If you think that ordinary stretch fabrics in the interior can still surprise someone, then you are very mistaken. They can now be found in every second city apartment. In order to get the coveted WOW effect, you need something more, and this more is given to people by perforated stretch ceilings, photos of which sometimes make a simply stunning impression. The best options for perforated tension fabrics “prepared” using a special technology are in our selection today.
Advantages and disadvantages of perforated stretch ceilings
Tensile perforated structures are popular among consumers. This is mainly explained by its excellent decorative function. Such paintings have a certain artistic value due to their aesthetic appearance.
Among the key advantages of perforated canvases are:
- Environmental Safety. Stretch ceilings do not contain substances harmful to human health and the environment. It does not absorb odors and does not emit foreign odors.
- In case of minor damage, repairing the perforated sheet will not take much effort.
- Installation of perforated sheets is quick and easy. In addition, there is no dust or dirt during installation; the procedure takes place in the cleanest possible conditions.
- The perforated ceiling does not react to drafts due to the excellent ventilation system of the space between the sheets.
- The stretch fabric is resistant to high humidity and provides good air exchange. Thanks to this, the perforated ceiling can be installed in any room.
- The physical parameters of the tension fabric remain unchanged for a long period of time (10-15 years). With proper care of the canvas, it will not lose its brightness and pleasant appearance.
In addition to the positive aspects, stretch perforated fabrics have some disadvantages:
- Installation of carved fabric significantly reduces the height of the ceiling. Therefore, it is not advisable to use this design method in low rooms.
- Difficulties in care may arise. It is not easy to remove dust and other contaminants from perforated fabric; certain recommendations must be followed.
- Due to the presence of free space between the perforated sheets, the soundproofing characteristics of the room may suffer. Neighbors above will be heard more clearly.
- Perforated material does not tolerate high temperature loads. Due to heat resistance issues, care must be taken to keep it away from heating devices.
Most popular effects
- starry (night) sky;
- water movement;
- sunset (sunrise);
- dynamic lighting;
- sunlight peeking out from behind the clouds;
- Flora and fauna.
Of course, it is not possible to list all the options with perforated stretch ceilings - human imagination is truly limitless, and each new project can give the interior a completely new and unique effect, which can outshine all previous ones with its decorative potential. And conveying all the visual splendor with the help of printed characters is still a dubious undertaking. Therefore, it’s better to admire the photos of perforated stretch ceilings in modern interiors - and try to imagine which of the presented ideas could potentially be tested on your ceiling surface.
Features of a stretch ceiling with perforation
Perforated tension fabrics are multi-level structures in which the outer layer is riddled with holes (perforations). The shape and diameter of the holes can be very diverse. They can be placed randomly, or formed in certain patterns.
Thanks to the possibility of placing perforations at the consumer's request, it becomes possible to install lighting fixtures in any sequence. Often, perforated tension structures create a 3D effect, which is complemented by proper lighting and the play of highlights and shadows.
Perforation on the stretch ceiling is made with a special tool. It forms perfectly even holes that can be combined into a single geometric pattern. The film is stretched evenly and has a good margin of safety. Even several years after installation, the canvas does not sag and deformations do not appear.
How to make perforations on canvas
For the production of perforated panels, special modern equipment is used. The machine performs high precision cutting and operates on the plotter principle. To operate, computerized equipment is given a specific algorithm of actions.
Cutting is performed according to image templates embedded in the device. It is also possible to download new templates. But downloading a new operating algorithm is a rather expensive procedure, so many manufacturers use only the basic templates provided.
Types of suspended ceilings with perforation according to texture
Depending on the texture, perforated tension structures are divided into 3 main groups:
- Glossy stretch fabrics. They have a reflective effect and are therefore not recommended for installation in the sleeping area, kitchen and bathroom. In the first case, psychological discomfort is possible due to the mirror effect. When installed in the kitchen and bathroom, dull spots appear on the surface due to water evaporation. This is especially noticeable if you shoot a stretch carved ceiling on video.
- Matte perforated material. It is characterized by a perfectly flat surface with an anti-reflective effect. Due to the peculiarities of the texture, this option is suitable for any room, as it does not respond to temperature changes, high humidity and other factors.
- Satin perforated fabric. Made from vinyl film, it is an intermediate option between gloss and matte surface. The main feature is a perfectly flat surface, which makes satin the best option for installing decorative lighting.
Device Features
The perforated structure kit includes two shells (background level and perforated) and a supporting frame fixed to the walls around the perimeter of the room. The background tier is a smooth canvas of one or more colors. The decorative shell has carved perforations.
The design of the supporting frame consists of both one tier common to two canvases, and two rows of fastenings located parallel to each other.
Sometimes perforated systems are supplemented with other components. For example, decorative plugs designed to mask the gaps between the walls and the coating.
Photo of a perforated ceiling with a decorative cap around the perimeter
Types of lighting for perforated stretch ceilings
A perforated stretch ceiling can be made even more impressive by installing lighting systems. Various devices can be used as lighting devices, including lamps, chandeliers, LED and fluorescent lamps.
A carved suspended ceiling with lighting will help create a unique atmosphere in the room, give it aesthetics, and emphasize the interior design.
Often, lighting is mounted in the free space between the canvases. The installation of lighting largely depends on the originality of the project. With the right approach, you can get very interesting solutions:
- a chandelier located in the center will complement the perforated canvas and emphasize its pattern;
- if you install lamps behind the first layer, you will get contrast, which will make the design stand out;
- spotlights will highlight certain areas, which can add originality to the artistic canvas;
- if you place the lamps along the pattern of the perforated fabric, you can get a 3D effect, which will make the design more attractive and sophisticated;
- side lighting and color zoning will create unique artistic designs;
- a combination of fluorescent lamps and spotlights is guaranteed to help create a play of glare on a perforated stretch ceiling with lighting. This will be especially noticeable when taking photos and videos.
Important! To prevent lighting fixtures from contributing to heating of the tension fabric, it is necessary that their power be limited. For halogen and LED devices - no more than 35 W, incandescent lamps - 50 W.
All the benefits of using
- creating an original interior in any room;
- unlimited possibilities for combining perforations with photo printing;
- maximum use of the decorative potential of light reflections;
- various experiments with lighting;
- implementation of the convincing 3D effect already mentioned above;
- reliability and safety of the stretched fabric, as is the case with conventional film ceilings.
Color options for suspended ceilings with perforation
Manufacturers do not set any restrictions regarding color solutions in perforated structures. If necessary, the consumer can obtain a combination of any colors.
The only caveat is that the shade of the lower and outer layers of the perforated fabric must be different. Thanks to this, it is possible to obtain contrast, due to which the overall multi-level design will take on a complete look. As statistics show, in most cases, consumers prefer options where the outer layer with 3D perforations of a stretch ceiling has delicate pastel colors, and the lower one has a brighter design.
Colors of carved canvases
Perforated canvases provide an excellent opportunity to experiment with color and thereby create bright accents in the room.
- Beige.
- White.
- Black.
- Green.
- Red.
What interior design matches a carved stretch ceiling?
Thanks to the variety of variations of perforated canvases, they can become an integral element of any interior. Most often they are used to improve classic room designs, although you can find carved ceilings in high-tech style.
Among the main advantages of tension perforated material is the variety of colors, patterns and decorative designs. All this makes it possible to choose the ideal option, which will not only suit the overall interior of the room, but will also complement it, forcing you to play with new colors.
Flaws
- special requirements for ceiling heights - in low rooms projects using them are difficult to implement;
- rapid accumulation of dust on perforated surfaces;
- more complex and expensive installation;
- high consumption of materials.
Rules for installing a carved stretch ceiling
To simplify the installation procedure of a perforated stretch ceiling as much as possible, manufacturers have created a special molding with a 3D effect. Its presence allows you to simultaneously install two layers of artistic canvas. These baguettes are produced in three configurations:
- apply 0 – the perforated ceiling and the substrate have no gaps and are mounted closely;
- apply 8 – there is a free space of 8 mm between the sheets;
- apply 40 – the maximum distance between two canvases is 4 cm.
Since such devices are quite expensive, standard baguettes can be used as a basis. They must be installed one after the other at a certain distance (minimum 2.5 cm).
If you plan to install a perforated acoustic ceiling, the installation will have its own subtleties. For holes with a diameter of more than 1.3 mm, it is recommended to install a ventilation system and fire alarm under the film. If the user plans to obtain, in addition to a beautiful stretch ceiling, the maximum level of noise absorption, the acoustic sheet must be located at least 10 cm from the ceiling.
In general, standard installation of a perforated stretch ceiling is carried out in several stages:
- A supporting profile is attached along the entire perimeter of the surface. If a fabric ceiling is installed, the profile must have a clip system, PVC - a harpoon system.
- After installing the supporting structure, the material is carefully stretched and tucked into baguettes using special spatulas.
Important! When stretching vinyl, it is necessary to preheat the material and the room to 60°C. This is done using a special heat gun.
Special attention should be paid to the installation of electrical appliances. It is necessary to prepare a diagram in advance according to which places for lighting fixtures and channels for laying cables will be prepared. To understand all the features, you need to study the video with the installation of a carved stretch ceiling.
Ceiling lighting design
Using perforated ceilings, you can apply various lighting effects:
- Both bright and dim light passes through the holes in the canvas. This allows you to highlight zones of different functionality in the room. For example, the work area can be highlighted with bright light, and the place intended for rest and relaxation should be illuminated by dim light.
- When using multi-colored spotlights, you can create the effect of a starry sky, where miniature lighting fixtures will act as stars. Such designs are great for bedrooms, where they create a romantic and relaxing environment.
- Installing lamps behind a perforated sheet is a rather interesting option for lighting design of rooms. This design allows you to completely illuminate the surface of the ceiling and create original effects with light breaking through the holes of the carved canvas and falling on the walls, floor and interior items.
- Dark figures and dots on a multi-colored background are obtained when installing lamps on the outside of the perforated sheet.
- The perforated ceiling with combined lighting looks original. For this option, external and internal lighting are installed, they are turned on simultaneously or alternately.
Tips and recommendations for caring for perforated stretch ceilings
The carved stretch ceiling must be kept clean and tidy, otherwise it may lose its attractive appearance and accumulations of dirt and dust will begin to form on it. To keep the perforated ceiling clean, it must be washed at least once every 6 months.
Since the tension structure requires special care, during general cleaning it is recommended to adhere to the following rules:
- Use a vacuum cleaner to remove dust. In this case, under no circumstances should you press on the vinyl; cleaning the surface should be done as carefully as possible. This will prevent deformation of the perforated layer.
- It is strictly forbidden to use abrasive powders or aggressive chemicals to clean the ceiling.
- Do not scrape the tension fabric. This can cause it to become deformed and cracks will appear on the surface.
- It is better to remove dirt with a soft sponge soaked in warm water. As for acceptable detergents, it is better to use those chemicals recommended by the manufacturer. As an alternative, you can use regular glass washing liquid.
- It is prohibited to use organic chemicals when cleaning perforated stretch ceilings. They have a negative effect on the canvas, which is why the surface can be stretched and its basic color changed.
According to consumer reviews, a perforated stretch ceiling installed in the kitchen requires special care. It should be washed at least 1-2 times a week. This will help prevent the accumulation of dirt and the formation of a greasy film.
Important! It is not recommended to use hot water when cleaning a stretch perforated ceiling. Due to the high temperature it may melt.
Manufacturing technology
Equipment for suspended ceilings
Perforated ceilings are made from film or fabric sheets using special equipment that ensures high precision cutting of the material. The plotter involved in the production process performs specified algorithms of sequential actions.
The cutting of holes is done using a laser beam. At the same time, template options are already loaded into the equipment memory. If the customer is not satisfied with the sketch, another pattern is created based on the individual drawing using the software. However, such operations will be expensive in price, so for the most part, clients make their choice from what is in the manufacturer’s catalog.
Photos of suspended ceilings with perforation in the interior
Installation materials
To install holey ceilings, in contrast to solid structures, a special 3D profile is used, with which two panels are installed simultaneously.
Also, for installation you will need special equipment in the form of a heat gun, with which you heat the room and the coating.
Two canvases - background and decorative, fastening elements - self-tapping screws, decorative components - these are additional materials that are used during installation.
What is interesting about perforated ceiling trim?
It would seem that something new can be brought into the design of a room by holey stretch ceilings. It is quite difficult to surprise experienced and design-savvy owners of modern apartments, because the presence of holes or holes in the tension panel does not make it a work of art.
It turns out that not everything is so simple. It's not even about the presence of holes, but about how the picture of the perforated surface is formed. In essence, this is a way and an opportunity to organize a stretch ceiling pattern in a completely new way.
In short, the advantages of the new stretch ceiling design are as follows:
- It became possible to form compositions and even patterns from perforated holes;
- It is possible to use combinations of several types of vinyl materials;
- With the help of lighting, it is possible to emphasize the strengths of the design and camouflage weak and insufficiently expressed elements.
Most stylists and designers involved in apartment interiors claim that against the background of perforated ceilings, ordinary stretch decor looks boring. It’s as if comparing the government premises of a government institution and an art gallery.
You can try installing a simple option yourself
It is clear that it is impossible to build such a ceiling without professional knowledge and artistic perception of the picture, but it is quite possible to use ready-made designs, copy them and even bring your own ideas into the design.
Features of installation, recommendations of AstamGroup specialists
What do professionals advise you to pay attention to during installation?
- Choose from the options that are offered to you in the catalog. This will guarantee that the design will serve faithfully for a long time, because such solutions have already passed the installation test more than once.
- It is not recommended to use cutouts with internal corners, or those that do not have smooth outlines.
- All work on installing a carved canvas is no different from installing a regular canvas.
- Cutouts on the canvas should not be located too close to the edge (the optimal distance from the edges is 20-30 cm).
- Experts advise installing not in the usual way (to the opposite corner), but in a circle - this is how the installation of canvases with photo printing takes place.
- Direct heating of the perforation is unacceptable; only a slight temperature effect is necessary to get rid of creases that occurred during transportation. If uneven contact with hot air occurs, the perforation size may change.
- To achieve the desired effect, it is better to use a glossy canvas as the base tension layer, and also carefully consider the location of the lighting fixtures.
- If all rules for installing carved ceilings are strictly followed, the result will fully meet the customer’s expectations. But sometimes minor deviations in shape are possible (a circle can take on the shape of an oval, a square can take on the shape of a rectangle, etc.).
The installation of suspended ceilings with perforation occurs as follows.
- Decide on the type of location of lighting fixtures in the room (built-in or standard, which involves installing lamps under the canvas). This is important information that will be needed during the profiling process.
- The wiring elements, air conditioning and ventilation systems are fastened to the slabs, and wiring is carried out to the location of the lamps.
- Markings are made on the wall where the baguette (profile) will be placed.
- Horizontal lines are drawn along the mark along the entire perimeter of the room.
- The profiles are attached to the wall using dowels.
- The room is heated to a temperature of at least 40 degrees.
- First, install the base canvas in the profile, make holes on it for lighting fixtures, or attach an LED strip around the perimeter, if this is provided for in the design.
- Then the second level is installed - a perforated canvas. Then install lighting fixtures and a decorative cap around the perimeter of the room.
At AstamGroup it is easy to find the optimal solution for repairs - you can buy all the necessary materials from the manufacturer, as well as use the installation service. Now you won’t have any difficulty in ordering a stretch ceiling with perforation - if you still have questions, feel free to contact the company’s managers by phone or online.
Perforated stretch ceilings are panels made of aluminum or PVC film, in the bottom of which there are a large number of holes. They have other names - carved or perforated.
[custom_ads_shortcode1]