The most common methods of combating corrosion
There are several ways to coat metal surfaces to prevent them from rusting. These methods will allow you to extend the life of iron objects and parts for a long time. One of the most effective methods is treatment with chemical-based substances.
This category of compounds includes inhibitors. They are applied to the metal in a barely noticeable thin layer. Thanks to this coating, the product will not rust. Most often, such drugs are used for preventive purposes. The following methods will also help prevent corrosion:
- removing rusty spots on parts mechanically;
- use of chemical-based products;
- use of anti-corrosion compounds;
- folk recipes.
Means for treating metal surfaces against rust Source ad-cd.net
More details about all the methods for preventing the appearance of rust on metal are described below.
Mechanical cleaning
Use a coarse sandpaper or a metal brush to remove corrosion from iron parts. The treatment can be carried out using the wet or dry method. In the latter case, the rust is scraped off by rubbing a brush or sandpaper on the metal.
As for the wet method, it is necessary to first moisten the surface of the parts in kerosene or white spirit. A sandblaster, grinder, grinder or electric drill with a metal brush as an attachment will also come to the rescue.
Cleaning the surface from corrosion can only be used on not very large areas of metal products. The best option is to use a sandblaster. But its high price can be an obstacle for the home craftsman.
Mechanical cleaning is used on small metal surfaces Source kraski-net.ru
Use of chemicals
If the question arises of how to coat metal against rust, then first of all, experts recommend turning to the help of chemical agents. There are two types of such preparations: rust converters and acid compounds. Of the latter, orthophosphorus is considered the most popular. They help clean the surface in minutes. It is not difficult to use acid; to do this, remove dirt from the iron surface with a rag, then remove the moisture and apply a barely noticeable layer of the product to the metal. Use a brush with silicone bristles.
Leave the acid composition on the surface for half an hour. During this time, a reaction will occur with the area damaged by corrosion. Clean the metal with a damp cloth and then a dry one until all traces of rust are removed. Remember safety precautions when working with acid-based anti-corrosion compounds. Use a mask, special glasses and gloves to protect your respiratory tract, eyes and skin on your hands. Cleaners containing phosphoric acid delicately remove traces of corrosion from metal parts and at the same time prevent it from appearing again.
Use gloves to protect your skin from anti-corrosion agents Source foods-ideas.com
As for rust converters, they cover the entire area of metal parts. This composition creates protection that will prevent corrosion in the future. The most popular converters today are the following:
- " Zinkor ". The composition forms a thin layer on metal objects. In addition, this composition restores the surface of iron objects.
- " VSN-1 ". Serves as a corrosion neutralizer in small areas. After application it turns into a gray film, which can be easily removed with a dry cloth.
- " B-52 ". This corrosion destroyer removes it from any metal surfaces, does not spread during use, and at the same time acts very quickly.
- Berner . This rust modifier is used for nuts, bolts and other small parts that cannot be removed due to corrosion.
- " SF-1 ". Can be used on parts made of aluminum, zinc or cast iron. Removes corrosion and prevents it from appearing again. The manufacturer guarantees that after treatment with this product you can forget about the appearance of rust for 8-10 years.
All of the above drugs are economically consumed.
Rust modifier "Phosphomet" Source prom.st
See also: Catalog of companies that specialize in paints and varnishes and related work
Use of inhibitors at home
For general users, the most affordable means of corrosion protection using inhibitors is to apply a primer compound to the target surface. This is a lightweight inhibitory coating, the effect of which is to prevent direct contact of water or an aggressive solution with the metal surface. Often paints and varnishes contain similar corrosion inhibitors. Substances used for such purposes are produced in factories. These include red lead for the same primer, solutions of zinc or iron orthophosphates, phosphate coatings, etc.
Other means
In addition, other products that help fight rust on metal are also popular among home craftsmen. Among them:
- Hi-Gear No-Rust;
- Permatex Rust Treatment;
- Autoprofi.
Below we describe how to coat iron to prevent it from rusting, how to use these preparations and how they differ from each other.
Hi-Gear No-Rust
This aerosol is economical in consumption and helps to increase the adhesive properties of materials due to the formation of a protective film on the metal. Use this anti-corrosion compound at temperatures between 5 and 30 degrees Celsius. The product is suitable for processing parts of building structures, as well as car bodies.
Hi-Gear No-Rust rust converter is suitable for even the oldest stains Source prosmazku.info
The drug has the following regimen of use:
- Before using the spray, clean the surface using any method (eg sandpaper or wire brush).
- Rinse the parts with water and dry with a dry cloth.
- Shake the bottle well. Spray the rust converter evenly over the entire iron area to be treated. Recommended distance is 15-30 cm.
Using anti-corrosion compounds from the Rocket Chemical line
This American company specializes in the production of chemicals used in everyday life. One of its activities is the production of products to prevent rust on iron. The following anti-corrosion compounds have earned the trust of consumers:
- Lithium grease with protective effect . Apply the product to a metal area to prevent and protect against rust. The manufacturer recommends covering rack and pinion mechanisms, cables, chains and door hinges with it. The thin film formed on these parts will not be affected by either snow or rain.
- Long-acting inhibitor . Parts of metal structures treated with this product will not be exposed to rust for 5-7 years. This drug becomes a salvation for those who are thinking about how to coat metal so that it does not rust in water.
Rust inhibitor "Likkor" Source prom.st
Protection of metal from corrosion by galvanizing in Steelproff
Advantages of ordering galvanizing at Metalbase Steelproff:
- Application of modern equipment and advanced technologies for anti-corrosion protection of metals.
- Work is carried out by qualified workers with extensive practical experience.
- Selection of the most profitable iron processing technology.
- Delivery of finished products in St. Petersburg, Leningrad region, and other regions of Russia.
Order metal galvanizing from our company -
We guarantee high-quality performance of work within the agreed time frame!
Video description
How to remove rust using Silit, watch this video.
Some home craftsmen use Coca-Cola or Pepsi to get rid of corrosion. These drinks contain phosphoric acid, which easily removes small rust stains. Wipe metal surfaces with liquids or immerse parts in them. Then rinse under running water.
Pepsi can easily cope with rust in small areas Source yandex.net
A mixture based on paraffin and kerosene is also popular. Take these products in equal proportions and mix. Apply to the surface to be treated in several thin layers with a sponge or brush. Leave it for at least a day. After the specified time, remove the mixture along with the rust with a rag, rinse with water and remove moisture with a rag or sponge. It is best to use this method for tools. Do not forget about a mask, gloves and safety glasses when processing with a kerosene-paraffin mixture.
