Water-based ceiling paint - the right choice

New materials and methods of ceiling finishing are constantly appearing on the building materials market. But, nevertheless, many still prefer to use paint for ceilings. "Which is better?" - you will get the answer to this question after reading this article.

The range of paints sold in stores is very wide. There are even more manufacturers advertising their products. It is very difficult to understand this issue on your own, because each product has its own characteristics.

And bright labels and significant price variations only make it difficult to choose. Therefore, first you need to understand what types and varieties of paints exist.

But first of all, you need to decide on the visual effect that you expect from painting the ceiling.

Mineral paints

Slaked lime or cement is used to create this type of paint. Their main advantage is their low price. As a rule, they are used for painting concrete and brick surfaces. They are not very durable and are often used when treating ceilings in non-residential premises. The quality of painting work is not critical for this material; it is a good choice of ceiling paint in cases where you need to paint rooms with a large ceiling area.

Three groups of paints according to the effect produced

Glossy

Pros: They form a smooth, durable finish that is easy to maintain. To remove dirt, just use a damp sponge. Glossy paints are very durable. And the higher the gloss level, the more wear-resistant the ceiling paint is. Glossy paint usually has lower consumption, so its cost is quite justified.

Cons: as you know, this group of paints is very shiny, which means that all irregularities look more noticeable on it. Therefore, before using it, you need to carefully putty and level the ceiling.

Matte

Pros: thanks to these paints you can get a good even coating and also hide all ceiling defects. In addition, matte products do not distract attention from other elements of the interior, unlike glossy ones.

Cons: they are less durable, so they are not recommended to be washed frequently.

Semi-matte or semi-gloss

Pros: They are characterized by a lower degree of shine compared to glossy ones, however, they are perfect for rooms that require a coating that can resist wear and dirt.

There are no disadvantages.

Acrylic paints

Water-based acrylic resin emulsion. Water-based acrylic ceiling paint is beautiful and durable. When painting a ceiling with acrylic paint, you must follow certain rules. The fact is that it is absolutely impenetrable to gases, including water vapor. Therefore, paint must be applied only to completely dry plaster. It usually takes a month to dry after plastering the surface.

Acrylic paints with the addition of latex are popular.

The advantages of this material include:

• increased moisture resistance (this is a washable coating);
• resistance to mechanical damage;
• no odor;
• quick drying after application.

Difficult choice

Selecting the optimal suspension among the huge variety of proposals that exist today for a person who has encountered this problem for the first time is not so easy. Let's start with those least suitable for use inside a building.

Toxic

Silk latex is divided into silk and silky matte categories. Silk-gloss latex paint gives the paint an effective shine and highlights the surface structure, which can lead to beautiful effects. However, silk gloss latex paints also highlight corrections and irregularities in the wall. In addition, the gloss of a color is associated not only with optical properties, but also with functional properties. Glossy latex paints are the most durable. They are especially easy to clean, but require handling most often during sweeping.

In other respects, they differ depending on the polymers used for binding:

1. Polyvinyl acetate
   . The most important advantage of an emulsion in which PVA is the binding agent is its low price. But when you save on one thing, you always have to lose on something else.

So here, low cost and fairly good strength are overshadowed by the following disadvantages:

They should at least be rough to apply the new dispersion color if they are not removed. The silky gloss grade for latex paints is not as durable. To do this, it smoothes out wall impacts better and allows for better dispersion of color dispersion.

The disadvantage of latex dispersion paints compared to wall paints with real latex is that their quality is very dependent on the manufacturer and there are no natural binders, but synthetic resins are used. The disadvantage of latex dispersion paints compared to conventional wall paints is that they are less breathable and must be treated before a new coat of paint depending on the gloss and wet abrasion grade. They can be used more flexibly than real latex paints and are much more durable than regular colors.

• Hydrophobicity. Use in rooms with excessive humidity is contraindicated. As well as strict requirements for the absolute dryness of the surface being treated, which is sometimes very difficult to achieve.
• Small assortment of colors. They are limited to pale matte shades. It should also be noted that usually these compositions are sold in white form, and they are given color by adding special pigments with your own hands. The use of tinting machines for this process is not possible, and therefore mixing is also carried out manually.

Plastic painting is one of those basics that almost everything we have resorted to for a while, and although it is a well-known product, it continues to raise a lot of doubts. The most common ones are usually plastic paint is better and why, how does cheap plastic paint differ from the rest, where to buy plastic paint and what makes it different from the other.

Since we know these questions haunt you in more ways than one, we've prepared this post with everything you need to know to buy interior plastic paint. Stay here if you are interested and find out which one suits your needs!

1. Polyacrylates
   . Acrylic emulsion is the best paint for walls in terms of price and quality.

The polymer film remaining after the evaporation of water has a lot of undeniable advantages:

• Moisture resistance. This is a good paint for walls even in damp rooms such as a bathroom, basement or kitchen.

Paint is generally a product in liquid form that is applied to a surface in a thin layer, forming a film that covers, protects and beautifies the support to which it has been applied. There are different types of paintings and, roughly speaking, we can classify them into two groups: solvent paint and water paint. Plastic paint belongs to the group of water-based paints and is most often used in decoration.

It can be vinyl or acrylic depending on the resin used, and you can find three finishes: matte, satin and gloss. There are plastic paints for indoor and outdoor use, with different characteristics for each environment.

• Wide range of possible color solutions. A nice addition in this regard is the ability to create new unique shades using tinting equipment.

• Wear resistance. It is not afraid of frequent contacts with furniture and hands, while maintaining the integrity of the coating.
• Simple instructions for use. In order to dilute the mixture with water and apply it with a roller to the wall, no special skills are required. Moreover, it lays down smoothly and without streaks.

Main characteristics of plastic paint

Its main application is on both plaster and cement walls and ceilings, but it can also be applied to other surfaces if they have previously been prepared with primers and sealants.
Plastic painting is one of the great queens in the world of painting and decoration. Many of these are its advantages, mainly its ease of application and cleaning. Plastic paint is a water-based base material, so you won't need any solvent to thin this paint before applying it, or to clean the utensils and tools you use in your work.

• Frost resistance. Withstands up to -30 degrees Celsius. Which allows for use in facade work.

Advice: but no water-based emulsion should be stored at subzero temperatures. Since the water present in the composition then crystallizes, destroying the positive qualities of the paint.

"Expert" - excellent white paint for ceilings

On the other hand, most plastic paints are washable, meaning we can lay fabric over it to eliminate possible staining and rubbing. But this is not true in everything, we need the paintings to have qualities to withstand friction. If parts are white plastic paint you can get other colors using dyes. Whether you can get the tone you want will also depend on the quality of the dye, since if it is not, you will need a larger dose of dye.

• No unpleasant odors. This wall paint is environmentally friendly, like all water-dispersed emulsions. Can be used in children's rooms and places where allergy sufferers live.

• Immunity to ultraviolet radiation. Color saturation is maintained for many years.
• Ease of care. The ability to carry out wet cleaning using household chemicals allows you to get rid of any stains at any time.
• Vapor permeability. Allows the wall material to “breathe”.
• Long service life. With proper use it can last up to ten years.

1. Vinyl
   . Vinyl wall paint is more expensive than acrylic paint, but it also surpasses its characteristics, creating an even more durable and reliable thin-film coating.

Additional benefits:

It is diluted with water, so we do not need any solvent to dilute it. If you decide to paint with plastic paint and you decide to change the color in the future, you should know that it is very easy to repaint on this type of material. It does not emit strong odors and produces less fumes than other paints, such as solvent-based ones.

• It dries quickly, allowing us to finish our painting early.
• It has good adhesion and usually does not crack.
• It is wash resistant depending on the quality and quick drying.
• It can be painted.
• The color scheme is endless.

Manufacturers have launched various types of plastic interior paint in the market with truly amazing features.

• Short hardening time of about four hours. This allows you to move quickly to the next stage of repair work.
• The strongest moisture-proofing qualities. They reliably protect the most hydrophobic materials from any level of dampness and even direct ingress of water.
• Resistance to alkaline influences. In combination with the previous parameter, it can withstand frequent use of detergents. Which is very popular in offices, cafes, shops and other public places.

Currently, you can find eco-interior plastic paint on the market for floral perfume plastic paint, anti-radiation plastic paint, resin monolayer paint, anti-mildew plastic paint or zero-emission plastic paint, among others.

Which plastic paint should I buy?

If you're wondering which plastic paint to buy, the answers are simple: the one that's best suited for the job you'll be doing. But of course, that statement didn't tell you much, right? Don't worry, we will give you more tips.

• Ability to hide minor defects of the treated surface.

Thus, we can conclude that vinyl suspensions lead the rating of wall paints, surpassing all other types of water-dispersed solutions in strength and reliability. But acrylic ones are more often used, due to their more affordable cost.

Just for quality. It is important to note that on the one hand there will be a price per liter of paint, and on the other - a price per square meter. These are two different data. You can buy a painting with a price per liter lower than another, but perhaps you need to give more hands to be good, so the price per square meter is multiplied.

High quality at an affordable price - paints from Sniezka JSC

There are very poor quality plastic interior paints and excellent quality paints depending on various factors such as their resistance to abrasion or their hiding power. This is all determined by aspects such as the amount of vinyl or acrylic resins contained in the paint, which is what gives it its hardness and strength.

Glossy or matte

Another point to pay attention to is the choice between matte and glossy suspensions. The fact is that the former wash better and are more practical, while the latter have a more presentable, shiny appearance.

Silicone paints

The highest quality type of paint with many advantages. Dries even on wet plaster without forming bubbles. The painted ceiling can be washed, including with a brush and detergents. Suitable for rooms with high humidity. You can even paint the ceiling in the sauna - the coating will stick. This material successfully masks cracks and other surface defects up to 2 mm in size, which means that in many cases it allows you to do without putty.

Popular paint manufacturers

The modern building materials market offers a large number of acrylic, water-based, silicone and latex paints from different manufacturers. Below is the TOP 10 popular brands. The products of each of them have a number of advantages and disadvantages. The choice of a specific type of paint depends on personal preferences, financial capabilities and the desired result.

Water-based paint Caparol

When deciding to use Caparol paint for ceiling finishing, the owner is making the right choice, because this German manufacturer offers the best quality products among other popular brands.

The company offers water-based environmentally friendly paints for painting ceilings. They fit perfectly, have high abrasion resistance, tolerate direct sunlight, and do not contain plasticizers or solvents.

The Caparol company offers customers a huge selection of paints and varnishes of various colors and structures

After painting the ceiling with Caparol water-based paint, you get a smooth matte surface from which any dirt can be easily removed. This type of material is perfect for any ceiling surface: wood, concrete, plasterboard, etc. A ceiling painted with Caparol paint will last a long time, and there is no need to repaint it every year. This allows you to save money.

The main disadvantage of this brand is the high cost of the products.

Related article:

Fabric stretch ceilings. Pros and cons, photos of finished structures

Pros and cons of suspended ceilings made of fabric. Photos of options. Types of ceiling fabrics, features of care and installation.

Ceiling paint Tikkurila

The Finnish brand Tikkurila offers a large number of different high quality paints. They can be used to work with any surface; they fit perfectly on drywall, wood, plaster, etc.

Paint from Tikkurila is a leader in the market of paints and varnishes due to its high quality standards and ease of application

The components that make up the paints make it possible to obtain a thin, smooth and even surface. Due to its high coverage, this brand of paint can be applied in 1-2 layers. It contains a special antibacterial component that prevents the development of mold. Therefore, the paint is great for the ceiling in the kitchen or bathroom.

The finished surface is matte and is distinguished by its brightness and richness of color. The manufacturing company offers a wide range of color solutions, thanks to which Tikkurila paint is considered the optimal solution when decorating non-standard interiors.

After application, the surface dries within two hours. The paint does not have a strong odor, it is great for a bedroom or children's room.

With all the advantages, Tikkurila paints have one significant drawback - high cost. However, the duration of operation without additional painting compensates for the costs spent on purchasing this material.

Sniezka paint is a budget-friendly, high-quality and quite popular option for ceiling finishing.

Sniezka: the best paint for the ceiling

The Sniezka brand has existed on the construction market for more than 20 years. For painting ceilings, the company offers environmentally friendly paint with hypoallergenic properties. After applying it to the ceiling, after two hours you get a smooth matte surface. She is not afraid of exposure to moisture and direct sunlight.

A ceiling painted with this paint has a smooth, beautiful surface on which dirt and dust do not linger. If necessary, it can be easily cleaned with a damp sponge. The ceiling painted with Sniezka is resistant to temperature changes and has good vapor-tight properties.

Note! As standard, the paint is offered by the manufacturer in white; to obtain a different shade, you need to add a colorant.

With the help of Sniezka products, it is easy to whitewash the ceiling with your own hands - water-based paints of this brand are easy to apply.

Dulux ceiling paint

The British company Dulux offers a large selection of paints for ceiling finishing: acrylic, latex and water-based. All of them are of high quality and good adhesive properties. They are based on water and alkyd resins.

Thanks to the antibacterial properties of paint from the British company Dulux, mold and mildew will not appear on the ceiling

Dulux ceiling paint has good coverage; when applied to the surface, small cracks and potholes are healed. The result is a smooth, even surface.

Note! The paint does not have a strong odor and tolerates moisture well, so it can be used to decorate the kitchen, bathroom and corridor.

The material is expensive, but its long service life will save money on frequent cosmetic repairs.

For children's rooms, the company produces a special water-based ceiling paint, the price of which is higher than that of the rest of the range. This is due to the presence of silver ions in the material. This enhances the antibacterial properties of the paint and prevents mold.

Acrylic and water-based paint Dufa

The German manufacturer Dufa is deservedly considered one of the best in the modern construction market. Among the series of ceiling paints produced by the company, acrylic and water-based types should be distinguished. These paints have good coverage, are easy to apply, and have a high drying speed. This results in a smooth matte surface.

If you need to quickly paint the ceiling, it is better to use paint from the Dufa brand, which does not have a strong odor and dries in a couple of hours

If it is necessary to remove water-based paint from the ceiling, as a rule, a simple soap solution is sufficient.

A ceiling painted with Dufa paint is not afraid of exposure to moisture and sun, so you can safely do wet cleaning as many times as necessary. At the same time, the appearance of the ceiling will remain the same.

The paint from this company can be used in any room. The only drawback of this product is its high cost. This makes it less accessible than products from other manufacturers.

Tex: Great ceiling paint

When choosing paint for the ceiling, you should carefully study the offers of the Tex company. The use of this material allows not only to solve the problem of how to whiten a ceiling with water-based paint without streaks, but also to prevent the formation of mold. This is due to the presence of antibacterial components in the composition.

When using Tex paint, it is worth considering that it must be applied in several layers to achieve a perfectly white ceiling

The disadvantages of Tex products include low coverage. To get an even, smooth surface, you need to apply 2-3 layers of paint. This increases its consumption and purchase costs, but after painting you get an ideal surface on which no traces of a brush or roller are visible. The paint does not have a strong unpleasant odor and is inexpensive.

Note! A ceiling painted with Tex paint does not withstand frequent washing, so this material is not suitable for the kitchen.

Alpina: combination of price and quality

This brand offers high-quality and affordable products. Alpina ceiling paint allows you to get a smooth and even surface, subject to careful preliminary preparation. Otherwise, all surface imperfections will be visible. The paint adheres well, it does not have a pronounced unpleasant odor, and it dries quickly. This paint can be used throughout the apartment, and it perfectly solves the question of what paint to choose for a concrete ceiling.

A significant disadvantage is the low abrasion resistance, which is why it is impossible to carry out frequent wet cleaning of ceilings painted with this paint. In addition, it is necessary to correctly decide the question of which roller to paint the ceiling with water-based paint. An unsuccessful choice of tool will lead to a sad result.

It is better to use paints from Alpina in the bedroom, hallway, and living room, since it is not recommended to wet clean such a coating

Alpina paints combine affordable prices and high quality. However, they should not be used for rooms with high humidity.

Marshall water-based paint

Marshall's ceiling trim products are not as popular as all other brands. This is due to the fact that the manufacturer is more focused on products for painting walls.

The company offered its series of compositions for performing work on surface decoration, which, among other things, can be used for painting the ceiling over whitewash. Both water-based paint and latex type of material are offered by the manufacturer in white. If necessary, a colorant is used to obtain the desired shade.

The paint itself does not have a strong odor, dries quickly and has good adhesion. It is well suited for wet cleaning. However, this is often not worth doing, otherwise the ceiling will lose its previous appearance. It is worth noting that the work requires careful preliminary preparation of the ceiling for painting with water-based paint.

In order to get the best result, before finishing the ceiling with Marshall paint, you should carefully prime the surface

Textured ceiling paint Oreol

The coating obtained with this paint has a beautiful appearance. It cleans well from dirt. There is practically no dirt or dust on the surface, so Oreol paint is perfect for the kitchen or veranda. The paint has good coverage and can be used on any material and with any tool.

After application, the paint dries quickly and does not have a strong unpleasant odor. It is worth noting that the consumption per 1 sq.m. declared by the manufacturer is not always the case. coincides with the practical result. This leads to additional financial expenses when working with Oreol paint.

Acrylic paint Ceresit

The Ceresit company offers a wide selection of different types of paints for finishing the ceiling, but acrylic is considered the best among the entire range. It has no unpleasant odor, fits well, has a high coverage rate and antibacterial properties. The painted surface is easy to care for, washes well and does not lose its attractive appearance.

The disadvantage of this type of material is the need for mandatory preliminary preparation. Without this, the paint does not adhere, and the ceiling covering is of poor quality. However, this material is well suited for mineral plaster work. In this case, there is no need to clean the surface, and you can immediately begin painting work.

Ceresit paint can be used to cover not only the ceiling, but also the walls - it holds up well and does not lose its whiteness even after several years.

The products of this brand are of high quality and good coverage; Ceresit acrylic paint does not fade in the sun, does not crack and does not lose its appearance even after several years. Like other brands, this company offers educational videos on how to paint ceilings with acrylic paint yourself.

Manufacturer's choice

If you have firmly decided that you need water-based paint for the ceiling, choosing a manufacturer becomes the next pressing task. Taking advantage of the fact that paint production does not require expensive equipment, many companies begin to produce products without sufficient experience and knowledge. This leads to the fact that their products are not of very high quality.

When choosing a brand, it is better to give preference to those companies that have been on the market for a long time. It is also recommended to look at manufacturers’ catalogs on the Internet. They present the assortment of each company, photos of samples of painted surfaces, recommendations for choosing a specific type of product.

Choice for ceiling

Before you start working, think about whether it is better to purchase a matte or glossy base. Any glossy material has its advantages and certain disadvantages.

There is a division for the glossy base option. Highlight:

• adhesive;
• emulsion;
• silicate;
• alkyd.

There are special letters on the can that characterize the glossy base. The digital code indicates the range of use of this material:

• 1 – weatherproof;
• 2 - for interior work;
• 3- for processing metal products;
• 4 – for hot water;
• 5 – for fur and leather;
• 6 – for painting products related to petroleum products;
• 7 – resistance to chemical aggressive environments;
• 8 – heat-resistant;
• 9 – with electrical insulating properties.

How much paint will you need?

On the container with the product, as a rule, the paint consumption per square meter is indicated. On average it is 150-250 grams/m2. If you need to tint paint, always prepare a little more solution than you need according to preliminary calculations. Indeed, if there is a shortage of material, it will be very difficult to get exactly the same shade again.

Latex based ceiling paint

If you want to enjoy the perfect look of the ceilings in your home, you may want to think about how to paint with water-based paint yourself so that the color turns out fresh and even. The best product for a snow-white ceiling is based on acrylic and latex substances.

• They lay down in an even, uniform layer, leaving no streaks from the painting tool.
• Latex gives paints special resistance to water and abrasion.
• The painted surface can be washed without disturbing its original appearance for up to 50 thousand cycles.
• The latex type of paint fits perfectly on metal, wood, concrete and wallpapered interior parts.

Storage and use conditions

It must be remembered that water-based ceiling paint should be stored in a room where the temperature is not lower than zero degrees. The quality of frozen paint may noticeably deteriorate. Don't neglect safety precautions. Paint is a flammable material and should never be stored near open flame sources.

Painting work should be carried out at air temperatures above +5 degrees. Otherwise, the paint may thicken greatly and it will be difficult to apply it to the ceiling in an even layer.

Hand-painted ceiling with glossy paint

Despite the apparent simplicity of the entire painting process, its implementation requires strict adherence to a certain algorithm of actions, failure to follow which can lead to serious problems during further operation and cause an unaesthetic appearance of the ceiling.

The procedure is as follows:

1. Initially, the base of the ceiling needs to be cleaned and dried. These measures should not be neglected, as failure to comply with them can lead to the appearance of bubbles and cracks on the ceiling.
2. Next, use a roller or brush to paint the corners of the ceiling.
3. After this, you can begin painting the entire ceiling surface directly. Again, this can be done either with a roller or a brush. The material for the roller can be very different: polyester, velor, foam rubber, polyamide or standard fur. Water-based paint will not be damaged by any of these materials (pro

Glossy and matte finish

Water-based glossy ceiling paint not only looks beautiful, but also has a number of functional advantages:

• water resistance - the glossy surface does not retain moisture, it is easily washed off from dirt;
• strength - acrylic resins form a film on the surface of the material that is resistant to damage;
• economical - a liter of paint is enough for 7-12 square meters of ceiling;
• environmental friendliness - glossy ceiling paint does not contain harmful impurities and is easily recycled.

On the other hand, matte water-based ceiling paint also has its own advantages. This coating ensures no glare and also masks minor surface defects.

Possible problems during painting

When using glossy ceiling paint, the following difficulties may arise:

• the coloring material may be thickened, and then application becomes problematic. To avoid this effect, you should not purchase material sold on street markets. On frosty days, the paint freezes and thickens. When purchasing, pay attention to the expiration date of the product;
• Unsightly streaks may occur during paint application. In this case, when applying the composition with a roller, it is necessary to move it slightly to the side. This way the paint will be distributed more evenly and clumps will not accumulate;
• To avoid sagging of the paint composition, you need to roll the roller along the ceiling while there is liquid in it. You don't need to take a lot of paint at one time.

Advice: if the paint turns out to be frozen, then there is a way out. The composition needs to be strained, and there will be no clots. Next, the coloring composition is thoroughly mixed and a little solvent is added.

How to properly apply paint to a surface

There are several universal rules for painting the ceiling:

• Before painting, it is necessary to treat the ceiling surface with a primer.
• Painting work is best done with a roller rather than a brush. This way the paint will lay down in a more even layer.
• Each new layer of paint is applied at right angles to the previous one. The last outer layer should be applied parallel to the direction of the light rays from the window.
• Before painting, the roller must be rolled out. You can use a paint tray for this.
• It is advisable to paint the entire surface of the ceiling at one time. Fresh water-based ceiling paint applied over the dried area will create a raised stripe.
• It is better to apply a thin layer of paint to the surface, and after drying another one on top of it. This way the ceiling will be more even than if painted with one thick layer.

Painting walls and ceilings with water-based paint, watch the video:

Painting features

The quality of the finished coating directly depends on compliance with the painting technology.

It is important to follow the stages of work and choose suitable materials.

1. The base is pre-prepared. The old coating is cleaned off. Cracks, chips and other defects are repaired with putty. The surface is primed.
2. When choosing paint, take into account the type of old coating. Water-based compositions do not lie on top of alkyd paint. If the consistency is too thick, then the paint is diluted with water or solvents. The volume of liquid introduced should not exceed 10% of the total volume of the jar.
3. Painting is carried out with a roller or spray gun. Painting the ceiling with a brush is inconvenient and impractical.
4. Work begins on one side, moving to the opposite. Experts recommend starting to move towards the window.
5. For better coverage, make 2-3 layers, each perpendicular to the previous one.
6. All visible defects are removed only after the surface has dried.

Painting the ceiling is an affordable and budget-friendly way to change the design of a room.

Light paint allows you to visually enlarge the walls, add light and space to the room. When choosing a suitable finishing material, you should take into account such characteristics as manufacturer, cost, hiding power, wear resistance class.

Additional nuances

A few more tips on how to choose water-based paint for the ceiling:

1. High-quality paint cannot cost less than 30 rubles per liter. The main ingredients for its production, including the polymer base and pigments, are imported from European countries. This means that the production cost of different paint manufacturers cannot vary too much. So a very low price most likely indicates a counterfeit product.
2. For white paint, titanium dioxide is considered the best color. When added to a water-based emulsion, the result is a pure, tint-free, white color.
3. Do not use thinned paint as a primer. This gives almost no gain in quality, but the cost is much more expensive than a regular primer.
4. Pay attention to the markings. The letter code VD means water-dispersion paint. The number after it indicates whether this product is intended for the external walls of the building (marked with the number 1) or for the interior (VD2).
5. Paint that complies with GOST 28196-89 is produced in compliance with the necessary technical parameters, ensuring a high-quality product.

These are the basic principles for choosing ceiling paint.

Emulsion paints

They are diluted with water, but they do not dissolve in it. The binder base of such materials and the main coloring particles are located in an aqueous environment, forming a stable emulsion. As soon as the water has completely evaporated, a beautiful glossy film of the selected color forms on the surface.

Advantages of emulsion colors:

1. Economical.
2. Easy to wash tools and hands.
3. Environmentally friendly.
4. Fire safety.
5. No unpleasant odor.
6. Drying speed.

Advice!
If the water-based material is intended for painting metal products, you must first apply a primer to avoid corrosion of the metal. The disadvantages of such a material include the fact that the emulsion base is prohibited from being applied to a surface that has been painted with adhesives;

Features of interior design using water-based paints

The rich possibilities of the color palette make water-based paint an excellent finishing material for implementing a variety of design ideas.

All the walls of the room can be painted in different colors, or visually expand the room with the help of multi-colored horizontal stripes on the walls.

• For a fashionable room decoration in 2-3 shades of gray, water-based paint is best suited, which creates gradations of the same color very well.
• Water-based paints are easy to create a colorful palette on their basis, and this makes it possible to use them to cover decorative panels made of plaster or wood.

Silicate ceiling paint

This type of water-based paint is made on the basis of liquid glass. The basic component has many advantages, including: water resistance and breathability, high resistance to mechanical stress and durability.

It reliably protects wooden surfaces from fire and is completely environmentally neutral.

Many paints are marked with numbers that mean: 1 - for external types of work, 2 - for internal types of work.