Choosing a skirting board for painting, how and with what you can paint a skirting board MDF, foam plastic, polyurethane, plastic, tips on choosing paint and varnish

When the finishing work reached its final phase, it was time for the final touch in the interior design - installing and painting the baseboard. We will look at how to paint a floor plinth in a suitable tone and choose a paint so that there is harmony in the interior.

A floor plinth is needed to close the gap between the wall and the floor around the perimeter of the room. In addition, today almost all skirting boards have a cable - a channel that allows you to place cables in it.

There is currently a huge range of materials for skirting boards, but we will consider only those types that need to be painted.

Types of skirting boards for painting

Wooden is an environmentally friendly building material, strong, resilient, easy to maintain, durable, and has a respectable appearance. They are installed mainly on parquet, wood and in dry rooms.

MDF - made from compressed wood fiber, mounted mainly on laminate, linoleum, and other floor coverings. Beautiful, does not fade from sunlight, environmentally friendly, resistant to pollution, easy to clean, easy to care for, but fragile from a strong impact, inferior to wood in terms of durability.

Manufacturers offer ready-to-install MDF products or unpainted planks, the color of which you can choose and paint yourself.

Before considering how to paint a floor plinth, let’s decide on the range of paints and varnishes for this work.

Paint for floor skirting boards

When applied, alkyd paints (enamels) form a durable and dense water-repellent film on the surface that is resistant to mechanical damage and detergents.

They should be applied to a dried baseboard, since otherwise, when the fillet dries, bubbles will appear on the paint layer, which will lead to peeling of the painted layer. The drying time is short, but a significant drawback is that these materials have an unpleasantly pungent odor.

Acrylic enamel is a water-based composition, so the surface of the treatment breathes. In addition, it is moisture-resistant, odorless, easy to care for, does not dry for long, and is characterized by durability and fire safety properties.

The list could go on for a long time - these include polyurethane varnishes and paints, oil paints are still in use today, all kinds of varnishes and other modern paints and varnishes. To highlight the texture of the wood, you can simply coat the product with alkyd varnish, if desired, pre-impregnated with stain.

Which paint to choose

Foam and polyurethane planks usually change their original white color. Paintable MDF skirting boards are also available. Sometimes edging decor made from solid wood is also designed in a similar way. Of course, the paint should be chosen depending on what material the baseboard is made of.

On the modern market there is simply a huge number of different types of dyes that are quite suitable for decorating skirting boards

Choosing a product for foam baseboards

For foam and polystyrene ceiling moldings, you cannot use products based on acetone or white alcohol. These chemicals can dissolve the planks. So what is the best way to paint foam baseboards? For this type of decor, you should choose a product whose solvent is plain water. It can be water-based paint or water-dispersion paint.

Painting the ceiling plinth made of foam plastic can be done with water-based or water-dispersion paint

Tip: If you don’t find an option in the store that perfectly matches the color of the ceiling, you can paint the foam baguette with a white water-based emulsion to which color has been added.

Which product is suitable for polyurethane and plastic baseboards?

Now let's see how to paint polyurethane baseboards. Almost any product is suitable for such decor. Typically, for plastics and polyurethane (which is essentially ordinary foam plastic), oil-based or water-based paint is used. If you need a glossy surface, choose the first option. In order to get a matte polyurethane or PVC skirting board, you should use the second one.

Oil paint can be used to decorate polyurethane and plastic baseboards

Paint for wooden baseboards and MDF planks

How to paint a wooden baseboard? Almost any type of product is also suitable for it. It can be varnish or alkyd enamel. Oil and water-based, odorless paints are also used for wooden skirting boards and MDF planks.

MDF floor plinth for painting

How to choose a shade

What color should I decorate the slats in? Usually the plinth, both floor and ceiling, is decorated to match the tone of the main covering. Is it possible to paint the ceiling plinth the same color as the walls? More often it is decorated to match the color of the ceiling, however, this option is quite acceptable. In any case, it is better to choose an option that is slightly lighter than the main coating.

Usually the baseboard is painted to match the color of the ceiling

Note: When choosing a means to change the color of the planks, repeating the shade of the walls, you can make the room visually taller. If the color is the same as the flooring, the room will visually appear larger.

Painting MDF skirting boards

After installing the planks, we move on to painting them. To protect the wall finishes and floor coverings from accidental contact with paintwork materials, it is better to protect them with masking tape. It wouldn’t hurt to also cover the floor with a film to prevent accidental drops.

Wear gloves on your hands.

MDF planks are a porous material by nature, so they require a little preliminary preparation of the surface so that its fibers do not rise when painting. This can be eliminated by sanding the surface with fine sandpaper to remove lint.

Then the primer composition should be applied twice. The second layer of primer is applied after the primary layer has dried 100% and has been sanded again. As a result, you will receive a high-quality surface for applying the selected paint and varnish.

We will paint with a brush - select the size based on the height of the MDF fillet. Paint in a thin layer to avoid smudges. We wait for the paintwork to dry and repeat painting the planks a second time.

Alternatively, the fitted planks can be painted prior to installation. All preliminary steps to prepare them for painting are the same, but you can paint them with spray paint - everything is at your discretion.

Dyeing technology

We figured out what paint to paint the ceiling or floor plinth. Next, we will consider the actual features of the plank processing technology. First of all, you should decide when you will decorate the elements - before installing them in place or after.

How to paint ceiling plinth. Decoration can be done both before installing the planks in place and after

In the first case, painting can be done without the risk of staining the wallpaper. Most often it is recommended to use this method. However, painted ceiling or floor decor in situ may not look particularly neat. The fact is that in this case the joints treated with putty will become noticeable. So, if you wish, you can decorate the planks even after they are installed in place.

Important: If there are any defects on the floor or ceiling edging decor, they must be removed before decoration. Fill all scratches and wash off any dirty stains. Wooden and foam options should be pre-primed.

Before painting, the baseboard should at least be wiped down

How to paint a floor plinth

Wooden or plastic decor is most often used to finish the floor. If you decide to carry out the treatment before installing the planks in place, you can use a sprayer. On the wall, the plinth to be painted is passed with a brush (the width of which should be less than the width of the planks). Move it along, thoroughly rubbing the product and preventing drips from appearing. Usually two layers of paint are applied.

When processing planks, the paint should be rubbed as thoroughly as possible.

How to paint a baseboard with acrylic paint yourself

When creating a beautiful interior, it is important to take into account every detail and little thing. For example, the walls, ceiling and floor will not look like a complete composition if you do not pay due attention to the design of the baseboards. In this article we will tell you how to paint a baseboard.

What paints are suitable for finishing baseboards?

The paint for the baseboard should be chosen taking into account the material it is made of. For example, if you want to paint a wooden baseboard, you can use a simple stain. It will saturate the wood, protect it from moisture and microorganisms, but will not hide the natural texture and pattern. The same goes for alkyd-based clear varnishes. Oil paint in this case is considered not the best option due to long drying time, unpleasant odor and short service life.

To paint a plastic baseboard, it is best to use acrylic compounds. The only peculiarity of the finishing of such material is the method of applying paint - for this it is most convenient to use aerosol cans. The brush leaves streaks on the smooth plastic surface that look sloppy.

How to paint foam baseboards? There are a number of different formulations for this purpose:

Water-dispersion paint is an inexpensive, economical and environmentally friendly material, suitable for both polystyrene foam and polyurethane. Its main advantages are accessibility and ease of application. The downside is that it is not resistant to moisture. You cannot wipe the baseboards with a wet cloth, otherwise the paint will wash off.
A good composition option that can be used to paint foam ceiling plinths is water-based acrylic paint. It is also not very expensive, it has a rich color palette and is resistant to humid environments. The baseboard painted with this paint can be wiped with a damp cloth.
For rooms with high humidity levels, paints with latex filler are best suited. They do not fade for a long time, create a very durable film that does not crack, does not allow water to pass through, and is not afraid of sudden changes in temperature. Latex compounds are good for painting baseboards in kitchens and bathrooms.
Silicone paints are considered even more resistant to negative environmental factors. They have enviable durability, but are also expensive.

Features and advantages of acrylic paints

Since our article will focus on painting baseboards with acrylic compounds, let's figure out why you should use them.

Acrylic paints are distinguished by good adhesive properties, low water absorption and environmental friendliness. They are safe for human health, since the base solvent in them is water.

On the construction market, compositions are presented in a huge number of shades. You can find bright or pastel colors of any range, and if you decide to paint the ceiling plinth with gold-colored paint, you can easily purchase one.

Acrylic compositions are suitable not only for interior work, but can also be used for exterior decoration. They can be applied to many surfaces, for example, concrete, plastic, plaster, wood, polystyrene foam. Such paints can even adhere to metal if it has been previously coated with a primer. You can finish surfaces previously painted with enamels, oil or water-based compositions.

Working with acrylic paints is easy; during the finishing process you can use brushes, rollers or a spray gun. When drying, the material creates a durable film on the surface that protects the metal from damage, rotting, and corrosion. This film is not afraid of moisture, ultraviolet rays, high and low temperatures.

The versatility of acrylic paints allows them to be used almost everywhere: in any room and on any surface. Here is a list of the main advantages of such compositions:

The high elasticity of the film that forms on the painted surface prevents it from cracking under the influence of temperatures and physical influences. The paint creates a strong and very durable coating that lasts 15-20 years.
During the entire operational period, the material does not lose color and attractiveness. The reason for this is the paint’s resistance to ultraviolet rays.
The ability to withstand extreme heat and frost allows the material to be used in outdoor work.
It is very easy to care for the painted surface. Since the paint is not afraid of water, dirt can be washed off with a wet cloth. It is worth noting that acrylic paint is not afraid of many chemicals, so during the cleaning process you can use different detergents.
The painted surface turns out beautiful, neat, has a pleasant glossy shine and smooth texture.
The application process itself does not require complex skills. The composition is easy to use; to paint the surface, you can use the tool most convenient for you.
Acrylic paints adhere well to almost any surface, dry quickly, and do not have a strong unpleasant odor. They are environmentally friendly and fireproof.

Why do you need to paint the baseboard?

Skirting boards, both floor and ceiling, should be painted for many reasons:

If the product is made of foam plastic, it is highly susceptible to damage. Often, defects can be discovered immediately after purchase, since even in conditions of not very careful transportation, small scratches, dents, etc. remain on the material. In bright light, such defects are very noticeable, and paint will help hide them.
Foam skirting boards are standard white. If the ceiling is light, the baseboard looks appropriate. If the surface is painted in any shade other than white, then the plinth will stand out against its background.
The structure of the foam is loose, in bright light they are slightly translucent, and this is not very beautiful. Paint will make the products more neat and aesthetically pleasing.
Foam skirting boards turn yellow or darken over time due to dust embedded in them. Of course, this is unsightly, and against the background of a white ceiling such edging will stand out unfavorably. A layer of paint will protect the product from such consequences.
Dust that has settled on the painted surface can be easily wiped off or washed off. An unpainted foam baseboard cannot be completely cleaned due to its porous structure.
During the installation process, joints are formed between the fragments of the plinth, which, it must be said, are very noticeable in bright lighting. In order for the baseboard to become a neat and seemingly monolithic part, the joints must be sealed and then the entire surface must be painted.
Wooden baseboards need painting no less than foam baseboards. Wood in general is a very capricious material. It is susceptible to rotting, does not like moisture and water, can be deformed from drying out, and damaged by parasites. A coat of paint will help protect it.
Painting skirting boards has not only practical, but also decorative purposes. For example, even the most expensive and luxurious stretch ceiling will not look elegant and noble if the ceiling skirting boards are not painted.

You can decorate the baseboard both before and after its installation. When is better is a controversial issue. It’s most convenient to paint the product before installation, because then you won’t have to climb on a stepladder and stand there for hours with your head up. You also won't have to worry about how to paint the ceiling plinth without staining the walls. The disadvantage of this method is that after installing the skirting boards, joints will be noticeable between the fragments. They will have to be painted separately later, and this can lead to different shades.

The second option is finishing the baseboards after their installation. Technically it is more difficult and requires more time and labor. While working, you need to be careful not to get paint on the walls or ceiling. But in this case the surface of the skirting boards will have a uniform and identical shade, the joints will not attract attention.

If you decide to paint the ceiling and baseboards the same color, do it at the same time and before you start finishing the walls and floor.

The process of painting baseboards with acrylic paint

Before you paint the baseboards on the floor or ceiling, you need to prepare for work. The paint will ideally lie only on a flat surface, and to make it so, you need to putty dents, scratches, and other damage. The joints should be sealed and leveled. Putty is selected in accordance with the material. Any fine-grained finishing composition or silicone sealant is suitable for polystyrene foam. For wood, it is better to choose a special wood putty.

Preparatory work can be described as a sequence of stages:

Prepare the putty, a container for diluting it, a soft sponge or rag, a bowl of water and a small flexible rubber spatula.
Apply a little compound to the tool and cover the defect or joint by running a spatula along the seam. Press the tool firmly against the surface, but without excess pressure.
Use a damp sponge or rag to wipe off excess material.
To seal the joints in the corners, you can do without a spatula and apply the solution with your finger - it’s more convenient. Just before doing this, you must put a glove on your hand.
In this way, not only seams and dents are sealed, but also gaps between the baseboard and the adjacent surface: floor, wall or ceiling.
After a while, the solution should dry, after which it is sanded with fine sandpaper.

The sanded surface can be painted.

The paint is applied to a previously cleaned surface. It would also be a good idea to coat the baseboard with primer.

The painting technology itself depends on at what stage you decided to do such work. If the baseboard has not yet been installed, the easiest way to paint it is with an aerosol can or spray gun - then the composition will lie more evenly, the color will be uniform, and there will be no strokes on the surface. Before such work, you need to lay film or newspapers on the floor. Then, placing the plinth vertically and holding it with your hand, cover the product on all sides with an even layer of paint. If you don’t have a spray gun, you can do the same with a brush. Then install the baseboard in the same vertical position until it dries.

If you decide to paint already installed baseboards, you need to do it carefully. In order not to stain the adjacent surfaces, you need to stick masking tape on them along the entire baseboard. In such work it is inconvenient to use a spray gun, so you will have to use a brush or a small roller.

Some people are afraid of ruining already pasted wallpaper with masking tape. In this case, a flat plastic sheet can be an alternative. You need to hold it with your hand near the area to be painted, and apply paint to the baseboard with your other hand. In this way, the skirting boards are processed over the entire surface.

To get a more uniform shade, it is advisable to apply the paint in 2 layers. Before this, the first layer must be allowed to dry.

How to paint polyurethane plastic?

Plastic can

water-based polyurethane acrylic paints. Conventional, without giving a matte effect, these compositions are used for painting large surfaces.

Interesting materials:

How to install an ID touch on Privat24 on an iPhone? How to put a track on an iPhone? How to install WhatsApp on iPhone 4? How to install a second line on iPhone? How to install whatsapp on iphone 4? How to put notes on iPhone? How to record a call on an iPhone? How to block incoming calls on iPhone? How to set the charge percentage on an iPhone? How to set a call to an iPhone alarm?

2021
Scroll up

Peculiarities

This type of decor has its own unique advantages, disadvantages and features of use.

The disadvantages are as follows:

During installation, all the unevenness of the walls will become visible, due to the fact that, unlike other types of similar decor, this one is very difficult to bend
The width of such decorative elements is very small. For example, foam plastic is much wider
The process of installing the ceiling, using only these parts to fix it, will be quite complicated - the last part falls into place very difficult. This does not apply to detachable types of fillets.

But there are also advantages over conventional types of such decor:

Plastic is easy to clean
Unlike polystyrene foam, it does not turn yellow over time
With a plastic ceiling it will create a more complete picture than other types of finishes
It cannot be repainted

The rest of the features aren't that important. Unless they are installed mainly using screws, self-tapping screws or nails. The glue may not hold.

Paint for baseboards: from choice to painting features

When completing renovations in a room, floor or ceiling moldings are always applied. There are a large number of them in stock and all of them can be painted in the required order. But before you learn how to paint a skirting board, we recommend that you understand the existing options and decide on the required type of coating for the planks.

Types of skirting boards based on material of manufacture

Manufacturers offer a large number of models of skirting boards. They definitely need to be painted, since during use the moldings lose their attractive appearance and their natural color disappears. Moreover, unpainted floor linings are also more susceptible to mechanical stress. Let's look at the existing types:

Styrofoam. It is considered one of the most fragile, so it must be painted. Sometimes they even do this in two or three layers to give the surface a greater degree of rigidity. The color of this plinth from the manufacturer is not perfectly white, so they try to paint it to obtain a purer shade.
Polyurethane. Linings made from such raw materials will cost more, but they are somewhat more reliable. Than foam models. Even though they are sold in white, it is still recommended to paint them to prevent the surface from yellowing over time.
Duropolymer. High-quality new material, although it is not widespread, nevertheless also needs painting. All paints that are suitable for polyurethane and foam baseboard models are also compatible with duropolymer ones.

Next, let's talk about the paints that are best used to achieve the ideal coloring result.

Options for paint compositions for skirting boards

Basically, for painting any types of skirting boards, compositions that are a water dispersion are used. There are several varieties, details of which are below.

Water-based

A water emulsion is a type of paint that is made on the basis of several components: pigments, polymers and water itself. Ideal for painting foam plastic and other types of baseboards, it is capable of hiding seams that remain visible after installation. As a result, after drying, the painted surface obtains a smooth structure.

Polyvinyl acetate

High-quality popular version of the material. Widely used to give a completed appearance to polyurethane and other types of baguettes and baseboards. It is recommended to use this paint only in dry rooms: that is, it is not suitable for kitchens and baths. Also, the finished coating is susceptible to wet cleaning, so removing dust on baseboards painted with polyvinyl acetate paint should be done with a dry rag.

Acrylic

This composition is compatible with any type of coating and can be pigmented using individual, ideally selected colors. Usually sold in finished white. The dried coating can be wiped with a slightly damp cloth. But it is forbidden to rub the surface intensively, as there is a risk of wiping off the applied layer. Acrylic is fade resistant, so in most cases just one coat is sufficient.

Latex (rubber)

Another popular type of coloring composition. From the moment it dries on the baseboards, it contributes to the formation of an elastic protective film, which is similar in properties to rubber, is considered waterproof, and therefore can be cleaned wet.

Aerosol

This is spray paint for baseboards. This option is often used for skirting boards with an interesting design that requires careful design. It is inconvenient to paint such planks with a brush and there is a risk of applying too much finishing material.

Deciding on the number of layers

When you have figured out the options for paints that are acceptable for use, you should pay attention to such a thing as the number of layers. You need to resort to solving this issue when you have decided on what intensity of shade you want to get. Also, the number of applications depends on the type of paint for floor skirting boards.

On a note! In the description of paintwork materials directly on the packaging there is usually information about the recommended number of layers to be applied to each type of surface.

Remember, if you try to apply more paint at one time, so as not to do two or three layers, it will not help. Streaks will appear, which, after drying, will stand out against the background of the entire baseboard.

If a brush is used for painting, then when applying several layers, try to apply the paint in different directions. This way, all unused areas and gaps will definitely be hidden.

When and how to paint skirting boards depending on the situation

When the need arises to paint baseboards, people often ask when it is better to paint them before or after installation. Here it is important to pay attention first of all to the type of baseboard. That is, if it is embossed and has a design that repeats along the length, then it should be painted over before installation and wait until it dries completely and only then install it.

In case the owner plans to paint the floor molding in the same color as the walls, then it is advisable to first fix it and then use a roller to paint both it and the wall at the same time.

Assembling the baseboard on the floor before painting Source fastbox.su

If the situation is like this: the repair has already been done, all the necessary finishing materials have been applied, then the baseboard is installed unpainted or pre-painted in one thin layer and dried.

On a note! In the latter circumstances, it is rare to cover the molding before installation, since during its installation the seams must be puttyed and further sanded to achieve a smooth surface. With this treatment, the previously painted layer will still be wiped off and will have to be reapplied.

Rules for painting skirting boards after installation

It's time to learn the rules that will help you paint plastic baseboards and any other types of moldings indoors. The whole process is based on several steps:

First, prepare the necessary equipment and materials. You will need rollers of different sizes, a tray, brushes, the directly selected type of paint and color for it, if necessary. Be sure to select high-quality masking tape and any intact plastic film.
Next, the film is spread on the area that will be painted first. Polyethylene is adjacent to the base of the baseboard as much as possible. Then glue it to the floor with masking tape to avoid movement. The part of the wall above the baseboard is also sealed so as not to smear the surface when painting.
The next step is to take a small amount of paint and pour it into a tray, add color if necessary and mix thoroughly. Afterwards, apply a small amount of paint onto a small roller or brush, and blot off the excess on the edge of the tray.
Apply the first layer by horizontal painting and leave until completely dry. They try to go around the baseboards around the entire perimeter of the room. Then leave until completely dry.
Now apply another layer of paint and so on until the desired result is achieved.

Please note that each new layer is painted in the opposite direction. That is, if the first one was applied horizontally, then the next one is painted vertically. In this way, alternation is carried out until painting is completed.

What to do if the paint doesn’t adhere well

Many people are faced with the problematic question of how to paint the baseboard if, when trying to paint, the material simply rolls off. In this case, the basis needs to be prepared.

To do this, it is coated with a primer with good adhesion properties. The composition is selected depending on the type of paint that will be applied to the floor moldings. After applying the adhesive compound, the baseboard is left to dry.

Video description

How to paint the baseboard correctly.

Conclusion

This article describes all the points regarding the question of how to paint baseboards in a house. It is important to take them into account and follow the sequence of actions when painting in order to achieve a good result that will highlight the interior of the room.

How to paint a floor plinth

Types of skirting boards for painting

There is currently a huge range of materials for skirting boards, but we will consider only those types that need to be painted.

Wooden

An environmentally friendly building material, strong, resilient, easy to maintain, durable, and has a respectable appearance. They are installed mainly on parquet, wood and in dry rooms.

It is made from compressed wood fiber and is mounted mainly on laminate, linoleum, and other floor coverings. Beautiful, does not fade from sunlight, environmentally friendly, resistant to pollution, easy to clean, easy to care for, but fragile from a strong impact, inferior to wood in terms of durability.

Manufacturers offer ready-to-install MDF products or unpainted planks, the color of which you can choose and paint yourself.

Before considering how to paint a floor plinth, let’s decide on the range of paints and varnishes for this work.

Paint for floor skirting boards

When applied, alkyd paints (enamels) form a durable and dense water-repellent film on the surface that is resistant to mechanical damage and detergents.

Installation of plastic elements

Before installing decorative elements around the perimeter of the ceiling, you should take all the necessary measurements and create a drawing. After this, you can apply markings to the walls and cut the plastic ceiling plinth into pieces of the required sizes.

The edges of the plinths are cut at an angle of 45 degrees, the next plinth is cut in the same way, but in the mirror direction of the angle. This cutting method will allow you to connect all the elements of the decorative structure joint to joint, avoiding the appearance of cracks and gaps between them. Visually it will look like a solid structure between the ceiling and the wall.

If, when gluing the skirting boards to the wall, gaps appear under the ceiling, you can insulate them with silicone sealant and putty. Painting of decorative elements should be carried out before installation, as well as cutting.

To install plastic parts, you can use liquid nails or other adhesives. The plinth should be glued to the wall and not the ceiling, so it will not only stick better, but will also not damage the surface of the ceiling.

How to paint a foam baseboard: how to paint it, tips for choosing paint, painting procedure

Foam baseboards are usually used to decorate ceilings. It is attached under the ceiling covering itself and decorates the joint between the wall and the ceiling surface, giving a complete look to the room. However, some craftsmen and craftsmen prefer to use such a plinth to decorate the joints between the wall and the floor, because foam plinth is an inexpensive and easy-to-use material. But quite often those who make repairs are faced with a situation where the color of this product does not match the color scheme of the interior. How to paint a foam baseboard so that it blends in with the decor?

How to paint foam baseboard

Why paint the baseboard?

Some who read this article may ask a logical question - why paint such a skirting board at all, when you can buy a regular plastic one, which has a lot of colors, and install it? In fact, the interior of a room can sometimes have a rather unusual color scheme and choosing the appropriate shade from the existing ones simply won’t work. Sometimes you simply cannot find a skirting board of the desired color; this problem especially often arises in small towns with a modest market for construction products. Not everyone is ready to wait for such a plinth to be made to order, either, so they decide to paint it.

Foam plinth is easy to use, inexpensive, and even if some problems arise with painting, you can simply throw it away and buy new experimental samples - you won’t be sorry for the money spent.

Foam plinth opens up wide possibilities for its design - you can create quite unusual products that will easily become the highlight of the entire room and will undoubtedly attract the attention of guests. Also, sometimes ordinary floor skirting boards have a boring shape, while ceiling foam moldings are distinguished by their refined shapes.

Foam ceiling skirting boards

On a note! Installing a baseboard is usually the finishing touch to decorating a room. Without it, the interior will look unfinished. Therefore, you should not neglect their installation.

There are other reasons why some craftsmen decide to paint the baseboard:

A plinth bent using cuts can also be painted.

the paint can also hide the joints between the baseboards - then you get a monolithic-looking edging of the room. But so that they do not catch the eye, all products will have to be coated with a paint composition;
paint also helps protect the baseboard from rapid loss of appearance, to which foam baseboards are prone. Over time, it wears out in any case, loses its former whiteness and looks ugly.

On a note! You can paint almost any skirting boards made from various materials. And the reasons for painting them are the same as for foam baseboards - protection from wear, decoration, design in accordance with the design of the room, etc.

Painting wooden baseboards

When is the best time to paint the baseboard?

Applying masking tape before painting

Skirting boards can be painted after installation. The procedure will be more complex and painstaking, but the paint (if even slight bending of the product is necessary due to uneven walls) will not crack. However, in this case it is important to protect the walls and floors from paint. The result will be much better.

Installation of foam floor plinth

Types of paints used for this type of work

Choosing the right paint composition is the key to accurate and durable work. Therefore, you should not buy the first paint you come across; it is better to first carefully study its composition and decide whether it is suitable for painting foam plastic. The paint composition should contain only water as a solvent.

How to paint the baseboard

Attention! For painting foam products, including baguettes, only those compositions that do not contain acetone and other similar solvents are used. This substance can simply melt the foam.

Table. Types of paints for painting foam baguettes.

How to cut a plastic skirting board

Installation of plastic skirting boards inevitably involves the need to cut and form beautiful joints in the corners. The overall quality of the entire work and the appearance of the room where the renovation is being carried out will depend on how the plinth is joined. Read more in this article on our website.

Which paint to choose?

You need to select paint for painting foam moldings after clearly assessing the operating conditions of the finished products. That is, you should not buy compounds that are afraid of water for skirting boards that will be installed in the bathroom. So it all depends on where the products will be installed.

White baseboard goes well with gray walls

Advice! If the store does not have the paint color you need, you can purchase a regular white composition and add a color of a suitable shade to it.

To paint skirting boards that are not installed on the wall, you can buy paint in aerosol cans - working with it is convenient and quick. But for products already fixed in place, you will need to use canned paint and a regular brush. Otherwise, there is a risk of staining the floors and walls with the paint composition.

Application of aerosol paints

Features of the work

Plastic skirting boards, like any other surface, must be primed before painting. In this case, the paint consumption will be less (the baseboard is made of plastic - the material is porous), and it will lie much neater and smoother. By the way, the products can be primed even before cutting and fitting to the installation sites.

Another example of painting a floor plinth

If you need to paint a baseboard that has already been installed, then cover the walls and floor around it with masking tape. This measure will avoid damage to surfaces by paint. It is unlikely that without adhesive tape it will be possible to carefully decorate the glued-on baseboards even with the thinnest brush.

Attention! Don't use regular tape! It will leave sticky marks on the floor that are difficult to clean, and it can tear off wallpaper from the walls when removed.

By the way, during painting you can protect the walls and floor without using tape. In this case, a wide spatula is used, which is applied to the joint between the baseboard and the wall to protect the surfaces.

White foam plinth in the interior

It is advisable to apply paint to the baseboard in two layers - this way the surface will be painted better. However, the second layer is applied only after the first has at least partially dried. If you apply a lot of paint at one time, then there will be unpleasant streaks on the baseboards. When applied, the paint should rub well and spread over the surface. And it is applied with long and smooth strokes.

Advice! It is not advisable to use a newly purchased brush of poor quality to paint baguettes. Such a brush may leave bristles on the surface of the paint, which will ruin the appearance of the product if it is not removed. And this is unnecessary fuss during work.

Paint brushes

It is worth remembering: newly opened paint that is in a container looks somewhat brighter than the same paint that has already been applied and dried. And this aspect is important to consider when choosing the shade of the composition.

On a note! Before painting, the plastic plinth can be covered with plaster using a fine mesh. This measure will make it very durable.

Place a rubber band around an open paint can to wipe off your brush.

Preparing for coloring

Before you start painting the baseboards, you should prepare. To get started, it is recommended to purchase all the necessary materials:

Preparing the necessary tools

The baseboards themselves also need preparation for painting. To begin with, they are wiped with a damp sponge to remove dust and greasy stains. Also, if the baseboards are already installed, all joints between them are carefully sealed with putty using a small rubber spatula. In this case, you need to move from top to bottom in the direction of the seam. The curves of the baguette are repeated. After drying, the putty surface is sanded with sandpaper. In the same way, it is recommended to seal the joints between the wall and the baseboards. If necessary, putty can also be used to seal defects on the baseboard.

Advice! It is best to apply paint using a respirator to avoid inhaling harmful fumes. Gloves are used to protect hands.

Respirator for protection against odors when coating with varnishes and paints

The procedure for painting foam baseboards

Let's look at how the process of painting foam baseboards already installed on the walls occurs.

Step 1. The necessary preparatory work is carried out. Skirting boards are cleaned of dirt, puttied and primed. Only after this the painting work begins. First you need to open a can of paint, mix the composition well and, if necessary, add the color of the desired shade and in the required quantity.

Step 2. Next, prepare masking tape - it is necessary to protect surfaces not intended for painting from paint. Floors can also be additionally protected with a covering film.

Step 3. Painting tape is glued to the wall along the top of the baseboard so as to cover it right next to the installed product.

Applying masking tape to the wall

Step 4. A covering film is laid along the wall on the floor, and the lower joint between the baseboard and the floor is also sealed with masking tape.

The bottom joint is sealed

Step 5. For ease of work, paint is poured into a special tray or cut-off bottle, into which the painting tool - brush, roller or other devices - will then be dipped.

Paint is poured into a tray

Step 6. The painting device is dipped into paint, the excess of which is removed by scraping it off on the edge of the tray. The paint is carefully applied to the baseboard. It is recommended not to go beyond the boundaries of the area to be painted, even though the surfaces are protected with tape and film.

Applying paint to baseboards

Step 7. After the paint has dried, the masking tape is removed. It is recommended to wait at least 4 hours before removing the adhesive tape.

At the end the tape is removed

If painting is done before fixing the baseboard to the wall using aerosol paint, then the product is placed on a film spread on the floor. Shake the can well before use to mix the paint. The composition is applied from a distance of at least 20 cm - only then will it be possible to avoid drips. After finishing the work and drying the paint layer, the surface of the plinth can be coated with varnish - it will protect the paint from rapid abrasion.

Video - Painting glued foam baseboards

Aerosol paint prices

spray paint

Video - Decorating foam baseboards

Adviсe

A few tips will help you do all the work quickly, efficiently and with the least risk of making mistakes:

paint from cans goes on smoother, so it is recommended to use it;
if paint gets on the wallpaper, it is important to remember that the water-based type of composition is easiest to remove;
work must be carried out only using high-quality materials, otherwise the skirting boards will quickly lose their beautiful appearance;
the roller is used only for painting wide baseboards;

The roller can be used to paint wide baseboards

only if several layers of paint are applied will the coating be of high quality;
if the color of the plinth matches the shade of the walls, then the height of the ceiling will visually increase;
if the color of the baseboard matches the shade of the floor, the room will look more voluminous;
You can’t rush while doing the work, otherwise you can get everything dirty and ruined.

Don't rush when painting

The job of painting skirting boards is not the most difficult, but it requires special attention. Otherwise, there is a risk of hopelessly ruining the materials and appearance of the room. Therefore, there is no need to rush, and it is important to apply the paint carefully and carefully.

How to paint a baseboard

Everyone wants to improve their life, at least to a small extent, including making their home more comfortable.
Even little things influence the appearance of your home. Owners who pay special attention to the interior want their creativity in their property to be appreciated by guests. But sometimes the same little things do not significantly complete the original idea of the desired impression. Often in design, decorative finishing material - skirting boards, which also require maintenance - is used to hide the corners between the wall and the ceiling/floor. If you decide to change the color of the baseboard or simply refresh it, then thanks to a few rules you can handle it yourself.

If you need to paint the floor as well, it’s better to start with the baseboard, then apply paint to the edges of the floor, and so on. It is wise to choose the color of the floor plinth to match the color of the floor, and the color of the ceiling plinth to match the color of the ceiling. This will help visually expand the space of the room. If you want to add height to the walls, then paint to match the wall covering, but only under one condition: if it is plain.

If we talk about fashion, the current trend is to paint the baseboard in the color of the doors, which allows you to create the effect of an extension of the door and focuses attention on its beauty.

The design is noticeably refreshed by white baseboards. You can experiment with colors, but don't use more than two.

The choice of paint depends on the material from which the baseboard is made. As a rule, professionals use water-dispersion, latex, and acrylic paints. They dry quickly and have virtually no odor. It is best to look in stores where the paint can be tinted, that is, by mixing white and the exact amount of color, you can get the desired color; for this, take a sample with you. The paint can be sold in spray cans, which will allow you to complete the task accurately and quickly, without streaks.

— Ceiling plinths (fillets) are made of polystyrene and polyurethane due to the required lightness.

— Plastic skirting boards can only be painted with paint that does not contain substances that can corrode it. For example, you can coat it with enamel or alkyd enamel, after applying an adhesive primer.

-The floor plinth is made of wood or MDF, which has all the advantages of wood.

It is better to take small brushes. If the baseboard has a complex pattern, purchase a hard stencil brush.

Take everything you need to paint the baseboard:

An indispensable attribute for a painter is a scraper - you will also need it for greater accuracy. To be absolutely sure of the safety of the floor, you can use masking tape or other handy materials. You also need a rag to wipe the scraper, which should be used often to prevent the paint from smearing.

Wipe the baseboards from dust - they should be clean. Apply the primer for 2-3 hours and start painting. The brush should be held parallel to the floor, and the scraper should be placed under the lower edge of the baseboard and moved along with the brush. Craftsmen advise applying the paint carefully, slowly, in two thin layers, then the work will be of higher quality and have an attractive appearance than a hasty thick coating. An unmounted plinth should be painted not only from the front side, but also from the end.

Don’t be afraid to experiment with the interior and be creative about it, because home is a reflection of our inner “I”.

Advantages of PVC skirting boards:

Water resistant. Not exposed to water, does not swell, does not rot. And, therefore, it can be successfully used in the bathroom and kitchen.
Allows you to hide wires. It is in the PVC structure that electrical wiring can be laid. Neither wooden, nor polyurethane, nor gypsum baguettes provide such opportunities.
The presence of PVC ceiling molding connecting elements (joints, corners) simplifies the installation process.
PVC plinth is also good as a decorative plinth. It comes in both color and imitating various structures - wood, cork, stone, metal.
Price-quality ratio. The cheapest option, of course, is polystyrene foam, and the most expensive is plaster and wooden molding.

Do not forget that each material also has disadvantages.

Firstly, PVC baguette is not temperature-resistant - heating elements, as well as negative temperatures, are contraindicated for it.
Secondly, this plinth is not flexible enough to frame uneven walls or ceilings - it requires a flat surface.
Thirdly, the color version also carries a catch - PVC construction cannot be painted, like, for example, plaster.

Overlay type plinth

This type of decorative elements is fixed on the surface as follows:

Using special devices, cut the edges of the plinth at an angle of 45 to the front side.
An adhesive composition is applied to the inner surface of the product.

PVC plinth for the ceiling is applied to the surface and pressed along its entire length.
It is recommended to immediately remove excess glue formed when pressing on the product with a soft cloth.
The plinth is left until the adhesive composition has completely dried, after which the joints and cracks are sealed with silicone sealant or a corner is installed for the PVC ceiling plinth. If you make the corners yourself, you need to know how to make corners on the ceiling plinth so that the joints are even.

Peculiarities

Modern ceiling plinths, made of unpretentious PVC, have gained great popularity for good reason. Such products are characterized by many positive properties that are so necessary for ceiling structures.

Ceiling plinths made of polyvinyl chloride are moisture resistant. High-quality PVC itself is completely immune to the harmful effects of dampness and moisture, so it can be safely installed in rooms where there is a high humidity level. Household members will not have to worry about the safety of plastic components, because they will not fail, even if the surrounding area remains wet all the time.
Modern plastic moldings go well with plastic panels that are used to cover the ceiling base. In combination, the ceiling design looks like a single whole, and the separation between panels and skirting boards remains almost invisible. For such finishing, polyvinyl chloride moldings are the ideal solution.
In stores you can find PVC ceiling skirting boards, presented in a wide selection of colors and shades. The most popular and widespread, of course, are the classic snow-white specimens, but if you wish, you can find other, more interesting colors.
The components in question do not require complex and expensive maintenance. In order for the surface of plastic skirting boards to remain clean and look neat, the owners only need to wipe it with a damp cloth from time to time. It is advisable to carry out such procedures regularly, because over time, plaque may appear on the material, which will be very difficult to get rid of.
Buyers are attracted to such products by their affordability. Skirting boards made of polyvinyl chloride are one of the most inexpensive components and have an affordable price.
The components in question are easy to install. Almost every home craftsman can cope with their installation in the ceiling area - there is no need to call a specialist.

Polyvinyl chloride skirting boards have not only advantages, but also certain disadvantages, which the consumer should be aware of before purchasing and installation.

The most significant disadvantage is the modest size of such parts. Wide ceiling moldings are simply not produced, so owners have to adjust each component as accurately and scrupulously as possible and leave gaps of certain dimensions.
If the surface of the base is uneven, after the fastening is completed, gaps will remain noticeable between it and the fillets themselves.
Despite the fact that skirting boards are simple and unpretentious to install, installing the last ceiling panel can be quite difficult. To do this, the master is forced to once again bend the polyvinyl chloride part, and then push the “spare part” with force. Because of this, it can be easily damaged.