Table of sizes of PVC window sills: working with a tape measure and coating materials

SHARE ON SOCIAL NETWORKS

FacebookTwitterOkGoogle+PinterestVk

On trading floors there is a large selection of window sills, for example, made of wood or natural stone, but such designs are quite expensive. Plastic products, firstly, are lower in cost, and secondly, thanks to modern technologies, plastic is not inferior to natural materials in quality and appearance. If you choose the right sizes of plastic window sills, the products will decorate the window and make the repair complete.

Plastic window sills are not inferior in appearance to products made from other materials

Should I replace wood with plastic?

On the one hand, wood is an environmentally friendly material. It “breathes” and does not release harmful substances into the surrounding air. Only if it is not saturated with “chemistry”. But a number of disadvantages completely cancel out the advantages:

• Sensitivity to water . Almost the entire territory of the Russian Federation , and the CIS , has a humid climate. The liquid destroys the wood fibers. Mold and mildew settle in cracks.
• Necessity of processing . Without paint, antiseptic and varnish, gray spots quickly appear on the surface. You need to deal with windows and window sill panels at least once every 5 years.
• High price . Natural materials are more difficult to “extract”, store and process. Therefore, the price sometimes “bites”. Especially for valuable breeds.

Let's expand on the last point. Let's take a window sill 2000 × 100 × 40 mm. Let’s find the first calculator we come across on the manufacturer’s website and get the following figures, current as of the end of March 2021 :

Plastic: 1092 rubles.

Wood: 3240 rubles.

This is the cost of oak. For ash you will have to pay 30% less, but still 2 times more than for PVC. That being said, this was an honest review. It's up to you to draw conclusions.

How deep should the window sill be?

The depth of the window slab is measured from the substitution profile into which the window sill rests. It should be 5 mm longer than its length.

Is it possible to cut to depth?

It is recommended to trim the concrete window sill in depth only in cases of absolute necessity. The fact is that it is not possible to detach the window sill board from the frame, clean it of mounting foam, carefully trim it and reinstall it under the window while maintaining the original appearance. All of the above operations will negatively affect not only the appearance of the window sill, but also the quality of installation as a whole.

Standard sizes

It is clear that the Russian housing stock consists mostly of Soviet-era apartment buildings. Everything about them is typical and standard. Just remember the film “The Irony of Fate”. This moment is shown perfectly there.

Therefore, manufacturers produce a line of standard window sills, plus or minus 5 mm. Let's list the parameters in the table.

It would seem that it is enough to measure the old window sill with a tape measure. Then write down the results and order a new one. Not so simple. During dismantling, part of the supporting surface of the walls will crumble. You will have to add a few millimeters to the results obtained.

Free call to a surveyor

In order to understand the cost of plastic windows, with window sills, ebbs, and slopes, you need to invite our engineer

WHS Halo 60

An inexpensive option for glazing multi-storey buildings. It is 100% worth the investment in it.

Price from 5915 rub.

WHS Halo 72

Specially designed for the extreme Russian climate, an ideal glazing option.

Price from 7410 rub.

VEKA Mira

Refinement and perfection in everything, unsurpassed protection from bad weather, a worthy profile from VEKA.

Price from 7995 rub.

VEKA Softline 82

Premium line of the Century model range, single-plane Softline system, one of the warmest windows.

• Manufacturer : Werzalit (Germany).
• Manufacturer's warranty : 15 years.
• Material: Pressed shavings.
• Window sill dimensions : width from 200 to 600 mm.

Werzalit is a monolithic material.
Thanks to the evenly distributed chips and the absence of adhesive seams, it is very durable. The strength of the product is achieved thanks to shavings from coniferous and deciduous trees, plus the absence of harmful impurities. The production technology for wood-plastic window sills is as follows: at high temperatures, the resins of the decor and the base material are combined to form a homogeneous material.

You can easily choose the color of Werzalit window sills that suits you, as they can be made in a variety of colors.

Individual parameters

When designing a country house or glazing a modern office, standard sizes are not very suitable. Here you will have to take on the calculations. Production lines are capable of producing window sills with the following parameters:

Nowadays, companies producing plastic window systems offer to call a surveyor to your home in advance. This is a free service. Do you have doubts about your abilities? It's better to leave this to a professional. And if there are no doubts, you can proceed to action.

Application area

PVC window sills, in addition to being divided into classes according to the name of the manufacturer and price, can be conditionally divided into other classifications, which, when ordering and installing, must be confirmed by appropriate quality certificates.

Premium plastic window

Such gradations may include:

• Recommendations for installation in rooms with high humidity - bathrooms, laundries, baths, saunas.
• Availability of a hygienic certificate for installation in children's institutions - schools, kindergartens, children's art studios and sports facilities for children are equipped with such systems.
• Permission for installation in residential premises, houses, hotels.
• Compliance with requirements for hospitals, operating rooms, pharmaceutical industries.
• On the other hand, the use of heat-resistant and fireproof models can also be carried out in private homes, for example, in the kitchen, where recently it has become popular to place the hob near the window.

Measurement Rules

There is no need to pick up a tape measure to measure the window sill if this point is taken into account at the design stage of the future home. But what to do when it's time to install a new window? Ideally, you first need to dismantle the old one.

But in the conditions of the domestic climate this is not so simple. The reasons for this are snow and frost in winter, rain and chilly wind in summer. Therefore, we suggest reading useful tips. You won’t have to “remove” the window if you do this:

1. Add 50 - 100 mm to the length.
2. “Throw it” over a width of 30 - 40 mm.
3. Make the overhang above the wall level no more than 20 mm.

If you order a structural element with a reserve, then a wall knocked out during dismantling will not be a disaster.

The air from the heating battery should not “get stuck” on the windowsill. It is better to refuse a long flight.

Relaxation area: ideas on how to decorate a window sill

text:

Olga Sinyavskaya

4 tips

for those who want to decorate the window sill in a non-standard way: - if you want to use the window sill as a sofa, it should be strengthened - wide wooden tabletops that can withstand heavy weight are suitable for this; - a relaxation area on the windowsill can only be arranged if the window retains heat well and protects from drafts; — for organizing a lounge space, low window sills are suitable - 45-50 cm from the floor, so that it is convenient to climb on them. Comfortable tabletop width – from 60 cm; — it is better to move the heating radiator located under the window sill-sofa to another place, or cover it with a decorative screen.

"Window-reading room"

– a convenient option for the library. You can choose a book and immediately sit down with it on a comfortable lounger. www.harrell-remodeling.com

An original way to equip a dining area is to place it on the window sill in the bay window.

corner sofa and place a round table next to it. www.estiloydeco.com

You can turn a seat on the windowsill into a relaxation area for a small company by placing poufs nearby. www.2designgroup.com

Dining area in the bay window

, will help save space in a small kitchen and allows you to do away with chairs. www.lagunabeachmagazine.com

Under the window sill with a bed it is convenient to place baskets with toys for which there is always not enough space in the children's room. www.arkintilt.com

A cozy sofa by the window will fit perfectly into your home office.

and will become a bright accent in the interior. www.brianotuama.com

It is better to choose pillow-beds for the windowsill with artificial filling so that they can be easily washed in a machine. Your pet may well fall in love with this place

for sleeping, so you will most likely have to wash the “flooring” quite often.

The window sill in this multifunctional corridor combines seating and additional storage areas, and also serves as a bright interior accent. www.architectureartdesigns.com

A bright sofa helps to decorate an attic niche

. www.2designgroup.com

The window sill in the bay window of the kitchen-living room has turned into a bright lounge area with a convenient storage system. www.benheath.com

Stay with us! Register on the site to:

• - save materials that are useful to you
• — add designers you are interested in to your favorites
• - create your own albums of interior ideas
• — mark your favorite products from Kaliningrad companies
• — receive information about updates on the site

Registration will take no more than 2 minutes. You can log in even faster using social networks:

Selecting length, width and thickness

As for length , there are a couple of options:

1. According to the size of the opening . In this case, the plastic panel fits closely to the side walls. Easy to install. But the strength will remain low. Stand on such a window sill and it will bend.
2. With wall supports . The edges are “walled up” into side openings cut into the walls. This will give the board two additional support points. It will be able to withstand heavy loads.

The width is chosen depending on the material from which the load-bearing wall is made:

1. Panel . Maximum width: 350 mm. Because of the subtlety.
2. Brick . Largest: 780 mm. The masonry will hold up.

The thickness can be chosen as desired. It all depends on the required functionality:

1. Standard . The usual parameter is 22 mm. This is enough to put flower pots and place some not too heavy things.
2. Extended . From 30 mm. When the window sill serves as a miniature table or shelf. Enough for a sun lounger.

What components will be needed to install a window with a window sill?

Installation of window sills does not require any skills or special knowledge. Any owner will be able to handle the installation independently and without using any complex tools. However, in order for the installation to go smoothly, you will need to take care in advance of all the necessary accompanying items, which are not always included in the complete set when selling a window sill.

First of all, for installation you will need a connector and a double-sided end trim for the window sill. The main purpose of the cap is decorative, because the cut end part will not have an attractive appearance and will require framing. The part has 2 spouts, and before installation it will need to be divided into 2 parts: one is inserted on the left side, the second on the right.

In addition to the window sill, you need to purchase all the necessary components

You will also need a PVC window sill connector, which is used to join the product at an angle and connect along the entire length. In addition, you will also need to purchase:

• brackets;
• stands;
• slopes.

After dismantling the old window sill, the slopes are often severely damaged, which will require at least minor repairs. The slope itself is the perimeter of the window, located from the frame to the edges of the wall surface. The brackets are useful during installation because they can prevent surface deformation after installation. As you know, the window is considered a favorite place for placing flowers in pots, because here the plants receive the greatest amount of sunlight necessary for their normal growth. But still, if the flowers are heavy and voluminous, it is recommended to use special stands for this purpose.

What are decorative window sill covers?

Plastic is not considered a particularly durable material and, under any impact, can lose its appearance, and not only crack, but also change color or be scratched. It is for such situations that repair linings for window sills were invented, which make it possible to give a damaged product an attractive appearance.

Overlays are a quick and inexpensive way to update your window sill

The size is selected based on the parameters of the already installed window sill. Here, the main material is also PVC, which gives the parts the necessary strength and rigidity that is required to protect the surface. In some cases, the linings are equipped with a profiled edge and plugs that help hide not only imperfections, but also unevenness of the main window sill. The main thing is to choose the right size, for which you should carefully measure the already installed option and add 2 cm to the resulting value, because the overlay should be slightly larger than the window sill.

Important information! The plastic cover on the window sill must be larger than the main surface, since the position will have to be adjusted during installation. In this regard, there must be a certain reserve, otherwise the product will not look aesthetically pleasing.

Rules for determining the size of the window sill trim:

• the length of the material must fully correspond to the length of the window sill;
• It is recommended to measure the width from the frame to the edge of the slab.

There are a large number of options available for the color design of the overlays, including those imitating natural materials. But the most common are white overlays. In this case, the end must be closed, because otherwise the window, window sill and even the room as a whole will look unfinished.

Coating materials

The base itself is made of PVC - polyvinyl chloride, and is not very aesthetically pleasing. In order for the window sill to fit into the interior, you will have to mess with the color scheme. It will be useful to select the material for cladding in advance:

• Acrylic . Reliable protection. You can forget about scratches from metal tools and knives. Any shades available.
• Film . Made of plastic. Does not fade in the sun. Economical option. That's all the benefits.
• Melamine . Consists of polymer resins. It is applied in several layers, usually 7 - 8 . You can choose a decorative texture.

Is the owner of a house or apartment happy with the standard white color and takes good care of the window sill? It is enough to choose a regular film.

MATERIAL AND TECHNICAL RESOURCES

4.1.2. An approximate list of the main necessary equipment, machines, mechanisms, technological equipment, tools and accessories is given in Table 4.1.

Name of machines, mechanisms and equipment

Quantity per link, pcs.

Construction mast lifts with a lifting capacity of 0.5 t

Lifting products and materials

Flatbed vehicles with a carrying capacity of up to 5 tons

Along with the installation of plastic windows, it is best to install a PVC window sill, which is logical. The use of identical materials ensures a harmonious combination of structural elements. This also means full compliance with technical characteristics, the same service life of products and surface care. Therefore, PVC window sills are ideal for plastic windows, which can be matched to any color scheme of the window structure. This choice allows you to improve the functional features of the window design and decorate the interior with taste.

Helpful tips for the installation phase

• Leave the slope. It is better to install the plastic panel at an angle of 3 - 4 % to the floor. Otherwise, the spilled liquid will remain in a puddle and will not drain. When it dries, it will leave stains and streaks.
• Seal seams. No matter how tightly the board is fitted to the window, in winter the cold will enter the cracks. And in the fall the wind will blow right through the joints. To avoid heat loss, use sealant.
• Place supports. If the overhang length exceeds 300 mm, it is better to additionally strengthen the window sill panel with metal corners or supports. This way the edge will not bend under load.
• Use a ventilation duct. The window sill in apartments often blocks the radiators. To prevent heat from stagnating, you can install a screen with directed holes on the heater.

By following these simple tips, you can permanently increase the service life of plastic panels. For clarity, we suggest watching the video:

Advantages

The quality and performance characteristics of plastic window sills provide them with a number of advantages.

• The strength and wear resistance of this design make it possible to avoid deformation or any damage due to mechanical stress. It retains its shape perfectly throughout its entire service life.
• Resistance to temperature loads, sunlight, and moisture protects against swelling and fading.
• Compared to other materials, they have higher thermal insulation properties, which is very important in the cold season.
• Easy installation saves time.
• Caring for them is quite simple. They are easy to clean with warm water and detergents.
• The color range is quite extensive, which allows you to install a window sill that matches the interior of the room.
• High decorative qualities, giving the structure an aesthetic appearance.