coating that is practically not subject to wear, abrasion, or mechanical damage;
• are characterized by good adhesion (adhesion) to most known surfaces, even with smooth types of glass and ceramics, which increases the area of ​​operation;
• do not give shine, which allows you to draw with comfort and easily erase the inscriptions, wash the coating with water and detergents;
• do not pose a fire hazard, do not explode;
• due to environmental friendliness, they can be used in children's rooms and are odorless;
• easy to apply with your own hands, dry quickly;
• some paints include antiseptics, so they are used even in high humidity;
• The product can be used to cover an entire wall or highlight individual elements and use it to decorate surfaces with drawings;
• the material creates space for children's creativity; such decor can be located both in the children's room and in other parts of the apartment, even in the corridor;
• Paintwork is very functional: in addition to traditional use as a board, it can replace a kitchen apron, decorate a door, and update boring interior items.

If magnetic particles are added to the paint, the finished surface will muffle electromagnetic radiation from household appliances and electronics. This is a plus and a minus at the same time - harm to humans is reduced, but the quality of the Wi-Fi signal decreases. The disadvantages include that the product cannot withstand low temperatures, therefore it is only suitable for interior work.

Other possible disadvantages:

• if you do not wash the surface regularly, stains and stains will make the coating look sloppy;
• the slate material may soon become boring, so the repair will have to be redone;
• most often the paint is dark in color, which can make the room gloomy;
• the material is not suitable for a small room due to the visual reduction of space;
• slate coating is not suitable for a number of styles, for example, for classics; it will look best in loft and minimalist styles;
• It will not be possible to create the effect of a chalkboard on an uneven surface - you will have to very carefully level the base;
• the coating is so durable that drops can be wiped off only before it hardens, otherwise it will be difficult to remove defects;
• the price of the material is very high - some paints cost up to 8,000 rubles per liter jar.

For allergy sufferers, the constant presence of chalk dust can be harmful, so it is better to use marker paints and do not forget about wet care. Glass and aluminum will need to be pre-applied with a special primer to improve adhesion to the paint.

Advantages and disadvantages

Advantages of the material:

• Strength. The finished design cannot be washed off with water and is difficult to scratch.
• Safety. Does not emit harmful substances, suitable for arranging children's rooms.
• Easy to apply. Slate paint has excellent coverage; it is almost impossible to apply it poorly.
• Versatility. It can serve as both a basis for creativity in a nursery and a functional decor in an office.
• High adhesion. Apply to plastered, metal, glass, plasterboard, wood and other surfaces. Methods of application depend on the specific model and manufacturer.
• Variability. The palette is not limited to green and black; a large selection of colors and tinting options allow everyone to find paintwork materials to suit their design.

In addition to the advantages, there are some disadvantages:

• Difficult care. Due to the matte texture, it is difficult to wash the black coating clean. But chalk stains, especially in combination with lettering or drawings, have their own charm.
• Dark shade. Chalk or marker walls are usually dark - this is not appropriate in all rooms.
• Demanding requirements for the foundation. Dark matte paint will highlight all the flaws - so before painting you will have to bring the surface to perfection.
• High price. The price of 1 liter starts from 1,500 rubles - quite acceptable if you are going to decorate an apron for it, but not cheap for those who plan to decorate an entire wall.

Surface preparation and painting

To work with paint and varnish materials you do not need special knowledge or expensive tools. You need to buy a standard painter's kit: paint container, roller, brush. Despite careful application, difficult-to-remove drops may remain on the floor, so the coating should be covered with cellophane. Window sills, frames, doorways are covered with paper tape.

As a surface preparation measure, you need to carefully level the wall. Separating pieces of putty must be removed, old wallpaper must be removed, although smooth canvases can be painted on top after preliminary priming. If the wall is old, the ideal option is to completely remove the coating layer, perform leveling according to the standard scheme, and only then paint. The last layer is always a high-quality primer (regular, for the corresponding surface).

Painting a wall is quite simple. It is important that there is no dirt or dust on the base that could settle after priming. You need to mix the paint in a jar and pour it into a small container. Using a dampened roller or brush, carefully spread the material over the wall surface. After 2 hours, you can apply the second layer, and you can use the surface (drawing) after 3 days.

If necessary, a day after application, magnetic priming is additionally done with a composition containing iron powder. During the first month of operation, it is allowed to wash the wall only with water, and after that it is permissible to use not too aggressive household chemicals.

How to apply?

Using slate paint is as easy as shelling pears: just prepare the base correctly and take the right tools.

Tools and materials

Everything you need for work:

• a can of paint itself;
• stirring stick;
• cuvette;
• brush or roller.

Application with a roller is more accurate, so it is recommended to use it: choose foam rubber or velor with short pile.

Step-by-step instruction

1. Clean the surface from dust, degrease if necessary (glass, metal).
2. Protect areas that you don't want paint to touch with masking tape.
3. Prime the base.
4. Apply the first layer, after 2 hours - the second. Leave until completely dry.
5. Use the end of the chalk to go over the entire surface, wipe with a dry cloth: the slate surface is ready for use.

Video

See detailed application instructions:

Application of slate coating in the interior

The scope of application of the material is very wide. The product is popular in kindergartens and schools for covering walls in classrooms and corridors (in addition to the use of regular boards). Paint with a slate effect is used in cafes and offices (for attaching notes). The material is also in demand in apartments, especially in the kitchen and nursery. Some manufacturers claim that you can even glue wallpaper over this paint - the magnetic properties of the wall will be preserved.

Children's room design

By painting an entire wall or part of it under the lead, the child will receive an ideal coating for creativity and study. The kid will not feel the need to “paint” the wallpaper in the rest of the apartment, and the renovation will survive. Older children can use slate for homework, studying multiplication tables, formulas, and geometry.

Paint for the kitchen and hallway

Usually in the kitchen the entire walls are not painted. Separately painted interior items, elements and details will look better here. For example, you can make a slate kitchen apron, on which you can then write recipes, magnetize papers, and shopping lists. Some brands of paint indicate that the products change color when heated or exposed to hot grease, which must be taken into account when carrying out repairs.

In the kitchen you can decorate individual items:

• old refrigerator door;
• kitchen cabinet drawers and doors;
• table top;
• cups, jars;
• flowerpots;
• storage box;
• trays;
• tags for cans;
• boards;
• boxes with seedlings;
• big dishes.

If you create a slate area on the wall near the dining table, you can make meals more interesting, especially if there are children in the house. In the hallway, they usually paint the area next to the front door with stylus to leave reminders for each other.

Slate surface in a cafe

Slate paints and varnishes are often used to paint walls or individual stands in catering establishments. They are convenient to talk about existing promotions or invite visitors.

The “highlight” of the cafe’s interior will be an entire wall painted with this paint. The themes on it change depending on the season and events, which is convenient for advertising purposes.

What is a slate board?

A slate (chalk) board is a surface on which you can write or draw with chalk and chalk markers. The popularity of mixed styles and eclectic design notes has made this accessory suitable for a variety of interior styles: Scandinavian, modern, industrial.

Moreover: not only small chalk boards are relevant, judging by the photos of designer interiors, but also rather large slate surfaces.

Tray with slate function

Chalk board in kitchen

Kitchen apron for chalk drawing

Accent slate wall in the interior of the room

Idea for an accent wall in a small studio

DIY slate paint

Sometimes a full package of paint is too much. This material is usually sold in 0.5 - 1 liter cans or cylinders and is very expensive. To paint small interior parts, you can make your own paint.

First way

You should buy 250 g of acrylic paint and any cement mixture (dry powder), which will require 2 tablespoons. The components just need to be mixed, tinted with the desired pigment, and the paint is ready for use.

Unfortunately, cement-based paints scratch faster; a more reliable option is to add marble chips, which is technically more difficult. For tinting, it is better to choose a bright shade - purple, grassy, ​​deep blue.

Second way

According to this recipe for paint, you will need 3 tablespoons of acrylic paint and varnish (already tinted), a tablespoon of acrylic matte varnish, a tablespoon of cement putty and water. First, cement powder is poured into the container, then paint and varnish are added, stirred, and diluted with water. The paint is ready for use.

Variety of shapes

You can now write with chalk in your apartment wherever you want. The easiest option is to buy a magnetic board of an interesting shape for the refrigerator. For example, in the form of a music record for 1350 rubles. This is convenient for taking small notes.

In the same kitchen, a mug with a slate finish will amuse you at breakfast. But be more careful with the clock - there is too much temptation to erase these seven in the morning from the face of the earth!

Slate stickers are convenient for signing something temporary. For example, today there is buckwheat in this jar, and tomorrow there is rice? We erase and write again.

Regular square chalkboards in your office are ideal, providing plenty of space to make changes to your schedule or jot down a creative idea.

Slate boards are not only functional, but also decorative. Even just hanging a picture in a frame, drawn with chalk yourself, you will add an interesting detail to the interior. And if you paint the entire wall... However, this is a separate conversation.

Review of manufacturers

The choice of slate paint on the market is not very large compared to other coatings. You can only find material from well-known brands - Tikkurila, Obi, Castorama and others.

Tikkurila​

Tikkurila Liitu paint is produced in Finland and is of high quality. Available in two versions - black and white (for tinting). The surface of the coating is matte, chalk writes well on it.

Another paint of the brand - Tikkurila Magnetic - has a white color, is applied in 2 layers and allows you to obtain a magnetic surface.

Siberia

Paint Siberia (Siberia) made in Russia. The company specializes in the production of new types of coatings, including magnetic, marker, and slate paints.

The materials contain an antiseptic, have increased wear resistance and can be tinted in any color. Siberia PRO slate paint is sold in black and white colors.

MagPaint

Dutch Magpaint paints are a special line of slate paints. In recent years, marker paint of this brand has also appeared on the market. The demand for the products is high due to the highest quality of the material.

Magnetico

Magnetic paints of the brand (Germany) are produced in gray color. The performance characteristics are excellent, the price is lower than analogues.

Rust-oleum

In America, the company is a leader among manufacturers of such materials. Slate paints and varnishes are available in black and white colors; there are marker and magnetic compositions for decorating rooms.

Benjamin Moore & Co

The material is made in the USA. The manufacturer specializes in the production of premium quality paints and varnishes, which are tinted in a variety of colors. The finished coating has maximum resistance to damage.

Craft Premier

The paints are produced in Russia and contain only environmentally friendly components. Slate paints and varnishes are presented in small jars in black and brown colors. The coating will withstand up to 10,000 wipes with a rag.

Most slate-type paints are easy to apply, have good adhesion, and dry quickly. The products give the room an original look, which is why they are in demand among designers and consumers.

Brief overview of existing options on the market

a large selection of magnetic paint on the construction market . You can choose the right one for yourself. Here are a few options as advice.

Tikkurila Magnetic

Chalkboard magnetic paint with blackboard effect from ] Tikkuril[/anchor].

This type of paint is often used in educational institutions. Not only for walls, which can become a new analogue solution, replacing the outdated blackboard. It is also an effective material for restoring the coating of old boards .

The main advantage of this global brand is its high wear resistance. The manufacturer guarantees that after complete drying, the magnetic primer will withstand up to 5 thousand wires with a brush . The surface is also easy to clean without damaging the coating.

It is necessary to apply the paint in several layers to get a good result.

Don’t forget that it needs to be diluted , otherwise the thickness will increase paint consumption; even when finishing, you should use a special short-haired roller to avoid overuse.

It is important to apply paint to a perfectly smooth wall surface, this way you will avoid possible defects and significantly save on the amount of paint.

Magpaint

One of the latest brands on the Russian market is Magpaint. Judging by the reviews of those who have tested this magnetic paint, they are mostly positive. Even professionals noted the quality of this type of magnetic coating.

Judging by the consumption, 1 liter of paint is enough for 2 m2 ; it must be applied in three layers to get a good result.

A special feature of this magnetic coating is the ability to be located even on the most difficult surfaces:

• Drywall;
• Tree;
• Plastic;
• Metal.

Siberia

Inexpensive version of slate paint with a metallic effect siberia. If you cover the selected area with this paint, then after drying the surface will withstand drawing not only with ordinary chalk, but also with slate chalk.

The main advantage of this type of magnetic paint is the highest level of durability , up to 10 thousand brush treatments.

But that’s not all, it’s worth mentioning a special ingredient in the paint that protects against the development of fungus .

Therefore, this paint is ideal even for damp rooms like the kitchen. An excellent solution for covering external walls.

Whatever type of magnetic paint you choose before work, read the instructions for use to avoid overuse and possible defects.