A table is an important detail in the interior of an apartment or house. Such a purchase is made with the expectation of more than one year, carefully selecting the surface of the furniture to match the color scheme of the room. To protect the covering from external influences, the table is usually covered with a tablecloth or colored oilcloth. Transparent film on the table is a new modern way to preserve an ideal surface.
Features and characteristics of transparent film for the table
“Liquid glass” is a durable film for table protection, made using modern technologies from polyvinyl chloride.
It gained its popularity due to its advantages:
- remains almost invisible, without covering the color and design;
- a transparent film on the table will protect it from exposure to ultraviolet rays, moisture and household chemicals;
- it is heat-resistant and does not deform from high temperatures.
- “liquid glass” is suitable not only for the kitchen, but also for the office. It will protect the work surface from scratches.
- You can attach photographs, phone numbers, and necessary documents under a transparent thick film.
Transparent film on the table: before and after pasting
PVC material from which soft glass is made:
- hypoallergenic;
- flame retardant;
- wear-resistant;
- withstands low temperatures, up to – 15 degrees.
The thickness of the silicone film for the table is only 2-3 mm, the service life is 5 years.
When folding and transporting, no creases or cracks form on the silicone film. An unpacked tablecloth easily takes on its original appearance.
What type of oilcloth should I choose for my kitchen?
First of all, like any finish, oilcloth has advantages and disadvantages.
Pros and cons of coverage
The material is not at all afraid of water.
Advantages of oilcloth:
- The material is 100% moisture resistant.
- The coating is moderately heat-resistant. Therefore, it can be used to decorate walls, cover a kitchen apron, or cover a dining table or work table.
- Oilcloth does not absorb grease and dirt. Thanks to this, it can be easily washed with a regular soap solution.
- There is a huge selection of oilcloths in color and pattern. Therefore, this finish can be matched to any kitchen interior.
- The coating protects the base well from mechanical loads.
- This finish is very cheap. At the same time, it can be quickly and easily replaced with a new cladding.
The design of oilcloths is very diverse.
Disadvantages of coverage:
- When using oilcloth for walls, you should take into account that there is a danger of mold growing underneath it, because it is vapor-tight.
- With intense exposure to steam and moisture, the paint layer on the finish wears off quite quickly (2-5 years).
Which coating should you choose?
The best base for covering is a non-woven fabric.
The oilcloth base can be:
- paper web;
- matter;
- non-woven fabric.
A protective layer of polymers or other materials is applied to it. This coating gives the material wear and moisture resistance, resistance to mechanical and chemical influences.
Oilcloth coating on non-woven fabric is the most durable. Because of this, its cost is higher than its analogues on a paper backing.
Based on the material of the front layer, there are the following types of oilcloth:
| Photo | Type of coverage |
| Oilcloths made of polyvinyl chloride, polyethylene and polystyrene |
These polymers give the material a high level of strength and wear resistance.
This coating can be used for any base, even glass tables.
The main disadvantage of finishing made of polyvinyl chloride and polystyrene is that at the beginning of use it can have a strong and unpleasant smell.
They are most often used as tablecloths for kitchen and dining tables.
Teflon gives the coating moisture, wear and heat resistance. When handled with care, this material lasts a very long time.
This material is often transparent or decorated with different patterns.
This coating is dense and wear-resistant. Its aesthetic appearance makes it possible to place it on a glass table.
Transparent oilcloth on the kitchen table is not ideal:
- You can’t cut food on silicone, as it can be damaged;
- the material is not thermally stable enough.
It is made from vegetable oils, most often drying oils. Painting primers are produced from it.
These compositions are applied to an ironed woven base in 4-5 layers. Then they are fixed with a special varnish.
Oil oilcloths are wear-resistant and durable.
Cover design
When choosing oilcloth, you need to take into account the features and interior of the room:
- The texture of the coating can be glossy or matte. The best option for the kitchen is a glossy material; it will be easier to clean.
- Oilcloth in color should not sharply contrast with the rest of the cladding, decoration and furniture in the kitchen. The tones of the decoration should be combined with the design of the room itself.
- When the room is decorated in cool colors (blue, light green, white, etc.), then the oilcloth should be chosen in cool colors.
- For a warm (orange, yellow, red) room, buy light finishes or warming shades.
For the kitchen, decoration with ornaments and patterns in patchwork, rustic, and country styles is ideal. These could be fantasies on the theme of summer, images of kitchen items, fruits, flowers or vegetables. They will symbolize the wealth and abundance of the home.
- Nowadays, holographic 3D drawings are becoming increasingly widespread. A coating with such a front layer will help to recreate the unusual design of the kitchen.
- Soft oilcloth with an embossed texture and bright patterns will add luxury to the coating.
- If the kitchen windows face north, the colors of the cladding should be warm. The southern room should be decorated in cool colors.
Oilcloth design, well suited for the kitchen area.
Advantages and disadvantages of the material
Advantages of liquid glass film for the table:
- Ease of removing contaminants that are removed from the surface without the use of cleaning agents and detergents.
- Easy to care for the product.
- Invisibility - a transparent thick film is invisible on the table and does not violate the integrity of the interior of the room;
- Durability - silicone material can serve as a coating for several years.
- No smell.
- Stability on the surface - the silicone tablecloth does not slip or move from the tabletop.
The tablecloth-film on the table also has minor drawbacks.
1) It is not resistant to direct fire. If cigarette ash or a burning match gets on the tablecloth, a stain will remain on it.
2) Silicone is damaged by a knife, so it is necessary to cut products on a special board.
3) If not laid correctly, bubbles will form under the tablecloth.
Pasting walls with oilcloth
How to glue oilcloth to walls? There's nothing complicated about it.
Preparing the base
Please note that if a repeating pattern is applied to the oilcloth, then the coating should be purchased with a 10% margin. After all, the drawing will have to be adjusted.
- Preparing the base. You need to completely remove the old finish from it - paint, whitewash, wallpaper, etc. Then the walls are cleaned of dust and dirt. After this, it is advisable to cover them with antiseptic primer.
- Purchase of materials. Buy the required amount of oilcloth and adhesive from a hardware store. If the finish is not self-adhesive, then Bustilat or PVA are best suited for fixing it.
Old paint from the walls must be removed.
Wall decoration in 6 steps
| Teflon oilcloths | |
| Silicone coating | |
| Oil coating | |
| Photo | Instructions |
| Step 1. Preparing the glue |
This is done according to the instructions on its packaging.
PVA and Bustilat are diluted with clean cold water to the desired consistency.
Thanks to this, their excess can be easily removed with a damp sponge or cloth.
It is cut with scissors into panels of the required size.
At the same time, do not forget about adjusting the ornament on the material.
It is carefully and without gaps applied to the panels. Otherwise, the coating may begin to bubble.
The composition is applied with a brush or roller.
The walls also need to be coated with a fixative.
This work should begin from one of the corners.
The oilcloth is glued to the base, just like wallpaper. It presses tightly to the surface.
Then it is smoothed with a roller from the middle to the edges. This squeezes out excess air under the coating.
They are glued with a slight overlap (up to 3-4 mm) on the previous one. Do not forget to carefully combine the ornament.
The seams between the panels must be rolled well with a roller so that they do not open.
When bubbles appear on the coating after the glue has dried, they should be pierced with a sharp knife.
Then glue is injected under the problem area with a syringe and it is smoothed out with a roller.
Silicone table pads
Types of soft glass tablecloths:
- The bulk of silicone pads are available in a colorless version.
- There are silicone tablecloths for tables with a pattern, which allows you to give the room a more original look. Any design is applied to the film on the inside, which guarantees a long service life. Most often, images of fruits, berries, flowers and intricate geometric shapes are used.
Transparent silicone pad with a pattern
- Buyers have the opportunity to purchase a matte film; it looks quite unusual on the countertop and does not interfere with the overall interior.
Matte silicone pad us tol Ikea
For the convenience of using thick film, you can attach special corner silicone pads to the corners of the table. They additionally prevent premature damage to furniture.
Corner pads will be useful for families with small children; they will prevent injuries from sharp corners.
Corner silicone table pad
Tabletop requirements
The countertop in the kitchen experiences daily stress and at the same time remains reliable and beautiful for years, looking no worse than other, less popular furniture. Table surfaces have to deal with spilled liquids, accidental knife blows and other mechanical impacts, but they should not lose their original appearance. The right coating will help you cope with different tasks. He must meet the following requirements:
- the surface must have water-repellent properties;
- do not react to aggressive household chemicals;
- guarantee strength, durability and resistance to mechanical stress;
- the presence of heat-resistant indicators will allow you to place hot dishes the table
- the tabletop should not fade or change color over time;
- It is important for the coating to have an attractive appearance and match the style of the kitchen;
- You should choose a covering material that is easy to maintain; for example, loose surfaces can accumulate pathogenic microbes in recesses; in such cases, it is better to give preference to a smooth base.
Oil and paint coatings
There are two types of such coatings: oil and wax based, using paints and varnish. At home, the worn surface is cleaned of the old finish, then sanded and a protective layer is applied again.
How to stick a protective film on a table without bubbles. Film installation. Flexible glass.
The countertop will be reliably protected by industrial oils: citrus, tung, linseed. Two or more layers should be applied to the surface, each of them must dry thoroughly before subsequent application. These are environmentally friendly compounds, they do not have toxic odors or fumes, are able to repel water, and protect the surface from scratches.
Paints and varnishes also do a good job of restoring and renewing wooden countertops. They are resistant to high temperatures, which means hot cups of tea will not leave marks on the table.
For which table surfaces is transparent film suitable?
Silicone film is suitable for almost any type of countertop, provided that it has a smooth surface.
Below are the most common use cases.
- Film for a glass table is the best option, as it will protect it from chips, cracks and scratches and will be almost invisible.
- A transparent film on a metal or wooden table is also a good solution. Its thick surface protects furniture from getting grease, dyes and getting wet.
- A thick transparent film is also suitable for a plastic table in a children's room. The transparent surface will protect the furniture from paint and plasticine while the child is studying.
- Covering a marble table with film is a bold decision, but thanks to it, excess moisture will not penetrate into the stone surface.
Conclusion
Oilcloth will be the best choice if you need to quickly and inexpensively cover your kitchen walls. This coating is moisture-resistant, wear-resistant, and has moderate heat resistance.
Watch the video in this article. It contains a lot of additional information. If you have any questions, voice them in the comments.
Therefore, I say goodbye and success to you in your endeavors.
We choose a protective covering for the table with benefit.
In a modern interior, all elements must be in harmony. At the same time, it is important to ensure the safety of expensive furniture and glass surfaces, especially if there are children and pets in the house. If earlier the choice of coatings was small, mostly oilcloths with different patterns, now the situation has changed.
An option in which you can combine both a tablecloth and a table protector, and also fit into the interior - this is a silicone transparent coating that will last for many years. see here: https://fokus-groupp.ru/g21313081-silikonovaya-zaschitnaya-skatert
Recommendation! For kitchen tables, purchase a cloth with a thickness of at least 2-3 mm.
It is suitable for any smooth surfaces, is easy to apply and can be removed if necessary. It is often purchased to preserve tabletops and glass tables in their original form. It not only increases strength, but also reduces the likelihood of scratches, chips, and cracks. If you manage to break the glass, its fragments will not scatter throughout the room. Thanks to this, caring parents buy such a tablecloth to create maximum safety for their children.
As you can see, silicone film has wide applications. It is purchased for home and office. The material can withstand intensive use.
| Step 2. Cut out the oilcloth |
| Step 3. Applying glue |
| Step 4. Gluing the first panel |
| Step 5. Installation of subsequent panels |
| Step 6. Eliminate defects |
How to lay film on a glass table
The overlay is laid on the surface without any particular difficulties, but it requires following a special algorithm:
- Before covering the table with film, it is wiped from dirt and dust so that the stains are absolutely invisible.
- Then the “soft glass” is spread on the surface and pressed against it with both hands.
- If bubbles have formed under the cover, the “liquid glass” should be carefully lifted, spray the surface with water from a spray bottle, and press again. This method of installation will allow air to escape along with water, and the magnetic film will be leveled on the table.
Why yellow?
For a person who does not have vision problems, any saturated color is noticeable: blue, green, red, orange. If vision is poor, then the most visible color is yellow. This shade is noticed by people even with very poor eyesight. In addition, it is visible further than other colors, which is why many signal signs on the roads are made in this color.
READ Converting a 12 Volt Screwdriver to 220
Burning thread
We soak the thread in a flammable liquid and fix it on the glass along the cutting line. We set it on fire, wait for it to burn completely and immediately place it in cold water or pour it onto the heating site. The main thing is that the glass cools down as quickly as possible and bursts due to temperature changes. A characteristic click will signal the success of the work done. If the glass does not crack, you can try repeating the operation.
This method breaks bottles fairly smoothly, but does not always work with large glass sizes. It is also very fire hazardous and requires a fire extinguisher or a container of water on hand, which is already required.
How to care for the product
“Liquid glass” requires simple care. It should be wiped with a damp microfiber cloth or soft cloth.
Fleecy fabric is not suitable for caring for the surface of the tablecloth; it will leave marks. It is not recommended to use powders and products containing alkali, chlorine and acid for cleaning. Their use will significantly reduce the life of the tablecloth.
To remove an old grease stain on an adhesive film on the table, you need to apply a small amount of dishwashing detergent to it and leave it for a few minutes. Then the surface is wiped with a soft cloth.
Choice
When choosing a covering for a kitchen table, not only personal preferences play an important role, but also the countertop itself, as well as the design of the kitchen. No one will cover an expensive stone base with self-adhesive.
When working with wood yourself, creating a new countertop or reconstructing an old one, you can choose oil-wax compounds to protect it. They will protect the wood from moisture, high temperatures and scratches. Today, paint and varnish coatings are inferior in popularity to oil-based compositions.
For a quick reconstruction of a table, a self-adhesive film, matched to the kitchen decor, is suitable. A large selection of designs and color palettes will not make it difficult to make the right decision.
Those who want to create a masterpiece in the kitchen with their own hands can fill the countertop with liquid glass. Such a choice can realize any flight of fancy. Everything is poured - wood, shells, sea pebbles, herbarium, branches. Glass can be tinted and made into different structures.
Those who don’t want to put a lot of effort into it, but want to preserve the tabletop they just purchased, can use PVC film. Soft glass will provide reliable protective service.
The most famous manufacturer of table film in the world is the Japanese company Meiwa . They provide clear, colored, matte overlays to the market. , both in large rolls and in standard tabletop sizes.
In terms of their positive qualities, glass table films from domestic manufacturers do not lag behind Japanese ones. Decosave and Modern companies produce both transparent overlays and tablecloths in various shades and patterns, which allows you to match them to any interior.
The best company in Belarus producing transparent thick film for the table is considered to be “Ofiston” . Their transparent tablecloths have gained popularity among customers, which indicates the high quality of the product.
Everyone has probably heard about the Swiss company Ikea. The quality of this company's products is evidenced by many positive reviews. The models of table films that are most quickly leaving the shelves of the Ikea store are the transparent “Preuss” and “Skrutt” .
The following companies are also successful in selling silicone tablecloths:
- Durable;
- Esselte;
- Leitz.
Main manufacturers
Information about the main manufacturers is presented below.
Which table is it suitable for?
Protective film is suitable for all types of tables, but is especially relevant for glass and lacquered ones. The tablecloth protects the kitchen table from cuts, the desk from rubbing, and the dining table from accidental stains.
It can also be any table :
- rectangular;
- square;
- round;
- oval;
- non-standard shape.
Tip On a rough surface (for example, unpolished wood or textured PVC film), flexible glass will constantly slide. To hold it, you will have to use gentle glue.
Flexible glass on the table
How much does soft glass cost?
The cost of silicone film for the table depends on the size. Below are approximate price categories:
- 70*60 cm = 1000 rubles
- 140*60 cm = 1500 rubles
- 140*80 cm = 1900 rubles
- 140*100 cm = 2200 rubles.
When purchasing a new table for your home, you can choose the most beautiful options. Don't be afraid to experiment with colors and materials, don't be afraid to buy glass furniture. The transparent overlay will extend its use for quite a long time.
General description of the tablecloth
The kitchen and dining room in a house or apartment must be in perfect order. This is due to the fact that food is prepared and eaten in these rooms. This places high demands on furniture and interior items located in them.
To protect the tabletop, housewives use various tablecloths made from different fabrics or oilcloth. But, as experience shows, sometimes they can be ineffective. However, progress is constantly evolving and offering consumers new materials. To protect the tabletop, transparent or translucent glass tablecloths began to be used. They are practical, multifunctional, and can be used in any interior.
The use of such coatings will ensure complete protection of the countertops from mechanical damage, contact with liquids, grease and oil. The presence of the film prevents them from being absorbed into the countertop.
Tablecloths are practical, multifunctional, and can be used in any interior.
Potassium or sodium? What is the difference?
The composition and characteristics of these types of watery glass are different, therefore the area of application also differs:
- Sodium liquid glass improves the quality of adhesive compositions, has the highest astringent, waterproofing, disinfectant, fire-resistant, and protective properties, therefore it is widely used as a strengthening and water-repellent additive in concrete.
- Potassium liquid glass is acid-resistant and perfectly resistant to atmospheric influences. It is added to paints and varnishes; silicate paints are also produced, which have water-repellent and disinfectant properties. Potassium liquid glass is slightly more expensive than sodium glass.
Adding watery glass to concrete mortar
Liquid glass is added directly to the concrete solution to impart water-repellent and disinfectant properties, accelerate hardening and increase the strength of finished concrete products.
Typically less than 3% water glass by weight of concrete is added; a higher concentration (up to 25%) is used for mixing repair and grout mixtures. Pouring concrete with a huge amount of watery glass leads to brittleness of the finished concrete products.
When 2% watery glass is added to a concrete solution, concrete begins to set within 45 minutes, and hardening within a day.
Coating options
As we have already found out, in order for a tabletop to serve for a long time, it must be durable, reliable, and have a heat-resistant and water-repellent surface. Industrial models made of metal and artificial stone meet these requirements. It is more difficult to protect wood or products made from chipboard, MDF. They are laminated, covered with PVC film, plastic, paints and liquid glass.
Sources:
https://berkem.ru/tekstil/zashhitnaya-skatert-dlya-stola-myagkoe-steklo/ https://mirtentov.ru/category_111.html https://stol-mos.ru/instrukciya https://mirtentov. ru/articles/kak_pravilno_obrezat_gibkoe_steklo_po_forme_stola/ https://vplate.ru/kuhnya/mebel/stoly/pokrytie/
