Paint for wood: tools and technology for applying paint for exterior or interior work, specific features

*This material is subjective in nature and is not an advertisement and does not serve as a purchase guide. Before purchasing, consultation with a specialist is required. About the selection criteria.

The requirements for interior acrylic paints are often much higher than for many others, since we come into contact with them every day. That is why the safety of the composition, environmental friendliness and the absence of a sharp, long-lasting odor come first. Most modern interior paints are produced in compliance with all relevant quality standards; they can be used in any room of the house, including the nursery and kitchen. The rating of the best wood paints for interior work in 2022 is presented below - it will allow you to decide on the ideal option.

Very often, work on painting wooden surfaces is carried out independently, so it is important that the paint is easy to apply, dries quickly and does not require complex devices for preparation and use.

Features of wood paint

What are wood paints used for? There are a number of factors that require regular monitoring.

Thanks to special compounds, it is possible to prevent the following phenomena:

• Fiber rotting. High humidity and improper use of a wooden product lead to destruction of the internal structure;
• Oxidation. Temperature changes and humidity provoke deformation inside the tree;
• Drying out. Solar insolation and high air temperatures lead to a reduction in product volumes;
• Discoloration. Ultraviolet rays change decorative qualities and reduce pigment saturation;
• Reproduction of mold and fungi. The absence of antiseptic components in the primer is accompanied by the proliferation of dangerous microorganisms.

Timely painting of wooden products allows you to extend their performance properties. In addition, a catalog of wood paint colors allows you to decide on the shade of the structure.

For work, impregnations and primer mixtures are used, which will help fix the finishing layer. By following an integrated approach, it is possible to achieve high-quality technical features.

Acrylic

This type of paint has absorbed the whole range of advantages: fast drying (no more than 8 hours), special wear resistance, insensitivity to climatic and atmospheric influences, good elasticity, which prevents the formation of cracks after painting, and lack of odor.

The unique properties of this material include vapor permeability, which allows the wood to “breathe”, that is, not to prevent excess moisture from leaving the room through the wooden walls, thus creating an excellent microclimate inside. Acrylic paint is almost an ideal option for wooden buildings.

What to consider when choosing

Which wood paint to choose for interior work? When selecting a decorative coating, it is recommended to take into account several criteria. They are as follows:

• Type of wood. Each type of wood has its own characteristic features, which appear immediately after staining;
• Exploitation. Each plane inside the room and on the facade of the building is exposed to all kinds of influences. When selecting paints and varnishes, one should take into account humidity, solar insolation, exposure to combustion products, temperature deviations, physical and mechanical deformation;
• Processing the base. For high-quality protection of wood and prolongation of its operational life, the use of primers is recommended. Thanks to them, the protective qualities of the coating are enhanced, ensuring alignment of the absorbent structure;
• Preliminary compositions. It is recommended to select a primer based on the composition of the paintwork. If the material is selected incorrectly, the likelihood of further deformation of the finished coating increases.

What should you protect wood from?

Like any other building and finishing material, wood has two main enemies - ultraviolet radiation and moisture. Under the influence of sunlight, lignin, a substance responsible for density and strength, is destroyed. Consequently:

• wood permeability increases;
• under the influence of UV radiation, the natural color fades;
• a dirty gray tint appears;
• moisture penetrates into deep layers;
• the tree swells, it is “led”;
• mold and other biological lesions appear;
• The service life of wood is reduced.

If we consider wooden interior decoration or massive furniture, then it is influenced by ultraviolet radiation, albeit in smaller quantities, and moisture, and mechanical influences. Unlike plastic and composite, it is almost impossible to completely remove grease or dirt from an untreated wooden surface. In order for the wood to remain in its original form both in the house and on the street for as long as possible, it is necessary to use wood paint or another product, but always a specialized one, to protect it.

Types of paint and varnish coatings for wood

To work with a wooden base, use glaze glaze, antiseptic compounds, varnish, water-based impregnation, paint or enamel. Let's look at the advantages and disadvantages of each type of material.

Glaze coating allows you to view the structure of wood fiber. Thanks to these coatings, it is possible to convey the natural color of wooden surfaces and enhance the decorative properties.

• Alkyd and acrylic paints refer to the surrounding compositions. Yes, the production of these paints and varnishes uses various technologies.
• They can consist of an introductory and organic base.
• For example, alkyd and forest dyes are popular and affordable types of finishing materials.
• They are characterized by high performance properties. Acrylic dyes are considered durable and wear-resistant coatings.
• These odorless wood paints can be used for interior and exterior decoration.
• The advantages of these materials are their drying and minimal toxic evaporation.

Finish enamel or alkyd coatings are made using polymer resins. When dried, they form a dense layer that looks like a transparent crust. Thanks to it, resistance to various disasters increases. Alkyd enamel is considered an affordable option.

When applying a thin layer, the moisture resistance of the coating increases. As they dry, they release caustic fumes. Paints based on polyurethane resins have elasticity, as a result of which they resist mechanical deformation. This rubber paint for wood can be used for 10 years.

What is this article about?

In this article we will talk about the types of paints for interior and exterior wood treatment. We will make an analysis of the compositions, advantages and disadvantages, technological and operational characteristics. Find out how oil-based paints differ from water-based or water-dispersion paints. What are the application features of rubber, acrylic, alkyd paints, and which manufacturers can be trusted and which ones should not be trusted.

Requirements for paint and varnish coatings for facades

Which wood paint to choose for exterior work? When selecting, you must consider:

• Compound. No toxic compounds are used to produce these materials. The fact is that during the drying process they release a large volume of flexible compounds;
• Drying speed. Quality products dry within 5 hours after application. Each layer dries on average in 1-3 hours;

High performance. Conscientious manufacturers indicate the density of the paint layer, drying time and approximate service life. In addition, the instructions show favorable areas for the use of a particular composition.

Technology

The whole process takes place in 4 stages. At the same time, scrupulousness and attention are required to complete the work. It is important to do everything carefully, without leaving untreated areas.

Stage 1. Removing the old coating. This procedure is performed if there is an old paint coating. It needs to be removed. To do this, you can use spatulas, a wire brush, sandpaper or a grinder with an attachment. There will be quite a lot of dust, so you should work with glasses and a respirator.

All work is carried out in dry, not hot weather. The entire area of ​​the facade will have to be protected, including the joints of logs or boards. In order for the work to be completed efficiently and without delay, remove the drainage elements, shutters and trim from the facade in advance. In addition to old paint, dust and street dirt should be removed from the facade.

Important! You should not leave old paint on, even if the layer sits firmly on the surface. Its service life will expire and it will peel off along with the new coating.

Before painting the facade, remove the old coating

Stage 2. After the facade is cleared of paint, the wood is sanded and puttied. If there are areas of darkening, or pockets of fungal infection are visible, the top layer of material should be removed to a clean texture. The rest of the surface is leveled. Existing defects on the surface are eliminated by puttying. Before moving on to the next steps, the putty must dry. The putty material must be compatible in composition with impregnation and paint.

The top layer of wood is cleaned and sanded

Stage 3. Deep penetration impregnation is applied to the cleaned wooden surface, the composition of which is selected depending on the characteristics that require strengthening. Typically, impregnation is applied with a wide brush along the grain to preserve and emphasize the natural texture of the wood.

Do not neglect priming; impregnation will not only improve the quality of the wood, but will increase the adhesion of paint to the surface, while reducing the amount of material consumed. Even though wood primers are quite expensive, their use is worthwhile. Before applying the paint, the impregnation must dry; the period for complete drying is indicated by the manufacturer on the packaging.

For longer service life, the wood should be impregnated with certain compounds.

Step 4. Before starting work, check the long-term weather forecast. Rain is not suitable for painting, nor is heat. In addition, work should be carried out during the daytime, when the dew has either already evaporated or has not yet settled, that is, from 10 to 18 hours. The paint is applied in several layers along the fibers. Each subsequent layer should be applied only after the previous one has dried.

To paint a wooden facade, a wide brush is usually used.

Video - Technology of painting a wooden facade

Some nuances of coloring

It would seem that the process is quite simple and transparent. But here, as everywhere else, there are nuances:

1. If the facade has external metal fastening elements, then before priming and painting they should be filled with an oil or acrylic compound to match the color of the wood. This work will be especially relevant if the finishing coating is planned to be made transparent.
2. If you approach the issue carefully, you can use several impregnating compounds; water-repellent impregnation is applied last.
3. For better surface quality, after the impregnation has dried, the wood should be sanded to remove small roughness and lint.

You can improve the quality of a wooden surface by sanding the wood after applying the primer.

What is used for working with wood?

We invite you to familiarize yourself with the common types of paint and varnish coatings for treating wood frames. They are divided into:

• Acrylic compositions. They are enamel based on water-borne components. When in contact with a wooden base, they dry quickly and do not emit caustic compounds;
• Glazing coatings. They are used to emphasize the decorative qualities of wood. In addition, they have excellent protective qualities;
• Covering species. These include oil and acrylic types of paints. They are used to create a thick crust on the surface of the wood;
• Nitrolac. It is used as a decorative coating for wooden frames. The composition is highly flammable. They protect from solar insolation. In what area is it used? It is recommended to choose them for processing wooden parts in the construction of furniture or premises.

Oily

Until recently, this type was perhaps the most widespread. Its composition traditionally includes drying oil as the main ingredient with the addition of mineral dyes and various additives.

This product is well absorbed into the surface and forms a fairly durable coating, but at the same time it takes a very long time to dry (about 2 days).

At the same time, the painted surface is very vulnerable to sunlight and quickly loses its previous appearance. Before use, the solution must be stirred due to the formation of sediment.

Photo of paint for wood

Comparison table of characteristics

The table below presents the main characteristics of the paints in question for wooden surfaces. By comparing them with each other, it will be easier for the buyer to make a choice and purchase a quality product.