TOP 15 best putties for walls under wallpaper: 2022 rating and which one to choose

In order for walls covered with wallpaper to look beautiful, the walls must be properly prepared and carefully leveled. For this purpose, special putties are used, which not only make the surface of the walls smooth and even, but also effectively hide all defects.

High-quality putty should adhere firmly to the wall, and additional coatings should adhere well to it, be it paint, wallpaper or other finishing material. Accordingly, when choosing a putty, it is necessary to take into account what surface it will be applied to, what components are included in the composition, and how effectively the finished mixture will fill the unevenness.

To make choosing a putty easier, we have compiled a list of parameters that people pay attention to when choosing, and a rating of the best putties for walls under wallpaper according to the 2022 version.

Rating of the best putties for walls under wallpaper in 2022

How to choose putty for walls under wallpaper in terms of price/quality ratio?

To prepare the walls for subsequent wallpapering, a special type of putty is used. It applies easily and evenly to the walls and dries quickly. In addition, in most cases the finished coating does not need to be further rubbed to level it.

Among other parameters, pay attention to:

1. Consistency. Most inexpensive putties are sold in the form of a dry powder, which is diluted with water immediately before use. If your budget allows, it is better to buy an already prepared mixture. It is completely ready for use, and the owner can be sure that the putty will have the optimal consistency for uniform application.
2. Surface. Putty is chosen based on the material from which the walls are built. Concrete, brick, wood and plaster have their own compositions with optimal adhesion.
3. Basic component. To speed up finishing work, it is better to buy polymer putty. It comes ready to use, is easy to apply, dries quickly and does not require sanding. In dry rooms with a stable temperature, you can use gypsum putty. It is better not to use cement-based compositions. Despite their affordable price, they are difficult to apply, and the coating itself takes a very long time to dry and requires grouting.

When complete quality control is required

In the future, the dry mixture - putty for interior work - will not differ in any way from what is already ready immediately after purchase

Here are the two most important advantages:

• the price of plaster from a prepared dry mixture is noticeably lower compared to ready-made purchased;
• the quality of its preparation is completely under your control;

and, in addition:

• you can accurately determine the material consumption by mixing only the amount you need.

If the quality of the mix leaves much to be desired, then the dry putty mixture will let you know about it in lumps, almost like semolina porridge

Classification

Dry putty is divided into four categories:

• starting - used for initial leveling and applied in a layer of up to 2 cm, the main advantage of this putty is its rapid drying - instead of four weeks for ordinary plaster, a three-centimeter layer here will dry completely in five days;

• finishing - allows you to completely level the surface, its goal is unevenness of 1-3 mm;

Helpful advice! We do not recommend re-diluting with water or kneading any type of mixture that is already drying. If you need a new batch of batch, throw out the old one and make a new one from the beginning.

• special - these include mixtures for waterproofing and resistant to external chemicals, they are called acid-resistant;

• decorative - they are also called textured, they contain all kinds of fillers that give the resulting mixture a special color; Typically, such putty is applied in several cycles, each of which adds a new color nuance to the surface.

You can say it almost in verse - dry mixtures for wall putty are produced by everyone who is not too lazy - and hence the difficulty of choosing

The best inexpensive putties for walls under wallpaper

If the walls in the room are initially devoid of serious flaws, but they still need to be leveled before wallpapering, you can buy inexpensive putty.

Universal acrylic varnish

Despite the fact that this putty is inexpensive, it is provided in a ready-to-use form. It should be borne in mind that the product is not suitable for masking serious defects, although it boasts excellent adhesion.

Thanks to this, it can be applied not only to concrete and plaster, but also to brick walls. To ensure that the finish coat is perfectly smooth and the putty itself fills all defects, it is better to apply it in several layers.

Since the putty has a fairly thick consistency, it will not be difficult for the user to apply it not only to the vertical surface of the walls, but also to the ceiling. In this case, the product will not flow or splash. In order for the putty to adhere better to the surface, the walls must be clean and dry.

Specifications:

• dry in 24 hours;
• application material: concrete, brick;
• purpose: walls, ceiling.

pros

inexpensive but easy to use putty;

increased resistance to cracking;

very good adhesion.

Minuses

not suitable for wood.

TEX finishing Pro

If you need to quickly level the walls or ceiling for wallpaper or painting, but the budget for repair work is limited, you should give preference to this putty. Despite the affordable cost, it has the necessary characteristics for carrying out preparatory work.

The putty is provided in a ready-to-use form and can be easily applied using a regular spatula. In addition, the consistency of the putty is quite thick, so it is easily applied not only to walls, but also to the ceiling.

The product itself does not contain toxins and has no unpleasant odor, dries in about a day and does not crack after complete drying. Another feature of the putty is that it can be applied in several layers for perfect leveling, but you will have to wait until the previous layer has completely dried.

Specifications:

• dry in 24 hours;
• application material: concrete, plasterboard;
• purpose: walls, ceiling.

pros

cheap but high-quality putty;

Suitable for concrete, plaster and drywall;

does not flow when applied to the ceiling.

Minuses

For perfect alignment you need to apply several layers.

finishing Super

Using this putty, you can easily level the surface so that paint or wallpaper looks more attractive. The release form is a dry mixture, but instructions for preparing the working solution are given on the packaging.

Due to this, there will be no difficulties in preparing a solution of the required consistency. If the surface of the walls is uneven or has serious defects, it is better to apply the putty in several layers.

It should be borne in mind that, despite good adhesion, each layer of putty needs to dry well. Each layer dries for about a day, and to obtain a perfectly even coating, all layers need to be sanded. Because of this, the duration of finishing work can be long, but this disadvantage is compensated by the affordable cost of the product.

Specifications:

• dry in 24 hours;
• application material: plasterboard;
• purpose: walls, ceiling.

pros

does not flow when applied to the ceiling;

even beginners do not have any difficulties preparing the working solution;

does not smell and does not contain toxins.

Minuses

Supplied without spatula.

Examples and batch

Dry putty also differs:

• for internal and
• for external work - facade.

And in terms of composition:

• adhesive;
• oil-glue;
• alkyd;
• latex;
• dry mixes.

Packing is carried out in bags weighing from 5 to 30 kg - each one must have instructions for use.

Examples for interior work

Here are the market offers for dry mixes for indoor work (the type, weight of the bag and cost in rubles are given):

• Vetonit KR – finishing / 25 / 530;
• Vetonit LR+ – finishing / 25 / 560;
• Vetonit VH – finishing, gray / 25 / 550;
• Vetonit VH – finishing, white / 25 / 715;
• Pufas No. 3 – starting / 25 / 900;
• Knauf-Uniflot – finishing / 25 / 1020 – has special strength due to the admixture of polymer substances;
• Knauf Fugenfüller – finishing / 25 / 360 – based on gypsum and recommended for seams between sheets of drywall;
• Osnovit T-31 GRAYSILK – finishing, cement / 25 / 297;
• Found T-32 BELSILK – finishing, white / 20 / 338.

There is one strict rule - façade putty (pictured) should never be used inside

Examples for facade work

And now, the two most famous representatives on the market of façade dry putties:

• Glims-200 – finishing / 15 / 460;
• Glims-2000 – finishing / 25 / 500.

Preparing the batch

To prepare a solution from a dry mixture you will need:

• capacity for work;
• container for washing accessories;
• putty knife;
• a drill with a mixing attachment or, simply, a mixer.

The preparation steps to answer the question of how to dilute dry putty will be very simple, which, by the way, are always indicated on the packaging:

• pour the required amount of dry mixture into a bucket;
• pour half of the prepared amount of water there;
• First, mix everything in a bucket with a spatula;
• then the mixer comes into play;
• while working with the mixer, add all the remaining water to the mixture in equal portions;
• finally mix everything and
• let the prepared mixture sit for 5-7 minutes before using.

Some nuances

When preparing the batch, it is recommended to keep the following nuances in mind:

• if the putty is starting, then 400 ml of water is usually taken per 1 kilogram of dry mixture;
• if you are preparing finishing putty, then you need to take 100-200 ml more water;
• in order not to be mistaken with the consistency of the result, bring it to thick sour cream;
• gain experience in the required amount of dry mixture in accordance with the work being performed - you need to prepare as much as you have time to produce before the solution sets; repeated dilution and use is unacceptable;
• the approximate hardening time of the prepared putty is 1 hour;
• usually one batch consists of 3 kg of mixture and 1.2 liters of water;
• depending on the rough surface, it usually takes about seven and a half kilograms of dry starting putty per square meter;
• for the finishing one, this consumption figure is significantly lower - 1.2 kg.

Which company should you choose?

It is not recommended to buy cheap putty from a little-known brand. It is possible that even after proper dilution, the composition will turn out to be too thick or thin, and the dried coating will become covered with cracks.

We analyzed the assortment of the modern market, studied reviews from users and professional builders, and found that in 2022, the companies TEX, KNAUF, Weber, PUFAS, Rusean, Ceresit, DANOGIPS and Lakra were recognized as the best manufacturers of putties for walls under wallpaper.

Form and method of application

Putties are offered in loose form for mixing with water or as a ready-to-use mass. The latter form is more convenient, and the use of such a product allows you to speed up the work.

Similar to another parameter - method of application. This can be manual or machine control using a unit. Machine application is much faster, especially for large surfaces.

• Traditional cement-lime putties are especially valued for their durability, but it is worth remembering their other advantages.
• Their very good adhesion makes them an ideal base for painting, as well as for all types of cladding, such as wallpaper or ceramic tiles.
• They are suitable for any interior and any conditions - for the kitchen, living room, corridor or children's room, and due to the fact that they are waterproof, also for rooms with humidity above 70%, such as bathrooms.
• Each putty has a minimum and maximum layer thickness specified by the manufacturer. Usually it is 2-3 mm.

It is also worth paying attention to the maximum allowable size of individual cavities. The standard is 3 mm, but you can also buy plaster that can be used to seal 20 or even 30 mm of unevenness.