Wooden wall in the living room: 150 fresh photos of ideas for decorating walls with wood with your own hands (modern decor options)

When starting renovations in a house or apartment, starting the final decoration of the premises, the owners spend a long time and lovingly choosing materials. They carefully weigh the pros and cons, evaluate durability, practicality, and aesthetic qualities. After all, wall coverings are usually done for a long time. Major repairs are undertaken no more often than once every 10-20 years, and cosmetic repairs - once every 5-7 years. Owners require material that will meet high requirements:

• maintain its qualities for years;
• please with a presentable appearance;
• create a suitable atmosphere in the room.

Traditional types of finishing materials are not always suitable for homeowners.

• Wallpaper does not hide construction defects in walls well. Paper varieties quickly tear, fade, and cannot be washed. In addition, in a moisture-saturated atmosphere, the edges of the canvases begin to peel off.
• Plain painting with enamel, acrylic or latex paints may seem boring and is not suitable for all interior designs. In addition, such a coating requires perfectly smooth walls, without cracks, chips, or waves.
• Decorative or simple plaster, with the proper imagination and creative approach, is an excellent solution that opens up a lot of possibilities. However, it is not without its drawbacks.

That is why modern interior design masters recommend taking a closer look at a unique finishing material – wood.

Features of wooden walls in an apartment

Firstly, wood blends harmoniously into any interior. And if it is not possible to transform the entire apartment in this style, then you can decorate at least one wall with wood.

Installation process

For all types of decorative wall decoration with boards, one work process is followed, which is done in three steps. What does decorating a room with wood look like step by step:

• preparatory work is carried out with the material;
• a frame is made on the walls;
• cladding is carried out with a decorative product.

After purchase, it is recommended to dry the material, but not artificially, but under natural conditions. The room where the finishing material is stored must be well ventilated. In order for the wood to dry properly, decorative boards should be laid in layers, but be sure to install linings between them. Then a void will form between the slats, and air circulation will accelerate. Coniferous trees take a long time to dry out, while larch trees dry out faster.

To construct the sheathing in an apartment or house, you can use a metal profile or wooden square planks. The profile is superior to wood in that it has a high service life and ease of installation. The frame is always made across the material being sheathed: if the decorative boards are mounted in a vertical position, then the sheathing is done in a horizontal position. This design is attached regardless of the condition of the wall, so there is no need to level the surface. If wood is used for the frame, the walls must be treated with special antifungal agents.

In those rooms where there is a high concentration of moisture, specialists solve the problem by installing mini-ventilation. It is enough to make a few small and unnoticeable holes in the casing, and the entire structure will be ventilated. It is important to choose insulation in advance. If mineral wool is used, then a distance of 50 cm is maintained between the bars. Insulation is carried out by placing wool in the cells. Assembly technology may vary. It all depends on the chosen finishing material:

• method of joining between two parts;
• method of installing boards in special grooves.

In the first option, the facing boards are fixed using self-tapping screws. But symmetry must be observed. It is necessary to screw in the screws only along the cord or line: this way they will add aesthetics to the appearance of the finish. Experts advise masking the heads of the screws; therefore, they are screwed in so that small indentations of a couple of millimeters are formed. The holes are covered with putty, and paint identical to the color of the boards is applied on top.

In the second option, the assembly technology resembles the installation of parquet. Screws or nails are attached to the sides of the planks until they are slightly deeper. In this case, you won’t have to do the work of masking the caps, and the design will be seamless.

The advantage of using wood in decoration

I would like to note the main advantages of wooden finishing:

• Wood retains heat well.
• This material is absolutely environmentally friendly.
• The finishing surface can be painted any color you desire.
• Availability of wood. It is sold at any hardware store.
• Life time.

This material goes well with brick, stone, concrete, leather and other materials. Also, with proper surface treatment, wood will last for many decades. The main thing is to choose a good varnish or paint and apply it strictly according to the manufacturer’s technology.

Also, this material has a very pleasant feature - the smell of wood. Agree, the aroma is pleasant.

How to age wood

Tools for brushing wood: protective face mask, grinder, sandpaper, iron brush.

Wood can be artificially aged in various ways. The brushing method is very common. Brushed wood is used as ceiling beams, as flooring, for making and decorating furniture. You can create an imitation of antique wood with your own hands right at home.

You just need to remember that not all breeds are amenable to such treatment. Brushing technology is not applicable for maple and beech, for cherry and teak, for pear and some other species. Larch, pine, walnut, oak and ash are excellent for processing.

Brushing is done as follows:

1. The surface of the wood is treated with a stiff brush with metal bristles.
2. The softer layers in the composition are deformed and removed.
3. The brushed wood is varnished.

Using a thin drill, you can create the effect of a worm infestation.

Which is better: heated floors or radiators?

Warm floorBatteries

The processed material can be used for the manufacture of furniture parts, entrance and interior doors, for wall cladding in a sauna or bathhouse. You can continue processing by creating a patina effect. During the patination process, part of the wood pores is covered with stains of various colors.

A layer of dye is applied to the surface of the wood and immediately wiped off with a rag. As a result, the wood acquires a light background against which dark pores stand out. The patina must be protected with a layer of varnish.

Artificially aged wood combines perfectly with metal decorations obtained by cold and hot forging, looks solid, and emphasizes the sophistication of the aesthetic tastes of the owners. The facades of the houses, decorated in antique style, immediately catch the eye because the estate resembles the structure of the last and the century before last.

Stain is necessary to give the base dark color of the wood.

To create a home in retro style, you must follow the following rules:

1. Use finishing materials from previous years or their modern analogues.
2. All decorative details must be made in the same style.
3. Windows, roofing, fences and courtyard buildings should be subordinated to this style.
4. It is advisable to make the roof copper or very similar to copper. This is a very expensive but durable material that acquires a greenish tint over time.
5. You can use modern metal tiles coated with a layer of polymer that imitates copper.
6. The interior decor will be perfectly complemented by imitation of load-bearing ceiling beams made of brushed wood.
7. Doors can be decorated with natural antique veneer.

Wall covered with pallet boards

Without any problems, you can find a dozen pallets, disassemble all the boards, get rid of the nails, and then use them in the interior. And this is one of the most budget options in my opinion.

• For such a wooden wall you will need a plane, sandpaper, an electric jigsaw, nails or screws and a good wood finishing compound.
• I would like to note the main convenience of such an interior - all the boards from the pallets are the same size. The wall is assembled simply like a mosaic.

Plastic

If wood-look walls are decorated with plastic panels, you don’t have to worry about exposure to moisture - plastic tolerates even direct contact with water. However, such products do not look very attractive, due to the fact that the texture and design do not look very realistic.

In addition to the fact that plastic has excellent moisture resistance, it is also distinguished by the lowest cost. The option is quite budget-friendly and can be used not only in city apartments, but also in dachas, as well as when decorating various technical rooms. The disadvantage, in addition to not the best imitation of wood, is the low strength of the planks - if handled carelessly, the surface can be easily damaged.

Wall made of round saw cuts

This is another simple and interesting way to decorate a wooden wall. To solve this problem, you need to cut round planks from stumps or tree trunks.

Rounds should be attached to the wall in two ways:

1. Make a wall out of plywood and nail the material to it.
2. The rounds are glued to a flat wall surface using special glue.

Wood wallpaper

Walls covered with natural wood wallpaper
Wood wallpaper is an alternative to real wood finishes. A paper base is used as a base, and a special wood veneer is applied to it. The material is sold in rolls.

The cost depends on many factors, but the main criterion is the price of raw materials.

Wood wallpaper

The process of gluing wooden wallpaper to the surface of a wall is not much different from the technology of applying conventional wallpaper. The only difference is the result, as we end up with a wall that looks like it was made of wood.

Wooden wall made of parquet or laminate

Did you know that laminate can be laid not only on the floor? It is great for wall decoration, just like parquet. And such a wall will be perfectly flat.

Of course, laminate can hardly be called wood. But his appearance says otherwise.

Finishing with solid wood boards

Finishing with solid wood boards
Proper surface covering with solid wood boards allows you to get a spectacular interior that will be the envy of all your friends. The use of special impregnations based on wax and oils gives the boards a velvet-like appearance. In addition, these products allow you to create a film on the surface of the boards that repels water, which prevents the development of fungus and mold.

Wall decoration with clapboard

It's no secret that lining is prepared boards designed specifically for interior decoration. This is why this material is considered the most common for creating a wooden wall.

Depending on the cost, the lining can be made from various types of trees. There is also eurolining, it is already fully processed and ready for installation on walls and ceilings.

Criterias of choice

Before you start installing the boards, it is advisable to look at the finished work with photographs and select the project you are interested in. If you don’t like something, you can create your own sketch of the future decoration. When choosing a material, you must adhere to the following nuances:

• decide on the color of the material;
• choose a type of wood suitable for the overall interior;
• give preference to finishing products that are of high quality;
• installation technology should be taken into account, since it is different for each type of plank.

To buy the right amount of material, it is recommended to make a calculation. If this is not possible for any reason, then you need to contact a specialist, otherwise if the calculation is incorrect, there will be a surplus, which means money will be wasted.

It happens that the owners of houses and apartments, when choosing such decoration, do not pay attention to the shades of the products. With the right approach, the room can be visually expanded. It is preferable to choose several types of cladding with different tints.

Wall made of wooden slats

Another interesting design is the vertical installation of beams with a certain distance between them. This is a relatively modern and fashionable design. Most often used in the living room.

• In addition to finishing the wall, this technique is used in the middle of the room, creating a partition. And such a partition also allows light to pass through.
• This technique divides the space into different zones. For example, separating the living room from the kitchen.

Material characteristics

Wood is considered a material of universal value and can be used in various ways. Many people note that when arranging walls with natural wood, the house becomes comfortable and beautiful. Manufacturers are constantly improving quality and performing additional impregnation and processing of the material, after which such products become more resistant to rotting and abrasion, and therefore their service life increases significantly.

The width of ordinary decorative strips is approximately 3 cm. Expensive options are those products whose width does not exceed 2 cm and length - 12 cm. Basically, not too hard species are used for decorating walls with wood, for example poplar, alder, linden and aspen. And among the expensive species they prefer ash, oak and maple. In general, wooden materials have the following advantages:

• increased sound insulation;
• ease of installation;
• long service life;
• many design solutions;
• high environmental friendliness of the material.

It is convenient to work with wood. You don’t have to spend a lot of time on the interior lining of the room. There is another plus - there are no requirements for preliminary work on leveling the surface of the walls; in other words, all minor unevenness and roughness can be left. Natural wood is a guarantee that the house will be environmentally friendly. Even if impregnated products are used, they will not have any negative impact on health.

The next advantage of wood is the absorption of fumes. If there is high humidity in the house, then some of the water vapor will be eliminated, and after a while it will return. Thus, a normal microclimate will be maintained in the room. There will be no difficulty in choosing the desired decoration and color, because there is a truly wide range of different products on the market.

Combination of wood with other materials

As mentioned earlier, wood goes well with other materials. For example, wood in the interior goes well with stone.

These two materials combine perfectly in the interior of any room.

• In the "Country" and "Provence" styles, a combination of stone mosaic on a wooden wall is used.
• In addition, the boards are in perfect harmony not only with bricks, but also with slabs that imitate brickwork.

Block house for wall cladding

Block house for wall cladding
Some apartment owners strive to make their home original and in some ways even extravagant. So if you are tired of boring solutions, then pay attention to the block house, that is, a board whose cross-section imitates the rounded log known to everyone from village landscapes. With the help of this material you can achieve a real “rural” interior in your home.

To make the design look even more impressive, it is recommended to resort to a method such as artificial “aging” of the wood. For this, the method most often used is “brushing”, that is, processing the material with a wire brush. During the processing of wood, fibers are removed from it, which creates an interesting relief. After this, the material is painted and, without allowing the paint to dry, it is removed.

Wooden wall in the nursery

Wood is a non-toxic and environmentally friendly material. This means it is ideal for decorating a children's room. If the surface of the wood is coated with a light varnish, then this atmosphere will give the children's room a calm and comfortable atmosphere.

And also, this material can be used to cover both a boy’s and a girl’s room.

Laminate

In their design, such planks are very similar to MDF. A base made of pressed shavings and sawdust is also used here, and the outer decorative layer can be either film or made of real veneer. When decorative finishing of vertically located planes is carried out using laminate, you can choose the thinnest plates, which will reduce the overall repair budget.

Another advantage of such panels will be their resistance to moisture and abrasion. The coating will last for many years if you do not wet it too much and do not install it in rooms with high humidity. These include only the bathroom, since the moisture present in kitchens is relatively resistant to laminate. You just need to choose a moisture-resistant type.

Living room

If there is a fireplace in the living room of your house, then wood will perfectly complement the interior, creating the interior of a cozy country house.

Wooden furniture is also perfect for this interior:

• Table,
• Chairs,
• Cabinet and similar items.

How to do patination

Primary processing is carried out using the technology described above: soft fibers are removed, relief is given and the surface is polished. Only after this the workpiece can be patinated.

Step 1. Take any wood primer and carefully apply it to the wood with a brush. The primer should penetrate well into all grooves and recesses. Allow the workpiece to dry.

Apply primer

Step 2. Apply the first coat of paint. Acrylic paint is best suited because it is not prone to peeling, adheres well to the surface, and does not leave streaks.

We apply paint on the photo composition of smoky color)

You can choose any shade of paint you like

Application of white paint, example

The choice of color depends only on your preferences; you can take any shades, the main thing is that they are rich and contrast with the patina shade. The paint is applied with a brush, evenly distributing the composition in a thin layer. The base coat must dry completely, so take a break from working for a day.

Take a break from work

Step 3. Sand the workpiece with fine sandpaper. Wipe off the dust and apply a layer of patina with a brush. It is best to choose a patina for wood in the color of bronze or gold, with a metallic tint. Here it is not necessary to distribute the paint evenly; on the contrary, the difference in coating density will only emphasize the aging effect.

Grinding

Sanding emphasizes the texture of the wood

Wood after processing

Step 4. When the patina begins to set, you need to take a dry cloth and wipe down individual areas. After the paint has dried, the wood is coated with clear varnish.

Applying varnish from a spray gun

Effectively aged wood

Types of patina for wood

Hallway

In Russian hallway interiors, panels, plywood, and various slats are increasingly found. In the hallway, a wooden wall can be a continuation of the closet.

Also, cabinet doors are often lined with wood.

In addition, when returning after work, the first thing you find yourself in is the hallway. Therefore, the hallway should be as comfortable as possible. A wooden wall will greatly contribute to this. And it is not necessary to cover all the walls in the hallway with wood. This material goes well with wallpaper.

As you can understand, wood can harmoniously complement the interior of any room. The main thing is to approach design wisely.

Wall paneling

Decorating walls with panels
The most popular type of finishing the surface of walls using panels is considered to be a herringbone pattern. To implement it, you will need tools such as a protractor, a hacksaw, adhesive tape (double-sided), casing and a pencil.

The finishing process consists of several key stages:

• calculation;
• marking;
• cutting planks;
• fastening.

Let's look at each of them in more detail.

Step 1. Draw up a diagram on a piece of paper of what the finished wall should look like. It is very important to pay attention to the accuracy of measurements. This is an extremely important stage, so you should not approach it carelessly.

Step 2. Using a simple pencil, draw a straight vertical line clearly in the middle of the wall. It will serve as a boundary for the correct laying of the panels.

Laying piece parquet in a herringbone pattern Laying parquet

Step 3. Prepare the panels. This means we take them and cut them at a 90 degree angle so that one edge is slanted. One half of the boards should be cut from the right corner, the other from the left.

Laying

Step 4. Take double-sided adhesive tape and attach it to the panels. It is important that each strip has three longitudinal strips of tape.

Step 5. First of all, we attach the middle elements. For this you will need an assistant. We apply the planks at oblique angles, focusing on the drawn line. It is important to ensure that there are no gaps between them.

Step 6. Fix the panels on the wall. To do this, remove the protective film from the elements and press the planks tightly to the surface.

Step 7. Focusing on the panels that were glued first, we continue to paste over the wall by analogy.

Focusing on the panels that were glued first, we continue to paste the wall by analogy

This option is most often used for bedrooms, but you can try it in the kitchen as an experiment. Don't be afraid to trust your taste and realize your fantasies. In addition, wood is a material that makes it easy to realize creative ideas.

Prices for popular finishing wall panels

Wall panels

Video - DIY tree on the wall

Photo of a wooden wall in the living room

Wooden house design styles

Traditionally, when decorating the interior space, they try to create coziness, comfort, fill the house with beauty, peace, and sometimes special attention is paid to obtaining luxury. Wood has always been distinguished by its nobility; it is considered a colorful material that takes most of the attention. When creating an interior, you need to take this into account and all arrangement work should be oriented towards this. Therefore, there is no certainty that all the details of urban civilization will organically fit into a country interior and will look great against the background of wooden walls.

Interior of a wooden house similar to a Russian hut

larch as a material for decoration in the Russian style

The powerful ceiling structures created by wooden beams do not spoil the interior at all. They complement it with the rustic flavor inherent in wooden structures, add variety and emphasize the home owners’ passion for folk traditions and respect for the natural beauty of life.

Natural stones look presentable against the background of wood, which only support the direction of the house towards nature. This finishing is aesthetic and practical - the service life of stone products is estimated at more than tens of years.

A fireplace is a successful decoration and addition to the interior of a wooden house. A living, beautiful fire leaves delightful reflections on a natural wooden surface, and in combination with the inherent aroma of wood, you get a real symphony of twilight and mystery.

colorful Russian interior

The fireplace is located in the central place of the house and is considered the main element of the interior, providing the space with special comfort and warmth. Relaxation occurs under the soft lighting of a natural fire. Installation work on installing the fireplace, like the fireplace itself, must comply with GOST. For a wooden house, installing a fire source is quite a risky business; it is necessary to prevent sparks from hitting wooden surfaces and provide for the construction of high-quality draft.

Wooden houses in Scandinavian style

The second most commonly used style for the interior of a wooden house is the Scandinavian style. The decor is simply permeated with the idea of ​​minimalism, simplicity and consistency. White, beige and blue colors combined with sunlight from the spacious windows create a wonderful atmosphere in the house.

interior in Scandinavian style

The most popular material in the Scandinavian style is wood. Furniture made from solid coniferous or deciduous plants is decorated with natural cotton or linen fabrics. Items in the house are arranged in such a way as to save as much space as possible. The Scandinavian style is most suitable for wooden buildings in spirit and the atmosphere created through the use of natural materials.

The interior decoration of a wooden house can radically change the interior, fill it with space, visually enlarge it and create an individual atmosphere unique to this building. By using materials of different quality and price, you can reduce the cost of construction, add variety to the interior, and give it a finished look.

Photo gallery - interior decoration of a wooden house: