2021 ᐈ

What is glass wallpaper?

Fiberglass wallpaper is a finishing material for walls consisting of impregnated fiberglass. The surface has a relief pattern. Fiberglass wallpaper is made from glass blanks that melt under high temperature and the fibers stretch.

These are subsequently used to create threads, and then fabric or fiberglass using the weaving method. Later, the surface is coated with impregnation to ensure the stability of the material.

How to glue glass wallpaper?

Gluing fiberglass wallpaper yourself is not difficult, but you should prepare and take into account several nuances.

Set the room temperature to 18-25 degrees , observe the regime during the entire pasting process.
Choose special glue . Often, companies that produce fiberglass wallpaper also sell an adhesive with a suitable composition. The usual one will not work in this case; high-quality gluing will not work.
Before you start, determine where the front side is and where the back side is. Usually the wallpaper is folded inside the front.
Prepare gloves and long sleeves, cut wallpaper . This is necessary so that when cutting the canvas crumbles a little, and untreated material can cause skin irritation.
The glue is applied to the wall, not to the canvas. Be sure to read the instructions on the package . Different adhesives may have different times for which they should be left in place before gluing begins.
Glass wallpaper is glued joint to joint , without gaps or overlaps.
You can level the canvas using a rag or roller .
After drying, paint with special paint , preferably using a fur roller. Foam rubber does not apply paint as smoothly.

In general, it is very similar to the usual gluing process we are used to. The main thing is not to forget about the characteristics of the materials; they must be specialized for fiberglass canvases.

A few more photos:

Compound

Fiberglass wallpaper consists of natural materials: soda, clay, limestone, quartz sand. To transform from blanks into fiberglass, only high temperatures are required, reaching 1200 degrees.

The basis of the impregnation, which is applied upon completion of the work to ensure the durability of the material, is modified starch.

Specifications

Service life more than 30 years
Possibility of coloring Coloring up to 20 times
Standard size, (m.) 1x25; 1x50
Static electricity does not accumulate
Vapor permeability level High
Fire properties Yes
The minimum density of wallpaper for wall decoration is 100 g/m2. m.

Types of cullet

Wallpaper based on fiberglass is divided into two main groups according to the production method: woven and pressed. Wallpaper obtained by weaving is a ready-made finishing material. They have a relief structure and a certain ornament, from simple geometric to complex patterns and inscriptions. Fiberglass wallpaper is denser and more durable, painted in different colors.

Another name for pressed glass wallpaper is “spider web” or painting fiberglass. They are looser in appearance and are used for leveling and reinforcing surfaces with subsequent finishing. They are light and smooth, so they are more often used on ceilings than on walls.

Advantages and disadvantages

The advantages of this finishing coating include:

Strength. Fiberglass wallpaper is distinguished by its high strength from other finishing coatings. They do not tear, do not scratch or become deformed. It is worth noting that the material tolerates the effects of all chemicals during wet cleaning.

Favorable microclimate. The structure of the wallpaper consists of small loops that help water vapor move between them with ease. This “knitted product” does not attract dust and prevents the accumulation of static electricity.
Environmentally friendly. This finishing coating consists of a special type of glass that is safe for others, and it also does not allow harmful microorganisms to multiply.
Sustainability. The coating is not prone to mechanical damage. It does not deform when in contact with hands or in contact with furniture. If necessary, you can replace the damaged fragment using horizontal gluing.
Easy to paste. In order to cover walls with fiberglass wallpaper, you do not need to have special skills.
Fire safety. Resistant to high temperatures.

Disadvantages:

Price. Depending on the image and texture, the cost of such a canvas may be inflated.
Specialist. cloth. To carry out repair work, you will need to purchase special protective clothing. This is necessary so that when pasting the walls, microparticles of glass fiber wallpaper do not get on you, which can lead to irritation or allergies.

Paint costs. Fiberglass wallpaper is highly absorbent, so to paint a wall you will need a large amount of paint.

How to choose glass wallpaper for a room and premises

It is recommended to use glass wallpaper with a high density

Before you decide which wallpaper to choose, we recommend reading some useful tips.

The main indicator of the quality of glass wallpaper is its density. When choosing this finishing material, you must be extremely careful, as it happens that unscrupulous manufacturers add a special starch impregnation to the composition of the canvases in order to increase this indicator. It is impossible to determine this at first glance, since wallpaper is packaged in rolls at production. The opportunity to see the defect appears during the process of gluing wallpaper to the wall, since the glue applied to it will cause the starch to simply dissolve. In this regard, when choosing fiberglass wallpaper, it is recommended to give preference to well-known and trusted brands.

white glass wallpaper with a relief stripe

Selection based on texture

Texture. This indicator can be artificially changed. There are manufacturers who, during the production of wallpaper, fluff the threads, which is why the texture becomes more voluminous. This becomes noticeable when gluing fiberglass sheets to the surface, when excess air is removed.

It is necessary to find out in advance whether the materials provided correspond to the characteristics indicated on the packaging. To do this, you need to take a piece of wallpaper as a sample and stick it on the wall. Then you need to cover the wallpaper with paint and see if there is a change in the properties of this wallpaper sample.

white glass wallpaper

In the process of choosing paint, you need to consider it through the prism of how regularly the surface will be under mechanical influence and how often cleaning is planned. Experts recommend choosing latex and glossy paints. For those rooms where there is a lot of foot traffic, you should choose paint that has a water-resistant effect - then it will not wear off during use. In the photo for the article you can see the glass wallpaper in the hallway - a very visited place in the apartment - after quite a long time of use.

Siekloo wallpaper “cobweb”

When choosing wallpaper for the ceiling, experts advise buyers to choose “cobweb”. There is no relief or texture on it, and therefore there will be no need to adjust the pattern. Fiberglass also has reinforcing properties, which allows you to obtain a surface that is resistant to mechanical stress.

glass wallpaper with diamond-shaped texture

To cover the ceiling, it is allowed to use materials with poor resistance to mechanical damage. Such glass wallpapers have less weight, so they are easier to glue to the surface. The fact is that the ceiling is not subjected to various types of mechanical stress and does not often become dirty, so you can save a little on the material.

For wall coverings, it is best to choose first grade wallpaper, as they have good performance characteristics. In order not to make a mistake when choosing the type of such finishing material, you should look at the number of meters in the roll. If there are up to 15 meters in a roll, then it is second-class wallpaper; if it is 25 or more meters, then the wallpaper, accordingly, belongs to the first-class coating.

glass wallpaper is suitable for rooms with high traffic volumes

Some tips

Fiberglass wallpaper can be used in any room, as they are strong, durable and resistant to various types of influences. They are well suited for rooms with high traffic volumes. This is a living room, a children's room, an entrance hall. It is also necessary to take into account how often wet cleaning can be done using chemicals. Also, such wallpaper is simply an excellent covering for walls in the kitchen and bathroom. Fiberglass wallpaper is non-flammable and non-toxic, so it can also be used as a decorative covering for stoves.

To determine the amount of material consumed, it is necessary to calculate the area of the future surface to be pasted in length and width. You should also remember that you will need about 10 cm to adjust the pattern with an allowance for each piece that is cut.

Qualities and advantages

The technical features of the product and its advantages were determined by professionals and ordinary buyers.

Environmental friendliness

When it comes to high-quality wallpaper, manufacturers use exclusively safe and natural raw materials. Due to this characteristic, the finish can be used to decorate children's rooms, as well as in houses where allergy sufferers live.

This is a significant advantage compared to products made from artificial substitutes and chemical components.

Special texture

Fiberglass wallpaper is a breathable material. Due to the air permeability, comfortable conditions are created in the room. Excess moisture, which causes the formation of fungus and bacteria, does not accumulate under and on the finish.

Antistatic

Due to its special composition, wallpaper does not accumulate an electrical charge, since glass does not conduct electricity. Thanks to the special effect, the cleaning process is much easier, because dust practically does not accumulate on the surface. This is also a plus from an aesthetic point of view.

Reliability and durability

The glass fiber material boasts its durability. The service life of the canvas is many times greater than that of wallpaper made from other materials, such as paper or fabric. On average it lasts about 30 years.

Wallpaper is also practical and wear-resistant, does not require special care, and is not susceptible to damage from the paws of pets or a bicycle.

Fire resistance

Fire safety is very important regardless of the significance of the facility. The melting point of glass is 1300 degrees Celsius. Considering this fact, wallpaper made from the above material cannot cause a fire.

When exposed to open fire and high temperatures, the material does not emit harmful substances that are dangerous to others.

Possibility of painting

Canvases can be painted many times without destroying their texture and density. Most manufacturers guarantee 20 paint jobs. Due to the treatment with enamel, the canvas acquires the required shade. This is an important factor in the interior design of houses and public institutions.

Removal

Removing the remnants of the old coating from the walls is very problematic. For complete removal you will need many tools and a lot of time. This significantly prolongs the renovation, especially when it comes to the design of large premises.

Slicing

If you have to cut the wallpaper, you will notice that the glass fibers will begin to crumble. To avoid damaging your skin during work, use a special mask and glasses.

Paint consumption

To decorate walls with such wallpaper, you will have to spend more paint than when working with paper and other wallpapers widely known on the market. The reason for the increased consumption is the high relief and texture.

Defects

The texture of the canvas can be changed after the first painting. However, this disadvantage only exists with low-quality finishes.

Expenses

If you decide to carry out finishing work with the help of qualified craftsmen, this will be an additional cost. The whole process is divided into 2 stages: wallpapering; painting.

Types of fiberglass wallpaper

By invoice

Fiberglass wallpaper has two main types of texture, smooth and embossed. Different types of wallpaper can serve different functions.

Smooth

Smooth fiberglass wallpaper is also called gossamer or fiberglass wallpaper. This is due to visual similarity. In addition to the aesthetic function, smooth glass wallpaper also performs a practical one, namely, it is used to strengthen and level walls or ceilings. Smooth glass wallpaper will be a good option for finishing the ceiling; the surface is smooth and even.

Embossed

Another name is traditional glass wallpaper. A material with greater density compared to smooth wallpaper. The surface has a clearly defined relief, forming some kind of ornament or design. This type of fiberglass wallpaper is suitable for final wall decoration.

Gozhka

The type of texture has the name of the fabric, which is distinguished by a unique and recognizable way of weaving threads; visually the surface of the glass wallpaper looks like a sheet of fabric. Weaving can be small, medium and large.

Rhombus

The weaving of the fiberglass fabric forms a diamond-shaped pattern along the entire length of the fabric. The drawing can be with figures of equal or different sizes. Diamonds are also distinguished between large, medium and small. Visually, the wall covering looks like jacquard.

Herringbone

The fiberglass fabric has a zigzag pattern along its entire length. Like other types, the drawing can have different sizes. Small ornaments are suitable for decorating small rooms, such as a corridor.

To order

Today, in addition to the usual patterns, glass wallpapers are also made with other patterns; in production, you can also make an individual order for a unique weaving according to an individual sketch.

By quality

The quality of glass wallpaper depends on its density; the higher it is, the stronger the material and the longer its service life.

1 class	The most durable coating of this type of wallpaper. Service life on average 30 years. The density of glass wallpaper is more than 100 grams per sq.m. The canvas is ready for repeated repainting, without loss of external qualities.
2nd grade	The density of fiberglass fabric is less than 100 grams per sq.m. Fiberglass wallpaper has a shorter service life. A good option for budget renovation. When re-dyed, the pattern becomes clogged and the texture becomes less noticeable.
Economy	Manufacturing defects are common. Material with low density and, accordingly, quality.

By color

For painting

Paintable fiberglass wallpaper is made in a neutral color, most often white or beige. This background allows you to apply any shade to the surface without distorting it.

Colored

Colored fiberglass wallpaper is not intended for painting; paint is added during production. This type of finishing is suitable for a room that does not require regular updating.

The photo shows a dining room in a classic style. The finishing is made with glass wallpaper in orange tones.

By water resistance

During production, the degree of water resistance of fiberglass wallpaper is indicated on rolls or packaging. The designation is in the form of waves. The more waves, the higher the water resistance of the material.

1 wave

Fiberglass wallpaper does not have good contact with water. The surface can be washed with a slightly damp soft cloth or suede.

2 waves

They indicate the average degree of moisture resistance of fiberglass fabric; the material tolerates contact with water better. The surface can be washed with a cloth or soft sponge and water or soap solution.

3 waves

The three-wave icon means a high degree of moisture resistance of the glass wallpaper. When cleaning, non-abrasive detergents can be used.

Features of glass wallpaper

Even the best glass wallpaper has its own characteristics, which are best known before purchasing. First of all, you need to purchase special glue for the job. In addition, it is better to choose the paint in advance, because... Not all paints are suitable for this coating.

In addition, in rare cases, it may be difficult to dismantle the coating; it depends on the wall.

Fiberglass wallpaper is a solution that allows you to take a new look at wall decoration. Now that all the advantages and features of this material are known, all that remains is to visit the supermarket and make your most cherished dreams come true, and the photos of glass wallpaper in the interior from this article will be an excellent help in realizing your ideas.

Feel free to color your life with this amazing material.

What to look for when choosing

If we have already examined the main features and classifications of glass wallpaper, there is also a voluminous list of nuances that must be relied on when choosing a quality material. First of all, you should pay attention to the following factors:

Density of the material. It is a key indicator of product quality. As mentioned earlier, natural starch can be added to the filler composition, which will help increase this value and will appear only at the gluing stage. As a result of contact with the adhesive, the starch particles will simply dissolve, which will lead to a “weak” porous structure. Unfortunately, it is impossible to identify such deception on your own, so we recommend using only trusted sellers and manufacturers, which we will talk about below.
Relief pattern. The texture indicator can also be deliberately overestimated. The deception will only appear at the gluing stage, as a result of prolonged ironing with a roller and forcing out air bubbles. The way to avoid running into such glass wallpaper is similar to that described above: contact only suppliers with a good reputation.

Texture of embossed glass wallpaper for subsequent painting Source krasnodar.oteks-ug.ru

Harmonious paint for glass wallpaper in the living room Source www.stroykit.ru
The best glass wallpaper for the ceiling is the “cobweb” type. After painting, it forms a completely flat plane without relief patterns. In addition, it is glued without adjusting the pattern and has high reinforcing qualities.

Healthy! If it is not possible to find reviews about a specific seller of glass wallpaper, you can purchase 1 roll and verify its quality characteristics by gluing a small area yourself. Possible frauds that were listed earlier will appear at the first stage.

Fiberglass wallpaper for painting in the interior Source mag.oir.kg

Fiberglass wallpaper that imitates decorative plaster Source pic0.oboi-store.ru
The selection of paint must be carried out taking into account the conditions and operating characteristics of the treated surface. Gloss or semi-gloss paint is preferred. In hallways and kitchens, it is recommended to use moisture-resistant compounds that are not prone to abrasion and destruction under the influence of aggressive detergents.

Criteria for choosing glass wallpaper for painting

The peculiarities of glass wallpaper production sometimes make it difficult to choose. It may be impossible to visually distinguish high-quality products from defective ones. Knowledge of selection methods does not help either. For example, the density and thickness of the material can be increased by impregnation.

But this will definitely have an effect during the pasting process - the canvas tears, deforms, loses elasticity, and sometimes decreases in size. As a result, the clarity of the drawing is disrupted.

The ideal solution to the problem is to cut a piece from the roll, stick it on a solid base (not advisable on the wall, because if the quality is good, it will take a long time to peel it off), let it dry, and paint it. The test is completed by pressing the spatula onto the trellises. If they are not deformed or change their appearance, the quality is high.

If this is not possible, the choice should be made according to the following parameters:

density;
composition;
class;
pattern.

Density.

The density criterion determines the durability of the trellis. There is a direct relationship here: the denser, the longer the service life.

Wallpaper with a density of over 100 g/cm2 is considered high quality. But this is the lower limit of the indicator. You need to focus on the figure of 150 g/m2 (European manufacturers have a standard value of 145 g/m2). Deeply patterned fiberglass fabric (jacquard) can be even heavier, up to 220 g/m2.

But here, as with any rule, there are exceptions. For the ceiling, 25 g/m2 is enough - that’s how much smooth cobwebs weigh. But for walls, the web canvas should have an indicator of 45-50 g/m2.

Compound.

Many buyers underestimate such a selection criterion as composition. But in vain. The strength and durability of the finish depend on the indicator. At the same time, deviation of the ratio of 70% fiberglass to 30% impregnation in any direction worsens the consumer characteristics of the finishing material.

Information about the composition should be on the insert. Its absence should alert the buyer.

Class.

On the insert you can also find the class of wallpaper (Russian manufacturers indicate the grade, which is the same thing). You need to buy first class fiberglass trellises. When purchasing second-rate decor, the density must be at least 100 g/m2.

Pattern.

For the ceiling you need smooth wallpaper - cobweb. For the walls, the pattern is chosen depending on the taste of the owners (“matting”, “herringbone”, “drops”). At the same time, a pattern with greater depth can be repainted more times - the pattern will be preserved.

Preparing for wallpapering

Before gluing glass wallpaper, you need to prepare all the necessary materials and tools, as well as carefully treat the walls.

To work with glass wallpaper you will need:

Special glue for glass wallpaper;
Primer and putty;
Acrylic or latex paints;
Containers for liquid formulations;
Industrial mixer for glue or primer;
Wide brushes for applying compositions to walls;
Spatulas;
Protective glasses;
Paint rollers with long handles;
Sandpaper;
Rags;
Sponge;
Pencil, scissors, level.

Advice. Stores sell ready-made, liquid primer solutions that do not require dilution.

Fiberglass wallpaper can only be glued to well-prepared, even walls. Otherwise, they will lag behind in a few months and the work will have to be completely redone.

Before wallpapering, the walls must be cleaned of old finishes, washed and primed thoroughly. At the same time, all cracks and irregularities are covered. It is also advisable to check the evenness of the walls using a level or plumb line.
The primer is applied with one spatula to another, and then it is spread over the wall. After this, this surface is also leveled with a spatula.
After applying all the primer, you need to give it time to dry. It is better to leave it for one day. For greater leveling on the walls, you need to go through sandpaper with a spatula.

After this, the final putty is applied, which will ensure good adhesion of the glue and paint to the wall. The putty should also be left to dry for a day and then leveled to perfect condition with a spatula and sandpaper.

Popular manufacturers and prices

A well-known brand can guarantee quality. Among them are many world-famous companies producing fiberglass wallpaper:

"Vitrulan";
"Tassoglas";
"Nortex";
"Welton"
"Oscar"
"Bau Master";
"X - Glass";
"Saint-Gobain Novelio";
"Waltex"
"Veterman"
"Mermet" etc.

"Vitrulan".

Fiberglass wallpaper under the Vitrulan trademark is produced by the German concern Vitrulan Textile GMbH, the largest manufacturer in Europe. The company's technologists are constantly working to create a variety of lines of trellises, as a result of which they are distinguished by their smoothness, types of patterns, softness and color. And all this with quality that is commonly called German. The base price per 1 m2 ranges from 170-468 rubles.

"Tassoglas".

The product of an American company with its factories in the USA, Europe and China. It achieved fame thanks to the widest range of surface textures among similar productions. Practical and high-quality fiberglass is used not only for finishing offices and organizations, but also for covering walls and ceilings in living rooms.

Rarely found on sale. Costs from 82 to 450 rubles/m2, depending on density.

"Nortex".

"Nortex" is a trademark of a Russian company. Production is located in China. Takes into account the requests of all buyer groups. Therefore, on the market you can find both premium-class wallpaper with a high density of 200 g/m2, and economy-class wallpaper with a density of up to 100 g/m2. They are distinguished by durability, a guarantee of over 30 years and a variety of patterns.

The price range is significant. You can buy it for 66 rubles/m2 (“Medium matting”), and for 168 rubles/m2 (“Rain”).

Welton.

A Swedish brand with established production in many countries of the world: Germany, Russia, Czech Republic, Finland and China. All production facilities produce high quality products with stylish design. The cost of 1 m2 is about 208 rubles.

"Oscar".

Subsidiary, but with more affordable prices and good quality - 69-107 rubles/m2.

"Bau Master"

China. They are distinguished by affordable prices and good quality. The cheapest wallpaper can be bought for around 33 rubles/m2, the most expensive - 130 rubles/m2.

"X - Glass."

Russian manufacturer with a wide range of glass fiber and canvas in the middle price range. For example, fiberglass fabric can be found on sale for 47-80 rubles/m2.

If we consider specific wallpaper models, their rating for mid-2022 is as follows:

1. "Vitrulan Acoustic 904 Labyrinth". The wallpaper is unique in that a layer of heat and sound insulation is applied to the reverse side (reduces noise by about 2 times).

Their density is 610 g/cm2, dimensions are 10.4 x 0.96 m, price is 20,866 rubles. per roll.

2. "Vitrulan Aqua Plus 604 phantasy microcrepe." The highlight is that there is no need to select a design or buy glue - it is already applied to the back side.

Density - 200 g/m2, dimensions - 1 x 25 m, price - 9400 rubles. per roll.

3. "Brattendorf B021 Rain." German quality products costing about 9,360 rubles.

4. "Novelio Checkers 1023". Czech glass wallpaper 25 m long, density 195 g/m2, priced at 4,078 rubles per roll.

5. "X - Glass Gold." Finishing finishing material with a price of 3200 rubles. per roll.

Glass wallpaper in the kitchen: pros and cons

We discussed the main advantages of wallpaper above. And all good qualities are undoubtedly important for all rooms in the house, including the kitchen.

Additionally, there are benefits for the kitchen :

practicality - glass wallpaper easily tolerates detergents (we have never seen a kitchen without an oil stain) and water;
safety - wallpaper is hypoallergenic and maintains a favorable microclimate;
resistance to temperature changes, which due to cooking can rise and fall several times during the day;
environmental friendliness - the room where we cook and dine should be protected no worse than the bedroom;
good compatibility with other materials; for example, with tiles, which are often used to decorate the kitchen backsplash.

The disadvantages include the peculiarities of care. When you're in a hurry to wash a stain after cooking, you might mess something up. It is important to remember that all detergents must be non-abrasive.

How to properly paste glass wallpaper for painting

Glass wallpaper in the interior can look different, it depends on the chosen color, pattern, texture, etc. In many ways, the appearance of your room depends on how they are glued. In order for this process to take a little of your time, and to avoid any problems with gluing them, you need to know some features:

when you start gluing the coating in question, you must remember that the glue is applied directly to the surface of the walls and ceiling, the wallpaper does not need to be coated with an adhesive;
For such purposes, you need to purchase special glue; regular glue will not work, because this type of wallpaper is much heavier than similar wallpaper. You can buy it ready-made or in powder form;
before gluing glass wallpaper, you need to find out where the front side is on them; in appearance, the sides are very similar;
This coating dries in about a day, so during the drying time of the wallpaper it is necessary that there are no drafts in the room;
after complete drying, you can start painting them;
Wallpaper must be glued end-to-end, starting from the corner.

Glass wallpaper in the bathroom

glass wallpaper with relief patterns

When arranging a bathroom, glass wallpaper is an excellent alternative to tiles. This type of coating is positioned by manufacturers as an environmentally friendly material that has a good texture. This coating also helps create various visual effects.

Features of choice

“Reviews describe gray glass wallpaper in the bathroom not in the best way, since such a bathroom will evoke coldness”

According to designers, for small bathrooms it is better to choose a modest texture. If the bathroom is large, then you can choose wallpaper with a wide pattern. You can also consider the option of combining canvases with or without different bas-reliefs. In any case, such an unusual approach to decorating the interior of a room will have a positive effect on the result. There will be no problems when choosing a color scheme for the bathroom, since modern paint can be easily colored in a store that has a special machine installed. It must be remembered that the paint that is applied to the wall, after drying, will have a color that is a shade lighter than what is indicated on the can.

glass wallpaper is easy to care for

Reviews from people recommend choosing glass wallpaper in the bathroom, taking into account, first of all, its moisture-resistant characteristics. An important property that such wallpaper should have is vapor permeability, which allows air to circulate freely in the room.

What to pay attention to

Materials intended for painting can be glued in places where there is constant direct contact with water, but this cannot be done with other types of glass wallpaper. Paintable fiberglass, which is produced for gluing walls and ceilings in the bathroom, is designed in the same style. The fact is that the universal canvas will be painted in any case, the design will be painted over and will not require special modification.

glass wallpaper is resistant to mechanical stress

Due to the fact that artificial lighting is almost always present in the bathroom, experts recommend opting for light paint with a thermal color scheme. But, if the buyer wants to purchase paint in more saturated and deeper tones, then it is better to use shades of blue, blue and green. Reviews describe gray glass wallpaper in the bathroom not in the best way, since such a bathroom will evoke coldness.

For the bathroom you should select moisture-resistant glass wallpaper

When using glass wallpaper, the owner of the bathroom will receive a wonderful interior, which he can change at any time if he wishes. He also won’t have to worry that the coating will lose its performance and its service life will decrease.

Advantages of glass wallpaper in the bathroom

glass wallpaper perfectly masks uneven walls

Such wallpapers are highly durable, making them difficult to damage. They do not stretch and are resistant to mechanical damage.
They can help disguise unevenness on the walls in the bathroom.
The wallpaper is based on fiberglass, which breathes and allows air to circulate freely. As a result, during operation, mold and mildew do not form, and various bacteria do not multiply.
Fiberglass wallpaper has a long service life. The useful life reaches more than 30 years. The material can be dyed more than 30 times.
Finishing materials have quality certificates. Certified products can be identified by their packaging - the letter A will be indicated on it.
Glass wallpaper is easy to care for. They can be washed using water and various chemicals.

Disadvantages of glass wallpaper in the bathroom

glass wallpaper is best suited for bathrooms and hallways

Some types of glass wallpaper have a texture whose relief is weakly expressed. If paint is applied to such a surface too often, then after a small number of stains the pattern and existing relief will become invisible.

Some people believe that glass wallpaper is too simple and laconic, and it gives off a cold vibe. They are partly right.

glass wallpaper in the bathroom

If the surface of the wallpaper is painted too often or low-quality material is used during the gluing process, then over time this coating may crack and lose its aesthetic appearance.

The main disadvantage is the high cost. It is worth understanding that glue for such wallpaper is also expensive.

What and how to paint then

Dried wallpaper undergoes a finishing operation - painting. For this, water-based or water-dispersion acrylic paint is best suited.

You need to paint after the wallpaper is completely dry (the time is indicated on the glue packaging). But before this, it is necessary to prepare the room so that splashes of paint do not get on the floor and furniture, apply a primer to the fiberglass - this will reduce paint consumption and improve its adhesion to the trellises.

You can prime with a special primer or heavily diluted wallpaper glue.

Painting is carried out with a small paint brush, initially in hard-to-reach places, such as corners and joints of the wall with the floor and ceiling, and only then with a roller over the entire canvas. Drips are removed with a used roller.

When passing the joints of the sheets, be sure to grab the next sheet to avoid visible seams. After the first layer has dried, the second is applied.

In conclusion, the use of fiberglass wallpaper for decorating an apartment or house allows you to create a durable finish with the possibility of regular renovation of the interior (if all operations are performed correctly, glass wallpaper will last more than 30 years).

The gluing and painting technology does not contain anything complicated - the work can be done on your own.

Advantages of glass wallpaper

light glass wallpaper in the hallway design

Resistance to harmful influences. The fiberglass fabric used to make wallpaper is highly durable. This coating resists various types of mechanical damage well.
Durability. Fiberglass wallpaper can last more than 30 years. At the same time, they do not lose their attractive appearance and maintain their performance characteristics. In particular, glass wallpaper for the bathroom is overwhelmingly recommended by reviews as a very successful and practical coating.
Breathability. The structure of the canvas allows it to “breathe”. Thanks to this, after pasting the walls, the risk of the appearance and development of fungus is eliminated. In addition, a favorable microclimate is created in the rooms.
Fire safety. The coating is resistant to fire and prevents its spread. In this regard, the material is often used to decorate the walls of evacuation routes at various public facilities. In an apartment, this characteristic will also not be superfluous.
The fiberglass canvas can be repainted approximately 30 times.
One of the main advantages of this wallpaper is its ease of care. To clean the surface of the canvas, it is allowed to use various chemicals and use a mechanical cleaning method.

Wallpaper color

Designers divide wallpaper not only by technical characteristics, but also by aesthetic effect and color.

Light wallpaper. White and beige canvases are often used as a base for painting. This is a great neutral background for any colors.
Colored canvases. Buyers are offered a huge range of colors to choose from, differing in saturation and brightness.

What types of glass wallpaper are there?

This is a coating of rare durability. Manufacturers assure that their products will serve the buyer for at least 30 years, without loss of consumer properties. They can be painted, not just once, but dozens of times. The technology for gluing them is practically no different from working with paper counterparts. They will not spoil the most sophisticated interior.

There are two main types of fiberglass wallpaper:

Fiberglass for painting. The fabric is so thin that it is called gossamer. Produced without patterns. It is used as a reinforcing coating for walls and ceilings with their subsequent painting.
Fiberglass wallpaper. Thicker fabric with simple patterns or jacquard. Used as a coating for painting.

Water resistance

On the market you can find 3 categories of glass wallpaper depending on their water resistance.

This designation is marked using a wave-shaped pattern.

One wave. Lowest moisture resistance. Such canvases should be cleaned as carefully as possible, without pressing hard on the canvas. Use suede.
Two waves. Average value. You will not damage the material by wiping it with a damp cloth.
Three waves. The highest rate. The wallpaper will retain its density even when cleaned using household chemicals. This wallpaper is recommended for kitchens and hallways.

Kinds

Taking into account various criteria, glass wallpaper can be divided into several types.

Texture

The smooth texture is an ideal surface for painting. In this case, the wallpaper is a kind of cobweb that will smooth out all the existing cracks and unevenness on the wall. This surface is multifunctional.

The relief texture is a porous heavy structure with high density. Wallpaper with this texture is intended for finishing walls, and it does not deform or stretch.

Glass wallpaper – Paris Lux 10

Glass wallpaper – Sydney Lux 4 Luxury BauTex

Popular drawings that you can find:

cobweb;

matting;

diamond;

herringbone;

Quality

Based on quality, glass wallpaper can be divided into three grades:

first;
second;
Economy class.

First grade coating is of high quality and has a long service life. Wallpaper density is about 120 g/sq.m. Accordingly, the cost of such a decorative coating will be high.

Second-class wallpaper can behave unpredictably in everyday life. The average quality of the coating will be noticeable only in non-standard length of the canvas. Some foreign manufacturers of second-class glass wallpaper produce canvases of fairly high quality.

Wallpaper of the latest, economy class, is not of good quality, long service life, or density. However, due to its low price, this coating is very popular.

Number of layers

Based on the number of layers, fiberglass coating can be divided into:

single layer;

two-layer;

decorative layer and backing.

Photo ideas in the interior

For the bathroom

Fiberglass wallpaper will be a good finishing option for a bathroom. They are not afraid of moisture and will not allow fungus and mold to appear.

For greater strength and reliability, the fiberglass fabric is coated with washable paint.

For kitchen

A big advantage can be considered the high fire resistance of glass wallpaper.

In the kitchen, this fact is very relevant. At high temperatures, fiberglass sheets do not emit harmful substances. In addition, replacing glass wallpaper will cost less and the work will be easier. Suitable for finishing the dining area.

In the toilet

In the toilet, as well as in the bathroom, it is important to minimize the possibility of mold and mildew. Fiberglass wallpaper will help with this; they will be a good alternative to tiles. In addition, their cost is lower than tiles.

In the hall

The strength of the fiberglass material will eliminate mechanical damage to the surface, and the waterproof coating is easy to care for and keep clean.

On the balcony

Fiberglass wallpaper is not afraid of changes in temperature and humidity; it will be a practical solution for finishing a glazed balcony or loggia.

The nuances of pasting the ceiling

You can apply wallpaper on the ceiling using the same technology as for walls. However, there are several nuances:

The trellises should be light - for this purpose it is better to use fiberglass web. Fiberglass glue does not withstand vertical tearing;
you need to glue from the window to the opposite wall - the joint is not so noticeable;
you need an adhesive specially designed for fiberglass - other types of adhesive do not have enough adhesive force to hold the trellis on the ceiling;
the adhesive mass is applied only to the surface of the ceiling;
glue for the next strip is spread after gluing the previous one;
gluing is carried out end-to-end, going onto the walls. The option of overlapping gluing is not used due to the difficulty of cutting the double sheet. That is, what can be done on the walls does not go to the ceiling;
After the glue has partially dried, the trellises that have entered the wall are cut off. Many craftsmen advise carrying out the operation after the glue has completely dried. But then problems arise with removing the scraps - after all, they partially stick to the wall.

Important: When removing scraps of wallpaper from the wall, you need eye protection, as shards of fiberglass fly in all directions.

Tips for caring and washing wallpaper

The glass wallpaper material itself is quite durable and can withstand various cleaning methods. The method must be selected depending on the paint covering the surface.

Non-abrasive detergents can be used to remove stains from the glass cloth surface.
depending on the moisture resistance of the paint, you can use soft suede or a brush,
For preventive maintenance, it is enough to remove dust with a dry soft brush.

How to paint correctly?

Which paint to choose?

For painting fiberglass coverings, water-dispersion paint is best suited. The choice is due to the absence of toxic substances, quick drying and the absence of unpleasant odors. Depending on the type of room, you can choose acrylic, styrene-butadiene or latex-based paint.

Step-by-step painting instructions

Painting glass wallpaper has a simple procedure. However, its strict adherence helps to achieve an ideal result.

Preparing the room and tools. Cover the floor, radiators and baseboards with film or newspaper.
The walls are primed, after which you need to wait until completely dry,
the corners of the room are painted with a brush,
walls are painted using a roller,
To ensure smooth application, avoid interruptions. Paint applied to an already dried surface will be visible at the border.
The second layer is applied after 12 hours.

Video

Photo gallery

Glass wallpaper is a practical and at the same time beautiful method of interior decoration. The high strength of fiberglass material allows you to decorate any room, and the safety of their composition makes it possible to decorate a children's room or balcony without worrying about the release of harmful substances.

At the same time, the material breathes and protects against mold.

What's in the package?

Rolls of 1st grade glass wallpaper have a standard width of 1 m. The length of the panel is 25 m (China) or 50 m (Sweden). Rolls are packaged in cellophane and have end caps to protect them from damage. The front label indicates the country of origin and information about the material. Instructions are printed on the inside.

Glass wallpaper of the 2nd grade has any manufacturing defects or non-standard length. The label does not indicate the brand, it is grade 2, and the length of the roll is entered by hand. The roll may consist of several pieces.

Popular brands of glass wallpaper

Today the following brands are very popular:

Vitrulan . High-quality German wallpapers that offer a large selection of different collections.

Welton . Natural wallpaper with a designer line. Produced by the Alaksar group of companies. Production: Germany, Sweden, Finland.

Nortex . They are classic options with matting, herringbone, diamond, etc. They are produced in Russia, part of the technological process is concentrated in China.

Tassoglass . An American brand that has received great recognition thanks to its large range of textures.

X-Glass . Russian wallpaper with Finnish production. Middle price segment.

Bau Master . China. They are distinguished by affordable prices and good quality.

Waltex.
Veterman.
Mermet.

Wallpaper made in China, which has proven itself on the Russian market as a budget-friendly and good decorative covering.