The process of plastering walls yourself - description, tips for beginners

Many people know what plaster is. This is a finish that gives the building a complete look, serves to protect structures from adverse influences, and extends the service life of the structure. You can entrust this to professional plasterers, but even a beginner can plaster walls with his own hands.

This requires practice and knowledge of some basics. And skill comes with experience. What is plaster used for? How to plaster walls in a new building? What is needed for plastering walls? We will try to answer questions that are important for a beginner here.

Why do you need to plaster the walls in your apartment?

Even a loft-style interior is just an imitation of untreated wall surfaces using concrete-like plaster. Plastering walls in an apartment solves many problems in a comprehensive manner.

Plaster coating:

• strengthens brickwork;
• protects concrete and aerated concrete surfaces from the penetration of moisture from the air;
• prevents the formation of fungal or moldy lesions;
• protects wood from cracking, rotting, insects, rodents;
• levels uneven surfaces of walls and ceilings;
• serves as additional insulation;
• absorbs noise;
• creates a comfortable microclimate in the apartment;
• monolithizes the internal surface of the apartment, sealing the seams and joints of structures;
• protects wood from fire;
• protects building structures from external influences;
• Levels surfaces in accordance with state standards, which makes tiling or plasterboard, wallpapering, and painting easier.

Replacing a wall or partition is more expensive than replacing or repairing plasterwork. Modern plaster compositions are durable - service life reaches 25 years or more. Plastering the walls of a house simultaneously solves many problems.

Surface preparation before application

The principle of surface preparation for applying textured plaster:

• We clean the surface, remove all fasteners, and cover up cracks and recesses.
• Remove dust using a vacuum cleaner or broom.
• We prime the wall in 2 layers.
• We cover the floor and furniture with protective film.

Important! Application of smooth compounds requires appropriate smooth and even walls. If the condition of the plaster leaves much to be desired: the coating is old or crumbling, then it is necessary to plaster the walls from scratch.

What are the application methods?

Depending on the size of the surface to be plastered, as well as the included components, methods of applying plaster can be:

• manual (trowel, roller, trowel, ladle or just hands);
• mechanized (using a hopper, plastering machines).

The choice of application method is often dictated by how much plaster can be applied per pass. When performing work manually, some types of mixtures are applied in a layer up to 6 cm thick. Mechanical application is limited to creating a layer of up to 20 mm.

Among the manual methods of plastering walls, there are different application methods:

• technical (leveling) finishing with or without beacons;
• decorative (application with various tools, shaping the surface using various techniques) finishing.

Manual application

Plastering walls with your own hands involves applying a solution to the base with a hand tool, leveling, smoothing or forming a textured surface in one pass, or sequentially creating a multi-layer coating. Manual plastering of walls is usually carried out with a small coverage area, a total thickness of the leveling layer of up to 10 - 12 cm, and a final textured finish. With multi-layer finishing, each layer is dried.

Mechanized application

It is rational to use this method of performing plastering work when there is an optimal combination of plastering speed, low cost of materials (part of the money is saved on expensive machine work), and a large volume of coating.

Tools needed for manual plastering of walls

When you already have all the materials, before the plastering process itself you need to make sure you have all the necessary tools:

• trowel for applying the mixture;
• falcon for simple plastering and holding a portion of mortar in a canopy;
• scraper;
• cutting tool - a small triangular spatula, used to seal small cracks in the plaster;
• trowel - a board with a handle for applying and leveling a layer of plaster, as well as for more thorough plastering of corners;
• h-shaped rule for leveling the solution and controlling the uniformity of its application;
• trowel for grouting the already applied layer of plaster;
• paint roller.

Tools needed to prepare the solution

So, we figured out what and in what proportion is needed to prepare the solution. Now you need to know what materials you will need in order to carry out the entire process correctly and accurately:

• container for mixing all components;
• dispenser for measuring the volumes of all components;
• a construction mixer, a special attachment for a drill, a trowel or any other handy tool to mix the resulting solution.

How to prepare walls for plastering

Beginners will need to know how to prepare walls for plastering. Preparing walls for plastering begins with an inspection.

Need to find out:

• what material are the walls made of?
• how strong is the foundation?
• how tightly the plaster coating, if any, holds;
• are there any peeling places (check by tapping);
• are there any other defects that require elimination;
• How smooth are the walls themselves (measurements are taken).

General preparation

According to the standards, the base for plastering must be dust-free, free from foci of biological damage, oil and rust stains, efflorescence, and uninsulated metal parts (staples, nails, screws). The plaster coating has a considerable specific gravity.

Before plastering the walls, they make notches with their own hands and deepen the seams to increase adhesion. The base is primed and then dried. In addition, preparation includes the installation of beacons if plastering is carried out along them.

Priming walls and installing beacons

Removing old plaster

If the old plaster coating is durable and adheres well to the wall, plaster the walls using the old plaster. The coating unnecessary for subsequent finishing is removed completely. This is required when the old plaster cover is severely damaged.

Before removing the finish, it is wetted using a sponge. If there is drywall under the plaster being removed, then it can be easily tapped. Having tapped and chipped the partially exfoliated area, peel off the adjacent plaster by inserting a corner of a spatula or chisel under it.

For complete dismantling you may need:

• Bulgarian;
• hatchet;
• hammer;
• putty knife;
• perforator;
• scraper;
• spray;
• safety glasses, respirator.

Necessary tools for dismantling old plaster

Sequencing:

• wet the plaster coating, give it time (15 - 20 minutes) to soak;
• use a spatula to check the looseness of the layer;
• remove the layer using possible means (with a spatula, chisel, hatchet, or sawing the finish into squares with a grinder, followed by chipping it off with a hammer drill with a chisel attachment).

How to prepare a concrete wall

Often inexperienced people have problems when plastering concrete walls with their own hands. Not every plaster solution adheres well to a base of this kind. Previously, plaster mortar was applied to concrete surfaces without the use of primers. Therefore, there is a possibility that the old coating may fall off the concrete wall along with the new one.

To prevent this from happening, the old finish is completely removed from the concrete walls. When the structure is exposed, the joints of the wall panels, which were usually simply covered superficially, are also exposed. Hollow joints are filled with foam before sanding.

Foaming concrete slabs and scoring before plastering

Also, before plastering, notches up to 3-5 mm deep are applied to the concrete surface with a hatchet, chisel, bush hammer or hammer. To apply notches, a light jackhammer with a bush hammer attachment is sometimes used. Unevenness increases the adhesion of dense concrete bases to joints.

If the electrical wiring is planned in grooves, then its installation is done before plastering. Fastening elements, such as hanging hooks, are installed in advance.

This eliminates unnecessary labor, time and materials costs later.

Preparing a wooden wall

Wood especially needs preparatory work. It is not always rational to apply notches. Therefore, before plastering, wooden bases are covered with shingles - thin slats no wider than 20 mm. The shingles are nailed to the surface of the base, placing the slats at an angle of 45 degrees to the floor, at a distance of about 4.5 cm from each other.

The narrow or crooked shingles are filled first. The second row of shingles is nailed crosswise on top. To prevent the planks from splitting during the nailing process, the ends of the shingles are soaked.

In addition, at the ends the slats are not nailed close to each other, leaving a gap of 2 - 2.5 mm. Stuffing nails with wire weave along them helps to do without shingles.

To increase the heat and sound insulation of plank partitions, the boards are covered with burlap or matting before attaching the shingles, lowering the woven material until it touches the floor. Having nailed it along the bottom, tighten and attach the upper end.

These materials adhere well to solutions, serve as additional insulation for boards, and reduce wetting and warping of the boards. Then the plaster coating cracks less. The edges of the fabrics are overlapped.

Preparing a brick wall

In brickwork, before plastering, masonry joints are deepened by about a centimeter. This is done with a chisel, holding the tool at an angle of up to 45 degrees to the surface along the seam line. Bricks are cleaned from contamination with metal brushes. Then the wall is washed.

If, after washing with detergents, greasy or tar stains or efflorescence appear, they are treated with special agents or mechanically cleaned until the material is clean. After preparation, the base is dried.

Aerated concrete, gas block, foam block

How to prepare walls from these materials? It would seem easier with them. All protruding irregularities are ground off with a float designed for aerated concrete or a plane. After removing the dust, apply primer with a brush or from a sprayer twice. Dry between priming, allowing crystals to form and fill the surface pores.

Priming the wall

Installation of reinforcing mesh

Installation of beacons

Partitions and walls made of foam and gas blocks do not shine with strength, therefore they can crack at the slightest subsidence of the foundation. To strengthen the surface, it is reinforced with a fiberglass mesh, which is attached to a 2-3 mm layer of tile adhesive. The glue is spread with a spatula and stretched with a trowel. Apply glue in a strip about a meter wide. Apply a strip of mesh to it, smoothing it from the center of the strip up and down.

Having installed the grid, beacons are installed. Before plastering, apply a layer of glue on top of the mesh with a spatula, combing it (to increase adhesion) horizontally with a notched trowel. Dry it.

Arbolite slabs

Due to their roughness, wood concrete slabs always adhere well to the plaster finish. Therefore, no additional measures are required. Some plasterers attach a metal mesh to the wood concrete to strengthen the wall itself.

Whitewash

It is impossible to plaster over lime whitewash, because the coating will not adhere firmly. Whitewash is always multi-layered, and plaster adheres only to the upper lime film.

Whitewash is removed in several ways:

• remove with a spatula (wet, painstaking method) - moisten the areas, after 15 minutes remove the soaked lime;
• remove with a grinder (the disadvantage of this method is that there is a lot of dust, you need to work in a respirator and goggles);
• Apply the paste with a brush in a thick layer to the whitewash. After drying, the pasty crust, which holds together the multi-layered lime mortar, is removed with a spatula (the most dust-free method);
• wash off with a soap solution (half a piece of grated soap in a bucket of water, 5 tablespoons of soda), repeatedly wetting the whitewash with a sponge or brush;
• washed with acid solutions.

Required tools and materials

List of what will be needed for plastering:

1. for preparing the solution - containers, mixer, mortar mixer;
2. for application - spatulas (in simple terms - spatula), ladle, trowel, trowel, rollers, brushes;
3. for stretching, leveling - grater, grater, rule;
4. for priming, forming a relief pattern, painting: rollers, brushes, brushes, sponges, stencils, other improvised means;
5. for measuring, marking, installing beacons - level, plumb line, tape measure, masking tape, cord;
6. for painting – brushes, sponge, rollers, spray bottle;
7. for protection – glasses, respirator, gloves, work clothes

Materials you will need:

• components of plaster composition, SS or ready-made compositions;
• water;
• primer;
• shingles;
• lighthouses;
• reinforcing mesh;
• fastening parts - dowels, screws, nails;

Required material for plastering

What tools will you need?

The job will require tools that most men know quite well and use for minor home repairs, which has a positive effect on their confidence and saves time on training.

According to experts, you can get by with a small tool kit, which includes:

• Laser construction level, tape measure, square,
• Rule, smoother, spatula, trowel, paint brush,
• Hammer, chisel, iron bristle brush,
• Construction drill and container for mortar,
• Protective clothing, mask, goggles.

What is lighthouse plaster?

The technology for plastering the walls of a house includes options:

• under the falcon (alignment without rules, by eye);
• as a rule (does not allow you to easily achieve high evenness of the walls);
• along the lighthouses (high-quality finishing).

It will not be possible to plaster a crooked wall with high quality by eye (without beacons). Therefore, the falcon-like wall plastering technology is used only in new buildings with improved quality walls, or in utility rooms where the quality of the surface is not important.

A lighthouse is a plank, the surface of which serves as a guide for the rule, moved by the plasterer when leveling the mortar applied to the wall. Lighthouses are made of metal, plastic, wood, or mortar used for plastering. The beacons have a shelf height of 6–10 mm and are attached to the base with mortar or self-tapping screws.

The installation of beacon strips is carried out plumb or level strictly vertically after priming. First, the outer beacons are placed 30 cm from the corners of the walls. The surface of the planks forms a vertical plane, focusing on which the intermediate planks are installed. The distance between the planks is made less than the length of the rule by 20-30 cm. For beginning plasterers, it is more rational to place beacons in meter increments.

When plastering over beacons, the mixture is applied in layers until the solution rises above the planks. The protruding mortar mass is cut off with a rule tightly pressed to the beacons, moving it in a zigzag manner.

The excess is removed from the rule with a trowel or spatula and placed where the mixture is missing. As a result, the surface of the leveling solution forms a vertical plane. After the mixture has set, the beacons are removed, and the remaining grooves are filled with plaster mortar.

Purpose and advantages of beacons

Lighthouse – metal profile . The element is mounted vertically along the wall. The craftsman applies a layer of plaster to the level of the lighthouse and levels it out. It's much more convenient.

Beacons can be removable or non-removable . The first ones are less than 6 mm in diameter. After plastering, they are carefully removed from the still fresh mass, and traces of them are rubbed off with a trowel. A profile with a diameter of more than 6 mm is left in the wall.

Beacons are attached according to markings. The first profile is fixed at a distance of 20 from the edge of the wall. The rest are mounted at a distance of 1.1–1.2 m. They place the profile on the plaster. A thin layer of plaster is applied to the marked places on the wall and the beacon is pressed into it. A level is used to check the verticality of the element and compliance with already installed beacons.

To prevent distortions, measurements are taken vertically, horizontally and diagonally.

Plaster reinforcement

Mineral plaster compositions do not have elasticity, and therefore, like natural stone materials, they can crack at the slightest movement of the base and form cracks during the hardening process, for example, if the plaster solutions are greasy. In order to reduce crack formation and their opening, the plaster is reinforced.

The same is done when repairing large cracks. The use of reinforcement increases the strength of the finish. Installation of nets is necessary in problem areas, for example, at the junction of bases made of different materials, for example, walls made of wood and concrete. Different characteristics of materials cause them to behave differently when temperature or humidity changes. Consequently, cracks will form in the joint area.

For reinforcement, meshes are used from:

• metal;
• plastic;
• fiberglass;

The choice of material and cell size of the reinforcing mesh depends on the main purpose of the reinforcement and the installation location. If powerful meshes are installed to reinforce facade finishing or create a plaster casing for insulation slabs, then for interior finishing, as well as where the plaster layer is small, plastic or fiberglass meshes are used.

Grids are a hidden structural element located in the body of the plaster closer to the surface. If the plaster coating is thick, two or more meshes are installed. When attaching the mesh to a wall or ceiling, a gap is left between the mesh and the base, which is filled with adhesive or plaster. This is done so that there are no air bubbles left around the mesh panel. The mesh must be recessed.

To secure the mesh to the walls, its panels are stretched, nailed or attached with self-tapping screws. Adjacent canvases are overlapped. It is important to tighten only so that there is no sagging, so that the wall does not turn out crooked. Do not overtighten.

If the mesh material can corrode during a chemical reaction, for example, with lime plaster, the mesh is protected by covering it with asphalt or coal tar varnish, oil paint, or laitance and drying.

Pros and cons of gypsum mixtures

Gypsum mixture is the most advantageous option for beginners. Easy to apply, adheres well to the surface, dries quickly. Due to its low weight, it can be coated with a thick layer to enhance sound and heat insulation.

The result of the work is a smooth, even wall, without cracks, will satisfy an inexperienced worker, and will save time, because will not require additional puttying and cleaning the room from dirt.

The main disadvantage is the main property of gypsum, it absorbs liquids well. Therefore, such mixtures are not used when finishing the walls of swimming pools, bathrooms, toilets, and street facades. The life of the gypsum solution is quite short, it must be used within 20-25 minutes.

Preparation of the solution

There are three possible options here:

• preparing the mixture by mixing the components yourself;
• dilution of the SS composition with water or a diluent;
• mixing the finished plaster dough before use (with or without adding a small amount of liquid).

If you prepare a mixture yourself from components purchased separately, then you need to follow the sequence of mixing the constituent substances.

DSP is prepared in the following order:

• Bulk dry substances (sand, cement powder, perlite, stone chips) are placed in the container;
• stir;
• prepare the liquid separately (lime milk, water with a plasticizer, etc.);
• while stirring, gradually pour the liquid into the dry mixture until the desired consistency of the solution is achieved;
• The composition is allowed to “rest” and brew for about 5 minutes, after which it is stirred again.

Preparation of dry mixtures

Mixing the solution

Ready-made solution
If the mixture is prepared in a mortar mixer, then it is permissible to first pour some water into it, then add other components. The remaining water is added little by little, controlling the consistency of the dough.

Purchased SS are closed following the manufacturer's instructions, which are in the detailed instructions on the package. The prepared mixtures in buckets are also mixed before use to restore homogeneity to the composition. If the plaster solution is painted, it’s time to add color.

Some plaster compositions have their own nuances. For example, perlite sand is very dusty. It is moistened before kneading. In addition to knowledge about the rules for preparing the base, you will need information about how to properly apply the plaster itself to the walls, in what sequence, how long and how it should dry.

How to apply plaster on walls with your own hands

The mixture can be applied by pouring and spreading. Plastering surfaces using the first method is more dense; the finish adheres more firmly to the base. You can throw the composition with a ladle, a spatula (trowel) with a steel blade. The solution is scooped out of the container and thrown from the tool onto the base, where it lies down and sticks like a thick blot - a “slap”. Spread the dough with a spatula, trowel, or falcon.

The solution, applied to a spatula or trowel with an auxiliary spatula, is transferred to the wall with a stroke of a specified thickness. The plasterer places the tool with the dough against the wall at an acute angle, and moves it along the wall, decreasing the angle as the material is transferred to the base. If the smear begins on a previously made smear, the technique is called “wet to dry.”

If a smear begins on a dry spot and ends on another smear, the technique is called “from dry to wet.” Compliance with the techniques is important for decorative plaster. How to apply the final decorative finish can be found in another section of the site. Below we offer a detailed description of the method for performing rough finishing on concrete.

Collecting tools

Every construction or repair job begins with the purchase of materials and tools. You will need:

• rule and cutter;
• spatula and smoother;
• trowel and trowel;
• roller and container with brush;
• polyurethane grater;
• container for mixing the solution;
• powerful electric drill with mixing attachment;
• window covering film and masking tape;
• level, preferably laser;
• cement and sand;
• hammer drill with a blade-shaped attachment;
• hammer;
• garbage bags and protective equipment;
• primer.

Plastering corners

The words “husks” and “usenki” will not say anything to an ignorant person. Meanwhile, these are professional terms for plasterers, denoting internal and external corners, respectively. The technique for plastering them differs from applying plaster to walls.

The main techniques used by plasterers:

• using a profile corner;
• with lighthouses;
• with a counter-piece (perforated corner with an aluminum base));
• with serpyanka (ribbon mesh made of fiberglass or synthetics with an adhesive layer);
• without a contrarian.

Counter-shuls can be used to produce husks and usenki.

Step-by-step technology for making an angle using a contra-sharp:

1. Cut the perforated corners to the required length.
2. A contact solution is applied to the corner in a thick layer (the mixture is stretched along the entire length along the inner corner).
3. The corner is placed against the corner, pressed most tightly in the most “protruding” place, then using the rule, the counter-shoulder is pressed so that it stands strictly vertical (check with a level or plumb line).
4. The excess mixture released during installation is removed with a spatula. After this, the mixture is allowed to harden.
5. After installation, the corner is aligned with the wall using a test. The corner shelves end up inside the plaster mortar. The corner counter protects the protruding corner from damage.

Applying contact solution

Installation of the corner

Removing excess solution

Aligning the corner with the wall
Making an external corner along a profile corner:

1. Cut the profile corners to the required length;
2. Beacons are installed on adjacent walls (the corner is plastered before work on the wall is completed);
3. A contact solution is applied to the corner in a thick layer (the mixture is stretched along the entire length along the inner corner).
4. Next (thicker) soil is applied on both sides from the corner to the nearest beacons.
5. The corner is placed against the corner, the mesh is pressed against the mixture, using the rules, the solution is leveled along the beacons on one, then on the second wall.
6. The excess mixture removed by the rule with a spatula is added to where it is missing.
7. The profile corner and the mesh are inside the plaster layer.

Recommended Blends

Among the popular brands of wall plasters, we will consider the most popular ones. It is necessary to select building materials taking into account the characteristics of the base that will be plastered.

KNAUF Rotband

KNAUF Rotband Construction multifunctional mixture
Construction multifunctional mixture based on gypsum with polymer additives. Has leveling properties. It is applied to concrete, brick walls, as well as surfaces made of polystyrene foam and cement without prior use of a primer.

The consumption of plaster from a German brand is almost half that of a conventional cement-sand composition - approximately 8.5 kg per 1 sq.m, provided that the layer is no more than 10 mm. It is possible to apply a layer of up to 50 mm without previous spraying.

The plaster mixture is sold in bags weighing 30 kg. The cost of one package is about 410 rubles.

Weber Vetonit Profi Gypsum

Weber Vetonit Profi
Basic building material based on gypsum. Used for leveling walls and ceilings indoors. It has good adhesion to any substrate - wood, concrete, etc.

Consumption is economical - from 8.5 to 10 kg per 1 sq.m. with layer thickness up to 15 mm.

Standard packaging is a 30 kg bag. Approximate cost: 390-420 rubles.

Forman 61

Plaster Forman 61
Cement-based plaster, suitable for rough and basic finishing for interior and exterior work. Easy to apply, similar in properties to similar gypsum mixtures. Can be applied to any substrate with varying degrees of unevenness.

Consumption – up to 14 kg per 1 sq.m. with a lining thickness of 30 mm. It is possible to apply repeated layers up to 10 mm.

Sales - in bags of 25 kg at a price of 220 rubles.

Veber Vetonit TT40

Universal mixture Veber Vetonit TT40
Universal mixture for basic leveling of external and internal wall surfaces. The basis of the composition is cement, there are quartz additives. Suitable for concrete, foam concrete, brick surfaces, as well as for walls made of expanded clay concrete blocks. Not recommended for use on polymer substrates.

The mixture is consumed very economically - 1.7 kg per 1 sq.m. with a layer of 5 mm. You can apply a layer of up to 40 mm, while the drying time of the solution increases to 2 days.

Plaster is sold in 25 kg packs, the cost of a bag starts from 280 rubles per bag.

M100 Besto

Construction mixture M100 Besto
Construction mixture based on cement and lime. Used for interior work and exterior wall decoration. Has leveling properties. Suitable for concrete, wooden bases.

Dry material consumption – 17-18 kg per 1 sq.m. provided that the layer thickness does not exceed 10-12 mm.

Plaster is sold in bags of 25 and 50 kg, the price is from 125 kg per 25 kg bag.

How to check the quality of wall plaster

The accuracy of the finishing is checked using a rule or a long two-meter strip. When carrying it along the surface in different positions (horizontally, diagonally or vertically), deviations from the plane are detected visually. In the dark, you can check the quality of the plaster by directing the flashlight beam parallel to the plane of the wall. Long shadows will reveal protruding irregularities.

By measuring and comparing the two diagonals of the room, you can check whether the corners of the room are right. The diagonals must be equal in length. The distance between parallel walls is the same along their entire length. The correctness of the angle can be checked by drawing vertically along a square with a side length of 50 cm.

The quality of the finishing surface is determined visually. There should be no darkening or other kinds of stains on it. The sashes of windows, vents and doors must open without interference. The areas around sockets, switches and door frames, along the perimeter of the floor must be level so that the overlay strips, baseboards and trims fit tightly against the wall.

If you are planning to renovate your apartment, but you do not have experience covering walls with plaster yourself, you should not despair. After reading the information presented and watching the videos, you have gained an idea of ​​the main types and techniques of plastering work.

Detailed information about plaster compositions and how to apply decorative solutions can be found on the website. When contacting plasterers, you will know what to pay attention to, how the work should be performed, and why this or that stage is needed.