How to choose an interior baguette: designers’ recommendations


Thinking through the features of the updated interior design of their home, everyone imagines a beautiful room, decorated with modern, fashionable design ideas. And it is absolutely not necessary to spend a lot of money on creating a stylish interior design. To decorate a beautiful room, it is enough to use simple but original in appearance materials.

For example, to decorate the perimeter of the ceiling covering, it is recommended to use an interior baguette. This method is not new. But its use allows you to create magnificent interior design.

Types of baguette

Thanks to modern technologies in production, the possibilities of using baguettes are expanding. Nowadays, polyurethane molding is difficult to distinguish from plaster stucco molding of the Baroque era, the unreal shine of the aluminum profile evokes thoughts of spaceships, and lightweight plastic plinths imitate richly gilded frames.

The planks are made from wood, plastic, and aluminum. Each material has features that should be taken into account when planning the design of ceilings and walls.

A wooden baguette is a traditional and understandable solution. The best material for framing pictures has not yet been invented. Especially if the frames are made by hand and contain the positive energy of the master. Unfortunately, for mass production this is a complex, capricious material to process and store. Although its use is justified in country and Provence style interiors.

Gypsum baguettes fit perfectly into interiors in a classic style or luxurious baroque. They emphasize the respectability and solidity of the house. It is difficult to work with plaster; it is fragile, heavy, and afraid of moisture. Therefore, consumers increasingly prefer the use of decor made of polyurethane and plastic.

Polyurethane moldings are quite light, flexible and durable. Therefore, in addition to walls and ceilings, they are used in the design of curved structures. Due to their light weight, they can be glued only from one edge, for example, to the wall when installing suspended ceilings and lighting cornices. Manufacturers are constantly releasing new collections, expanding their range, and trying to keep up with fashion trends.

Related article: 10 secrets for properly placing a painting on the wall

Plastic baguettes are used in the interior when installing suspended ceilings and plasterboard structures. Externally, they look like skirting boards with grooves for locks, most often white. There is a decorative baguette on sale that imitates the pattern of wood or marble. Having the skills to work with paints, you can apply a pattern or paint the baseboards yourself.

Aluminum profiles are used in the construction of suspended ceilings. The planks bend easily and follow the contours of a curved structure. The possibilities for using aluminum are quite varied. For example, in high-tech style, metallic gloss serves as a worthy frame for a poster, mirror, or photograph.

Be careful: foam baguettes are cheap and easy to use. But don’t be fooled by their pretty appearance, because the material tends to crumble and the work will look cheap and untidy.

To summarize, we note: the most natural baguette is made of wood and plaster, the most durable is made of aluminum, the cheapest is made of foam plastic.

Materials for decorative strips

Once upon a time, only plaster was used to make moldings. Today you can find products made from various materials on sale. Let us briefly describe the most popular options.

Polyurethane

Polyurethane baguettes are strong, lightweight and durable. They will last at least three decades, provided that they are properly cared for. Gluing them is easy, the plastic bends well and takes any desired shape. The surface of the polyurethane is smooth, dirt does not eat into it, and it is not difficult to wash it.

The material is resistant to dampness and temperature changes, it does not deform or darken. Therefore, it is used to decorate a bathroom or kitchen. Polyurethane products imitate gypsum stucco well. Available in different colors, if you can’t find the right shade, polyurethane can be painted.

Polystyrene

Foam planks are attractive due to their variety of shapes and low cost. They are lightweight and moisture resistant. Dampness does not destroy them. But at the same time, polystyrene baguettes are very fragile and break easily. They must be handled very carefully, otherwise the surface will be damaged. Even pressing with your finger will leave dents on it. Difficulties may arise during the installation process. Foam plastic, unlike polyurethane, is not flexible, so it will not be possible to bend the product. Another important point: the choice of glue. Some of them dissolve polystyrene.

Gypsum baguettes are very beautiful and have a variety of relief shapes. They are strong and durable, last for decades and do not darken over time. Gypsum is quite resistant to mechanical damage; if necessary, a damaged part can be restored. A significant disadvantage of gypsum stucco is its heavy weight, which requires reinforced fastening. Also among the disadvantages are complex installation and high price. In addition, gypsum is hygroscopic. It absorbs moisture, which can accumulate inside the material and gradually destroy it.

Tree

Wooden strips-moldings are an expensive finish. They are environmentally friendly and beautiful, but rather difficult to care for. The tree is vulnerable to moisture and pathogenic microorganisms. Therefore, before installation and subsequently, treatment with an antiseptic and water-repellent compound is required. Still, it is better not to choose such decor for wet rooms. Heavy material is quite difficult to install. During the installation process, fastening with self-tapping screws is required.

Ceiling decoration

The ceiling molding has a double task: on the one hand, it masks the seam between the wall and the ceiling, on the other hand, it is a decorative element and decorates the room. Installing it is simple. For installation, a special glue is used, which is applied to the baguette and the wall surface to be pasted. For the convenience of consumers, corner models are produced so that you don’t have to think about how to cut the corner correctly.

A modern solution: a ceiling plinth with a thickened lower part and a special groove is glued at a distance of 20 cm from the ceiling. An LED strip is placed on top along the perimeter of the walls. An interesting ceiling lighting effect is created.

Step-by-step instructions for installing moldings

Preparing the base

The finish can only be properly glued onto a flat, dry surface. It is impossible to cover irregularities and other defects with slats. Therefore, they start by leveling the base, if necessary. The smooth base is cleaned of dust and dirt. If there are stains, especially oily ones, they must be removed. They may affect the quality of adhesion. Apply one or two layers of primer to a clean surface. This will improve the adhesion of materials and reduce glue consumption.

Sometimes they want to paste decor onto wallpaper. This is possible, but not the best option. The wallpaper fabric does not always withstand the weight of the baguette, so it is not worth attaching plaster or wood to it. The best option is polyurethane or polystyrene. Those who want to know how to glue molding to wallpaper should remember one more significant drawback of this method. The glue may leave permanent marks on the canvas. When replacing wallpaper, the baguette will also have to be changed; it is unlikely to be reused.

Marking

The prepared base needs to be marked, that is, lines must be drawn on it along which the moldings will subsequently be glued. The easiest way to make vertical markings is to use a plumb line. The top point is outlined and the device is attached to it. The vertical is marked along it. It is convenient to mark the horizontal line by level. The use of devices is mandatory; marking by eye rarely gives a good result.

Decor installation

Before starting work, the baguettes are brought into the room and allowed to “acclimatize” for 24 hours. It is especially important to do this during the cold season, otherwise the quality of the installation will suffer. Start gluing from the corner joints, if any. For precise joining, the elements must be cut at an angle of 45°. This is done using a miter box. The part fits into the fixture. The corner is cut with a special cutter, the direction of its movement is limited by the grooves of the miter box.

I’ll close the door behind you and you close it. What can I say?

The elements prepared in this way are smeared on the reverse side with glue, laid on the marking line, the joint is precisely aligned and pressed forcefully against the wall. Leave it in this form until the glue sets. After this, the element is no longer pressed against the wall, but they try not to touch it until the glue has completely dried. Otherwise, it may move or move away from the wall.

To obtain a better result, the joint area is coated with a special joint glue. The drug is applied generously so that the excess is squeezed out. They are immediately removed with a dry cloth.

After completing the joints, the remaining elements are glued. This is done in a similar way: glue is applied to the part, applied to the markings, pressed, and the strips are left until the mastic has completely hardened.

Source

Wall design

In the design of walls, baguette has many faces and is varied. It highlights a specific place on the wall and attracts the attention of viewers. For example, a collage of family photos or an antique cuckoo clock.

In another case, it zones the space, smoothes out the boundaries between wallpapers of different designs. The joint becomes invisible, and the space becomes more harmonious.

Related article: Homemade shell decor: 3 super ideas

You can install a contrasting baguette around the perimeter of the niche. This design will draw attention to the object. To make the niche look mysterious and romantic, frame its inside, add lighting, and complete the composition with a light, elegant curtain.

You won’t surprise anyone with paintings and posters on the walls. The designers went further, removed the paintings, leaving only the frame. Here it is, the highlight: the baguette in the interior acts as a frame. It is often made from expensive, refined materials. Depending on the style of the room, baguettes made of wood, polyurethane, plaster or aluminum act as frames on the wall.

Advice! Two or three A3 size frames located at a distance of 15-20 cm from each other will look harmonious on the wall.

Varieties


The molding is different in shape, textured pattern, and material. Each type has its own characteristics and characteristics. There are wide stripes with a relief pattern applied for large rooms, as well as thin light stripes used in the interior of small rooms to brighten and visually enlarge.

Wooden

Wood molding is valuable because of the material. Eco-friendliness and appearance make it an expensive finish. It is heavy, so the planks are secured with self-tapping screws.

However, after treating with antiseptic agents and water-repellent mixtures, the finishing is used in the corridor and on the balcony.

Polyurethane decorative overlays


Polyurethane finishing is a combination of quality and price.
It is popular because it has advantages: Planks are used in the kitchen, bathroom, and for zoning a room.

Metal decorative strips

Decorative strips in silver, bronze and gold decorate the walls. They create an expensive, beautiful interior of the room. With this decoration, the room looks rich, so trims for precious metal and ordinary paper wallpaper are incompatible.

Finishing is done for mirrors, fireplaces, niches. To choose a color, you need to consult a designer.

Foam wall molding


The material is lightweight and has the following features:
Finishing for those owners who want to hide wall defects and make the design of the room unique.

Gypsum moldings for a niche

Gypsum finishing has the following advantages:

The disadvantages are the price - they are relatively expensive. And a lot of weight, which leads to difficult installation.

Plastic wall molding


Plastic baguettes are popular for several reasons:
The disadvantage is the grainy surface.

Framing small elements

Mirrors, paintings, engravings, posters, tapestries, photographs... Everything becomes the object of close attention of the designer. Proper use turns these elements into interior highlights. A decorative baguette gives them a new sound and fits them organically into the space.

Tip: even a simple rectangular mirror will become modern and attractive in a new frame made of baguette. Cut the strips to the required length and glue them around the perimeter. The interior will sparkle with new colors!

The final touch to the design

Finally, a few more recommendations from designers.

  • A narrow ceiling molding will visually increase the height of the walls, make the ceiling higher, vertical thin lines will give the room severity, and horizontal ones will add dynamics. Wide options are suitable for large rooms; they will make a small room “heavier” and visually it will seem cramped.

  • If you want to choose a baguette with relief, focus on the general style of the interior, color and texture solutions. Remember that white is a universal color; it goes harmoniously with all shades. If you think that the design should be a different color, experiment and paint the baguette before starting work.

  • Competently combine style, measure, and imagination in interior design. Then you will not have to regret the time, effort and money spent. The result will please you for many years.

Related article: Autumn apartment decor. Create a mood for yourself and your loved ones

Apartment design with baguette (2 videos)

Apartment design options with baguette (43 photos)

What you need for work

Before you start processing, you need to stock up on everything you need, the list may vary, but in general the main elements are the same:

BaguetteIt is important to choose the option that is best suited for a given situation. For example, for small rooms you should not choose massive options; the pattern on the surface should fit organically into the decor. In addition, you need to determine the configuration, it depends on the mounting location, if the elements will be located under the ceiling, then corner options are needed, and if on the wall, then flat
AccessoriesSome product collections provide for the presence of corner elements, most often they serve as an additional decorative element, in addition, they save you from the need to cut the baguette and join it at the corners, this process most often presents the greatest difficulty for beginners
Adhesive compositionTo securely attach the baguette to the wallpaper on the wall, you need to use high-quality glue. You should not save on this group of products, as you risk getting an unpleasant surprise in the form of peeling sections in a year or even earlier; low price should not be a determining factor when choosing; it is best to consult with specialists on this issue and read the information on the Internet Internet
ToolIf there is a need for cutting corners, then you cannot do without a miter box, because only with its help can you make a perfectly accurate angle, and you can also make straight cuts perfectly even

Important! Since a modern baguette is made of polystyrene foam, it may differ in quality; when choosing, pay attention to the structure, it should be fine-grained and very dense so that particles do not fall off.


Baguettes for wallpaper can have a very chic look, which allows you to transform the room with your own hands with minimal time and money.

Rating
( 2 ratings, average 4.5 out of 5 )
Did you like the article? Share with friends:
For any suggestions regarding the site: [email protected]
Для любых предложений по сайту: [email protected]