Garage interior decoration, popular materials for floors, walls and ceilings

Disadvantages noted:

• reduction of usable space;
• inability to hold fasteners of hanging elements;
• the appearance of insects and rodents under plasterboard structures.

The main disadvantage of PVC panels is fragility.

How to decorate the garage? You can use banner fabric . This is a composite material, durable and elastic at the same time.

An opaque laminated banner fabric is used (polyester fibers are covered with PVC film). Used for cosmetic renovation of previously plastered walls without obvious defects. To fasten the cladding, nails and dowels are used.

Advantages:

• hides the old finishing layer;
• washes well with warm water;
• not susceptible to temperature changes;
• does not require finishing coating;
• characterized by low cost.

Minus: lack of thermal protection properties.

Finally:

• the choice of material and method of interior decoration always remains with the garage owner;
• It is important to remember that for this space, visual appeal should not be compromised at the expense of safety and practicality.

Finishing materials: 6 operational requirements

The modern construction market is overflowing with a variety of finishing materials, with a wide range of prices and characteristics. When choosing how to decorate the inside of the garage walls, it is important to remember that the garage is a technical building, therefore the cladding is selected in accordance with its specific use. Materials intended for interior decoration must meet the following operational requirements:

• Mechanical strength . The coating of walls and ceilings must be as resistant as possible to mechanical loads of any type, both impacts and deformations (weight loads).
• Resistance to chemical agents . A garage is a place for storing and using a variety of fuels and lubricants (fuels and lubricants) intended for car repair and maintenance. Most of them (acids, oils, lubricants, fuels) are chemically active compounds and dirty the floor and walls more often than we would like. Resistance to chemical influences is an important condition for choosing a material.

The garage is a place to store a variety of auto chemicals Source me.ayokonseling.com

• Fire resistance . Most products used to service a vehicle are flammable. The logical step would be to choose the most fire-resistant cladding.
• Resistant to temperature fluctuations . A particularly important parameter if the owner does not plan to install heating. In this case, the cladding will have to withstand repeated vibrations during one season, which not all materials can do.
• Easy to care for . Heavy contamination is not uncommon for a garage space, so weak absorption of dirt, auto chemical products and odors, as well as ease of care for the surface of the floor and walls (and sometimes the ceiling), become a valuable quality.
• Easy to update . It’s good if it is possible to update or additionally protect the wall material using paints and varnishes.

Finishing materials should not create problems during maintenance Source roomadness.com
See also: Catalog of garage projects presented at the “Low-Rise Country” exhibition.

No. 9. Varnish

If the garage was built of brick, then you don’t have to worry about finishing, but simply varnish the walls. This will give additional protection to the masonry. Among the advantages of this option:

Minuses:

The varnish can also be used for additional protection of concrete, plaster, and plywood.

The choice of material and method of its installation depends on many factors. This includes budget, availability of the material itself, the ability to do the installation yourself, personal preferences, and the need to carry out internal insulation of the walls. Therefore, think three times, take into account all the factors and only then make a choice.

Source

Wall decoration: choice of material

Despite the severe restrictions imposed on cladding, the question of how best to decorate the walls in the garage does not pose any great difficulties. There are a considerable number of materials that meet all the above requirements, allowing you to design a garage that is not only practical, but also aesthetically attractive. Garage walls can be lined using the following materials:

Ceramic tile

Ceramic tiles optimally suit the operating conditions in a garage; Among its positive qualities are the following parameters:

• Physical properties . Fire resistance, frost and water resistance.
• Durability . Tiled flooring can withstand high loads.
• Easy care . Ceramics can be easily cleaned from dirt by drying and using detergents (including compounds with abrasives).

Tiling Source stroyfora.ru

• Wide choose . The best option is clinker (especially for the floor) or porcelain stoneware, the number of varieties of which is almost inexhaustible. The choice is limited to matte (non-slip) material.
• Aesthetic appeal.

The use of ceramic tiles has its own characteristics:

• Weight . Ceramics is a fairly heavy material, so it is recommended to lay it on walls made of brick or concrete. The process of laying small piece material on cement mortar extends over time.
• Price of material and its installation . The main limiting factor when choosing garage interior lining.
• Possibility of savings . High-quality clinker can be used as a floor covering, and for walls you can choose budget ceramic tiles (or make the lower, more vulnerable layer from clinker, and the upper one from porcelain stoneware). Walls are often tiled to a partial height (1.5 m); above them they are plastered and painted.

Tiles of dark shades - a practical solution Source stroyfora.ru

Plaster

When deciding how to inexpensively cover the inside of a garage, car owners sooner or later settle on the idea of ​​plastering. The method attracts with its economy and speed of implementation, and the surface of the walls acquires strength, fire resistance and durability. When choosing this method, take into account the following features:

• Walls . Plaster adheres best to walls made of concrete, brick, and aerated concrete.
• Choosing a base . Preference is given to cement-sand based solutions.
• Coloring . After the plastered surface has dried, it is painted in the chosen color. It is recommended to use facade paints - they have dirt- and water-repellent properties, are easy to clean and are not susceptible to chemical agents.

The limitation of the method is the need for professional skills in its implementation. Otherwise, defects in the work will appear at the first significant temperature changes (swelling, peeling and cracks on the surface).

Finishing walls with plaster Source remontbp.com

See also: Catalog of companies that specialize in finishing materials.

Second-hand clothes, how to clean:

For many, second-hand clothes have become an excellent alternative to new items from boutiques: both cheaper and more exclusive, because you can find interesting models in second-hand stores. Just before you put on something from someone else’s shoulder, you should protect yourself from the negative influence of someone else’s energy!

Any thing, especially clothing, carries information about its owner. If you buy an outfit that was worn by a stranger, there is no guarantee that he was not sick or was not going through a bad period of his life. Perhaps someone else's energy will affect you: troubles will begin at work, in the family, and health problems. What to do?

Listen to a few tips on how to cleanse clothes of other people’s energy:

- you need to wash the item with the addition of two tablespoons of sea salt; - light the incense and pass it over the item several times so that it is saturated with its aroma; — you need to “ring” the thing, i.e. Take an ordinary bell or “wind chime”, which everyone who wants to improve the Feng Shui of their home should have, and ring it to your heart’s content. You yourself will feel when to stop. Finally, you can read a prayer or mantra three, seven or nine times.

Some bioenergy specialists advise not to wear something you just bought at a second-hand store, but to let it hang or lie in your closet to soak in your energy.

Paneling

A popular method of interior finishing is paneling; it makes the room attractive, gives it a lived-in look and is ideal when thermal insulation is needed. When you know how you will use the garage space, choosing a material becomes much easier. If your garage will combine the functions of a service station and a workshop, you will need corrugated sheeting with its strength and non-flammability. If you plan to carry out only simple maintenance yourself, you can opt for PVC. If the garage is a place for restoring mental strength while simultaneously polishing an iron friend, there are no restrictions on the choice of material. The garage is finished using the following types of panel materials:

Cladding with PVC panels

Interior decoration of walls and ceilings with PVC panels is widespread and suitable for many owners of permanent garages; its advantages include the following qualities:

• Availability . Nice price/quality ratio.
• Physical properties . The material is moisture resistant and does not require additional processing (painting).

Panels for every taste Source th.decoratex.biz

• Easy installation and unpretentious maintenance.
• Light weight . Covering the gate with plastic does not increase the weight of the gates and does not load the hinges or frame structure.
• Using a frame to attach panels. It can be used to insulate a building, for example, with slab mineral wool.
• Cheap repairs in case of damage. It is easy to replace one part without disassembling the entire structure.

The disadvantages of using vinyl siding as garage trim include:

• Low mechanical strength . When hit, the panel is easily deformed.
• Sensitivity to temperature changes . You can purchase more reliable (and expensive) panels for facade work or special ones for the garage. This material is designed for the fact that the garage is most often not heated, and therefore has improved characteristics.

Garage interior

The optimal design of a garage should not only be visually attractive, but also convenient for its owner. Various decor and all sorts of little things would be out of place here. To emphasize your individuality and create a pleasant environment for your stay, you can decorate the walls with posters, placards, and tool stands. Minor details should not take up much space.

After completing your garage renovation, it is important to keep it tidy. The ease of use will depend on this

In a cluttered room it will be difficult to find the things you need. To hide open shelves and racks from view, use tarpaulin screens or water-repellent curtains. To quickly sweep away debris, it is necessary to provide special holes on the shelves.

Video description

About a non-standard approach to the design of tiled walls in the following video:

Wooden lining

The main raw material for the production of natural lining is coniferous wood, usually pine. This material is cheap, easy to process, and safe for health. Covering a garage space with clapboard will pay off if the wood has undergone preliminary protective treatment with an antiseptic and fire retardant. The positive qualities of wooden lining include the following properties:

• Environmentally friendly and durable.
• Availability for a wide range of consumers.
• Simple and reliable installation . The lining is laid on a wooden sheathing or on a plastered wall. The parts have a notch-ridge connection system, due to which they fit tightly to each other.
• Strength and frost resistance.
• Resistance to mechanical stress.
• Natural texture and a large selection of natural shades.

Cladding with clapboard Source corrosion.ru.net
The disadvantages of wooden clapboard include the following features:

• High hygroscopicity.
• Exposure to bio-threat . In a room with high humidity, there is a high likelihood of mold and pests.
• Flammability . It decreases somewhat after using a fire retardant.
• Difficult care . It can be difficult to clean the wall from oil stains, so it is recommended to cover the wooden paneling with a layer of varnish that protects the wood from absorption.

No. 5. Wooden lining

If the garage serves not only as a place to park your car and repair it, but also as a place for privacy and meeting with friends, you can choose an aesthetically pleasing finish made of wooden lining.

Advantages:

Disadvantages expected for wood flooring:

If you use a number of protective agents, then some qualities of wood can be significantly improved. Fire retardants will increase fire resistance, antiseptics will protect against mold, and varnishing will simplify routine cleaning procedures, since oil and other liquids will not be absorbed into the porous, hygroscopic surface of the wood.

Video description

About finishing walls with wooden lining in the following video:

• Simple installation with a minimum of construction waste (compared to classic plaster).
• Use as a base . Ceramic tiles can be fixed to the material (if it was used to level the walls) or relief plaster can be applied.
• Use as a partition . Drywall attached to a frame is suitable if you want to allocate space in the garage for a mini-warehouse or locker room.
• Changing shape . Drywall is suitable for forming not only flat, but also arched structures (after preliminary preparation).

Cladding garage walls and ceilings with plasterboard installed on a frame has its disadvantages:

• Unprofitable for a small room. The frame reduces the already small free space.
• Low impact resistance of walls. If it is planned to cover the plasterboard with a durable material (for example, ceramic tiles), the disadvantage disappears.

Sheathing with moisture-resistant plasterboard Source koon.ru

Sheathing with OSB sheets

As an option for finishing garage walls, you can find plywood and other wood-based materials. OSB (oriented strand board) sheets, which are made from a mixture of crushed wood and various binding additives, are well suited for constructing insulated walls. For covering garage walls (and ceilings), the best option is sheets marked OSB-3 or OSB-4. OSB-3 material is the most common choice for finishing a garage. It is characterized by good strength and average moisture resistance, therefore it requires additional moisture-proof treatment. OSB-4 is a more durable option with the following advantages:

• Long service life.
• Durability and resistance to temperature changes.
• Good moisture protection . The material does not deform in conditions of high humidity.
• Resistant to mold (contains antiseptic additives).

No. 2. Ceramic tile

Ceramic tiles are another material that almost completely meets all the requirements put forward, which is why this type of cladding is often found in garages. Its main advantages include:

There were some downsides :

Since the main deterrent to the widespread use of tiles in garages is their price, you can use a trick by combining materials . The lower part of the walls is the most vulnerable, so clinker can be used here, and the rest can be made from cheaper tiles. You can make the bottom of tiles and finish the top with plaster. In this case, we get all the benefits inherent in tiled flooring, but we can save a lot.

Video description

About the types of garage floor coverings in the following video:
Interior decoration of a garage with OSB panels also has disadvantages:

• The material belongs to the highest flammability category (G4).
• Evaporation of harmful substances . The sheets contain formaldehyde resins, the evaporation of which is harmful to health, but, with ventilation, can have an acceptable level.

Corrugated sheet

One of the options for practical and cheap cladding is corrugated sheeting - a profiled steel sheet protected by a polymer or paint coating. Like the lining, it is convenient to attach it to a wooden sheathing. The corrugated sheet has the following features:

• Durability and non-flammability.
• Resistant to temperature changes and aggressive environments.
• Quick installation , ensured by large material sizes.
• The main disadvantage of corrugated sheets is susceptibility to corrosion .
• Replacing a bent corrugated sheet will cost more than repairing vinyl siding (PVC panels).

Sheathing with corrugated sheets Source buildingwork.net

No. 3. Drywall

Drywall has conquered not only residential premises, but also technical ones. So sheets of plasterboard are now often used to decorate garage walls. Naturally, only those that have additional protection from moisture and fire . You can recognize this material by its gray-green color, red markings and the name GKLVO.

Advantages:

Flaws:

Drywall in a garage can be used not only for finishing walls, but also for constructing partitions, as in apartments. If you need to allocate, for example, an area for a storage room or workshop, then you will only need to build a frame and cover it with sheets.

Floor and ceiling finishing

The roof for garages is usually made flat. This saves money and effort, but at the same time increases the likelihood of leakage when water after rain lingers on a horizontal surface. Therefore, the decorative covering of the ceiling in the garage begins after waterproofing it. One of the most common methods is plastering the ceiling and then painting it. Since the ceiling is not damaged, the choice is often made in favor of MDF or PVC panels. This is a popular and practical option that allows (when using a frame) insulation and hiding communication systems.

Design Guidelines

The floor covering should be convenient for frequent cleaning.
The room should have a business-like appearance, while having a laconic interior of a certain style. Choose non-staining and practical colors, shades of medium intensity. Upon entry, the impression of solidity and thriftiness should be created. Repairs to walls or floors are carried out in a timely manner so that there is no feeling of neglect and negligence.

As an addition, there are well-designed shelves; all the necessary tools should be at hand. Lighting is done organically so that there are no dark corners. A workplace with a workbench is decorated to match the tone of the entire room or is distinguished by its own style, for example, wooden panels or a different paint color.

Wood is combined with brick, painted plaster, cardboard, and tiles go well with concrete and plastic. PVC panels are used to cover the top of the walls, where there are no shock loads, and the bottom panels are made of ceramics and decorative plaster.

A place is allocated for waste disposal and decorated in the style of the main decoration so that it is not conspicuous.

Video description

About the intricacies of self-leveling flooring in the following video:
Special requirements are imposed on the flooring in the garage; it must withstand significant and regular weight loads from the car. The preferred flooring options are:

• Painted concrete floor . A popular option that can easily support the weight of a car. A concrete floor coated with a primer weakly absorbs spilled auto chemicals, does not collect dust and is resistant to abrasion. Although the process of installing a concrete floor cannot be called quick, many car enthusiasts opt for it due to the low costs and simplicity of the technology.
• Tile . A garage floor made of ceramic tiles (or ceramic tiles) looks neat and often original. The coating is advantageous due to its durability, easy maintenance and resistance to fuels and lubricants. The limiter to the use of tiles is their high cost and the rather labor-intensive process of creating a tile covering (including mandatory waterproofing).

Ceramic tile flooring Source koon.ru

• Poured concrete . Impact-resistant coating with a perfectly flat surface, not inferior in strength to a classic concrete floor. One of the most successful coatings for a garage, as it is frost-resistant and has increased resistance to chemical environments. The disadvantage of this method is the high price of the composition, which is why self-leveling flooring cannot be called an economical option. Another subtlety is that the base for pouring must be perfectly flat, which is not always achievable.
• Wooden floor . The choice in favor of a wooden floor covering (from floorboards) is not often made, although the base for such a floor does not need to be leveled. Many believe that this type of floor has more disadvantages than advantages - flammability, high degree of absorption and low strength. Proponents claim that wood flooring is much more pleasant and healthier to work on; In addition, wood (unlike concrete) does not generate dust.

Self-leveling polymer floor Source ko.decorexpro.com

Cleansing rituals: how to cleanse yourself, your home and magical objects from foreign energy

Home cleansing rituals that destroy “energy spam” In our lives, it is not always possible to surround ourselves with only new things. The lion's share of our household items (including clothes, dishes, jewelry) may previously belong to another owner, and there is nothing strange about this. The desire to save money, gifts, presents, inheritance - this is not a complete list of reasons due to which we become owners of “used” things. However, unfortunately, they often do not influence the life of the new owner in the best way. Is it possible to cleanse these objects and yourself from other people’s energy? How to do this without compromising your own well-being?

Why is it so important to cleanse someone else’s energy? The power of negative energy inherent in an object does not appear immediately. Perhaps you will be the object of her target, or maybe your children and even grandchildren! For example, a mother gives her daughter a beautiful fashionable sweater for her 16th birthday, which she knitted with love at night.

At the same time, my mother kept saying: “It would be nice if my daughter was modest and homely, at least nothing happened to her, why discos, walks, dates?” The daughter is happy with the gift, wears it all the time, and cannot understand why she doesn’t get along with young people? All her friends have already gotten married, but she modestly sits at home alone, because she’s not up to dancing, it’s all the Internet, the Internet... She meets a guy on a virtual network, they get married, but again everything goes wrong. She gets pregnant and the couple divorces. And again the girl is at home, with her mother, modest, quiet, because she has nowhere to go... Now her mother scolds her for her unlucky life. And who is to blame? Even a new thing, especially metals and precious stones, which deeply “absorb” feelings and emotions, should be subjected to purification rituals. For example, after guests you should clean your home to remove unnecessary energy debris.

1. Plant trees under your windows: cherries, apples, apricots can survive even on the most polluted street, and their energy can clean even high-rise buildings.2. Place living plants around your apartment/house. As you know, they absorb negative energy. Monitor their condition carefully! Dried branches and leaves can signal that quite strong energy has settled in your home, which needs to be eliminated with more powerful forces.3. Get rid of unnecessary items. We like to create so-called landfills on our balconies from old things that we hate to throw away. Beware! They can be sources of “bad energy.”4. After guests have left, wash the dishes and tidy the room and kitchen to eliminate any negative information left behind.5. Every item that you bought, even in the most fashionable boutique, should be “smoked” with incense or washed and rinsed in running water.6. Get a cat in your house that will drive out negativity from all corners.

Preparatory work

First of all, you need to make a sheathing frame. Almost all types of finishing panels are mounted on it using a single simple technology. It is made from wooden beams or metal profiles. The easiest way to install an aluminum profile. To avoid rotting or other damage, the wood is treated with an antiseptic. Next, insulation is laid into the cavity of the frame - better tile than roll. It is usually attached to an adhesive base or with self-tapping screws with a wide head.

The distance between the sheathing beams is made slightly smaller than the width of the insulation, which is laid under the frame.

You cannot use polystyrene foam for insulation (due to flammability); mineral wool and expanded polystyrene are better suited.

Foil or polyethylene is glued to the insulation to prevent moisture from collecting. Now you can veneer.

It is easy to install not only insulation under the sheathing, but also to place cables, pipes, and ventilation.

All finishing materials, except metal, are attached to the sheathing not rigidly, but with a small gap. Then the cladding will not suffer from temperature fluctuations.

As a base, concrete is considered the best: cheap, durable, safe. However, it absorbs everything and generates a lot of dust. Therefore, it needs to be refined with something on top. The simplest option is paint or impregnation, but they do not last long. It is more reliable to pour polymer floors: they are suitable in all respects and if you follow the technology when pouring, they will last for decades. It is easy to lay tiles on concrete, but before finishing the inside of the garage in this way, you should first treat it with a primer so that the glue does not absorb. The best are clinker tiles (expensive) or porcelain tiles (equally durable, but much cheaper).

A functional and safe coating is provided by rubber, rolled or in the form of tiles.

Expert commentary

The most common finishing option is lining, plastic or wood. The appearance of the material is the most aesthetic. Wood is easy to work with: nails are easily driven into it and do not deform the surface, which is important for a garage. You still need to try to install something on plastic. But it does not support combustion.

The cheapest finishing option is plaster. But such a process requires at least some skills and takes a long time to install. Although it is convenient to practice in the garage before future renovations in the apartment. Ceramic tiles are the most convenient maintenance option. Removing dirt from it is easy and simple, but, unfortunately, it is afraid of impacts. If you accidentally hit a surface with a tool, a chip may form.

Another selection criterion is fastening. If you attach the material directly to the wall, then you will not be able to insulate the garage. But when installing the frame, you can lay thermal insulation with any convenient material. But do not forget that the garage must have a ventilation system. Closing the vents completely can be life-threatening due to carbon monoxide from the machine.

Source