Decorative plaster in the kitchen - which plaster to choose for interior wall decoration in the kitchen interior in 2022

There are many ways to decorate walls: wallpaper, painting, panel construction. However, decorative plaster in the kitchen is a way to achieve a more durable and beautiful finish. A variety of colors and finishing techniques will allow you to incorporate it into different styles. And if you choose waterproof material, then excess humidity in the room will not be a problem.

Decorative plaster - what is it?

Decorative plaster is a special mass that allows you to create selected patterns and textures on the wall surface. These can be abstract patterns, traditional “sheep” patterns or trendy effects inspired by materials such as concrete, stone or wood.

Another way to achieve a stunning effect is to use structural or decorative acrylic paints.

What are the advantages of this plaster? Thanks to its thickness, it will help to visually compensate for any unevenness in the wall, so its surface does not have to be perfectly smooth.

• It can usually be applied to different types of substrates: brick, concrete, cement-lime plaster, as well as gypsum boards, gypsum bases and wood boards.
• Such a base requires the same preparation as before painting or laying wallpaper - the wall should be cleaned of old coatings and, if necessary, degreased. Deep cavities should be filled with putty or primer plaster and painted with primer paint to ensure a smooth surface.

Decorative plasters are a wide range of products that have one thing in common: they allow you to give walls a unique look. Its nature will depend not only on the type of product used, but also on the technique of its application.

Decorative plaster fits perfectly into modern or classic interiors, being an interesting solution in monochrome spaces.

Although it can cover all the walls in the interior, it is perfect as a contrasting accent for surfaces painted with traditional paint. We can give them different shades and use them on different types of surfaces.

Venetian

To get a beautiful coating, you need to purchase a transparent ready-made mixture and add one or more colors to it. To give the surface the necessary effects, the material is applied in layers, and protective wax or varnish is placed on top.

This plaster contains marble particles and lime. If necessary, you can get a marble or glossy surface. The applied composition dries quickly with the possibility of forming a mosaic-type relief. Among the qualities of such a durable coating are environmental friendliness, fire safety, resistance to wear and moisture.

Work on applying decorative plaster requires certain skills. The quality of the final result depends on a number of factors. Follow the step-by-step technology and the end result will definitely not disappoint you.

When applying, the following sequence of actions must be observed:

• Clean and level the walls;
• Select areas up to 1 m in size, and after drying, apply the first layer;
• For the first coating, continuous application technology is used, and all subsequent layers are applied in strokes. Movements should be small. By adjusting the degree of pressure, you can change the texture of the coating;
• Smooth the coating over the area. Repeat steps over the entire surface;
• Allow the plaster to dry;
• Polish and apply wax or varnish to protect. As a result, you can get a coating like the one in the photo of decorative plaster.

Using modern methods of finishing walls and facades, you can create a beautiful interior, distinguished by originality and comfort. Decorative plaster helps solve this problem in the most effective and visually attractive way.

Performance characteristics of decorative plaster

Decorative finishing material is a special composition that differs from those analogues used for simple leveling. Its peculiarity is that the product is used for the final stage of surface finishing. Particles of marble, sand, granite, and quartz are added to it. There are also antiseptic additives, which prevents the development of harmful microorganisms. At the same time, there is not a single dangerous or toxic substance here. In other words, the material is clean from an environmental point of view.

Decorative plaster provides the coating with sound insulation and fire resistance. The applied mixture also receives other qualities:

• ability to withstand temperature changes;
• resistance to moisture;
• absorption of kitchen odors is eliminated;
• walls can be easily cleaned with detergents;
• the surface is not afraid of exposure to grease, water, dust;
• resistance to mechanical damage;
• exposure to sunlight does not have a harmful effect;
• the decorative appearance is preserved for a long period of operation.

Type of decorative plaster in the kitchen
Decorative cladding is universal in nature due to the fact that it adheres well to any wall made of different materials:

• concrete;
• bricks;
• drywall;
• wood;
• metal

To plaster walls with this finish, it is not necessary to have specific knowledge and skills. The mixture itself is supplied to markets in convenient packaging containers. Irregularities on the walls are masked, becoming invisible. And after applying the decorative mixture, joints and seams will completely disappear.

Advice! Picturesque mixtures can make the kitchen come alive against the backdrop of imitation of different directions - from natural stone to delicate silk flakes.

Selection of plaster

Finishing the walls with decorative plaster gives the interior a unique and original touch. However, to obtain the desired effect, it is advisable to choose the right texture.

Mineral

Mineral - most often used in the kitchen and bathroom

It is based on cement and is sold in powder form. Endowed with excellent resistance to moisture, suitable for any surface. Can be used in the kitchen and bathroom.

Under the skin

An effective, but also complex technique that may not suit every interior. Therefore, you need advice from a qualified specialist. Only a master should apply the plaster, otherwise the desired result will not be achieved.

Silicone

Silicone - fits easily on any surface

This is a ready-to-use mixture and does not need to be diluted. fits well and easily on absolutely any surface, be it wallpaper under plaster, old uneven walls or brick. It has good moisture resistance, suitable for corridors, halls, bathrooms or kitchens. It can be used even on unprepared surfaces.

Mosaic

The appearance of single-color walls with small specks is mosaic decorative plaster. There are mixtures with different particle sizes and different colors. It is used to decorate walls both outside buildings, houses, and indoors. The surfaces are smooth and easy to clean. They are resistant to chips, scratches, and impacts from heavy objects. This plaster fits perfectly on almost any surface - concrete, brick, standard plaster, plasterboard panel material. Another plus is good ventilation.

Stone chips

Stone chips are a cladding method that also deserves attention

I believe that this method of cladding also deserves attention. Stone chips from fine to medium fraction (0.5-5 mm) in a special binder can work wonders. The manufacturer can use marble, granite or quartz as the base (stones). This coating can be stylishly finished:

• arched openings;
• corners;
• niches;
• architectural elements.

The clear, cold appearance of the coating in combination with another type looks simply gorgeous.

Velvet and silk walls reflecting particles of light flows look elegant and rich.

• Graphite is very often used by both designers and users. This type of plaster allows you to create the texture of aged walls or applications. The living room will also look good in certain areas.
• Africa is a widely known type of decorative plaster with a texture reminiscent of crocodile or snakeskin. It will look good and appropriate in an ethnic style living room. This finish looks expensive, especially if it is topped with a layer of glitter, varnish or wax.
• Rustic with the texture of shabby stone is used in the design of living rooms created in a country or historical style.
• Your living room will only benefit if you decorate the ceiling with patterns and combine walls with decorative plaster with areas covered with wallpaper for painting.
• You can artificially age walls using craquelure or bark beetle plaster. Cracks and abrasions are relevant in classic and retro styles.

Flock

Flocks are made from small plates (flocks). They have different shapes and colors. You can get gloss or matte. Some solutions may emit a glow. Therefore, they are used in interiors of different styles.

Art concrete

Art concrete is a modern finishing material for walls, ceilings and floors. The mixture contains dry cement and gypsum powder. Various additives, fillers, dyes, and varnishes are also added to them. Soft plasters allow you to create original imitations of a concrete surface. They are decorated with rivets, pipes (especially in the loft style), images of slabs, stacked blocks (ideal for high-tech or minimalism styles).

Bark beetle with imitation of ancient walls

Antique finishing is suitable for Provence, country, shabby chic, Mediterranean design, loft and classic.

The “bark beetle” coating resembles wood eaten by bark beetles. You can choose a composition with different contents. The different distribution of the mixture produces deep or weak grooves.

Silk

Plaster to which mother-of-pearl is added looks like silk-screen printing on the wall. Texture here is achieved by adding small grains of stone chips or cellulose fibers. Silk plaster has earned high marks for decorativeness due to the delicate tints of the finished coating. Glare appears depending on the viewing angle where natural or artificial light falls. Silk plaster is ideal for the living room, bedroom, library, study, any room where there is a lot of upholstered furniture.

Textured

This is a material with a very viscous structure. The composition includes various fillers, such as mica, wood, granite or marble chips. Can be used for both internal and external work. Concrete, brick and even wooden bases are subject to finishing.

Advantages:

• formation of a durable waterproof but breathable coating;
• the ability to imitate other materials, such as leather, stone or wood;
• selection of decorative plaster color by tinting;
• excellent heat and sound insulation properties;
• ease of application and affordable price.

To create the desired pattern, you need to prepare a roller with a spatula and arm yourself with a stencil.

Marble

Marbled plaster can be smooth or streaked. The color palette allows you to create a resemblance to natural stone.

Sea breeze

• wave effect;
• translucent type of coating.

To obtain the desired effect, fine-grained sand is added to the solution. The result is a convincing imitation of the sea surface on the wall. The photo shows several examples of the use of such plaster in a residential area.

Brickwork

The optimal solution, which costs significantly less than the brick blocks themselves. Fans of Provence, Scandinavian style, and loft will appreciate this material, which allows you to create an imitation of a brick wall

All these types of decorative plaster allow you to create a special atmosphere in the kitchen, which will have a beneficial effect on the cooking process. It all depends on the preferences of who will “reign” in this room.

Venetian in the kitchen interior

Venetian for finishing kitchen walls allows you to embody original design ideas. The special composition gives a beautiful coating with deep tone and reflections. Venetian plaster can be used in any style - classic, Provence, country, baroque, minimalism.

Venetian in a country style kitchen

Using Venetian plaster, you can zone the space into a working and dining area. To do this, combine contrasting colors, patterns, and textures. With the help of the Venetian you can create accents; it looks harmonious against beige tones. Too bright colors are not used for decoration. The purpose of the designed area is an apron, a wall near the dining table. For the work area, the coating must be resistant to moisture, temperature changes and easy to clean.

Space zoning

DIY decorative plaster in the kitchen

Not everyone can apply decorative plaster to a wall.
If you have a limited budget for kitchen renovations, you can decorate the walls with decorative plaster yourself. First you need to carefully prepare the base, remove old wallpaper or paint, and repair large cracks. The wall must be dry, level and clean.

The following stages of work:

1. After the putty has dried, apply an acrylic primer.
2. Allow the primer to dry and begin tinting, preparing and applying the plaster mixture. The applied decorative plaster is not painted; the pigment is added to the solution during mixing.
3. A stainless steel spatula, roller, trowel, and sponge help to give the coating the required relief.
4. After applying the plaster, the surface is covered with a special varnish, which forms an additional protective layer.

The work must be carried out by one person in order to maintain uniformity of texture throughout the entire wall.

Not every finishing material is suitable for decorating kitchen walls. Decorative plaster is one of the options that can cope with high humidity, temperature changes and various contaminants. The main thing is to choose the right composition and follow the application technology.

Plastering work with mortar

Let's move on to the solution. The solution is better mixed in a round container. If you are plastering for the first time, then start by using a 20-25 liter bucket. When you understand and grasp the essence of the work, and the speed of work increases, you can switch to a 30-40 liter tub.

Mix the solution according to the instructions on the package. The mixture is added to the water rather than recycled. No water is added to the prepared solution that is already being worked with.

The mixed solution must stand for 3-4 minutes for all chemical reactions of the mixture with water to begin.

Laying mortar on the wall

The solution is applied to the wall between the beacons. This is done as follows. Take a spatula or trowel in your working hand with a reverse grip (like the handle of a pistol). Next, scoop up the solution and forcefully throw it onto the wall. Do not skimp on the mortar; the slaps of the mortar should lie one next to the other with a slight overlap. The thickness of the layer should be higher than the installed beacons. This layer of putty is called a tent.

Plastering the kitchen with your own hands: the first outline

Apply the solution to 1 meter of the wall. Let's take a rule. We unfold it with the straight part up, not with a bevel, but with a straight part. We take the rule with both hands and from the bottom (from the floor itself) up, stretch the rule along the beacons. The beacons are firmly fixed in the solution. Therefore, you can put pressure on the rule.

Related article: Painting kitchen walls: how to paint a kitchen correctly

DIY kitchen plastering: plastering rule

The rule is to remove a lot of excess solution. This is good. The solution removed according to the rule is dumped back into the bucket.

From the first pass, as a rule, you will not get a smooth plaster surface. In places where there are gaps and holes in the plaster layer, you can make a second cast and immediately level it using the rule. You can apply the solution to the edge of the rule and, holding it at an angle of 30⁰ to the wall surface, stretch the rule along the beacons. The layer will come off the rule and level the plaster layer. Don’t be lazy, that meter of mortar that you applied to the wall will turn into 1.4-1.50 meters, because the excess mortar will be pulled upward.

Without stopping, plaster the wall between the beacons from floor to ceiling.

Any wall must be plastered completely without lunches, only with breaks for mixing the mortar.

It is important to plaster the corners of the room when the walls converging in the corner are already dry. In this case, the plastered wall itself will become a beacon.

Note

It is necessary to distinguish between drying plaster and drying plaster. If you press your finger on the plaster layer and it no longer leaves dents, but you can easily cut the plaster layer with a knife, this is drying out of the plaster. The plaster will dry the next day.

After the solution has dried, you need to remove the beacons from the plaster layer. The furrows from the beacons are sealed with the same solution with the pulling rule.

Features of the material

There are several reasons why it is beneficial to use this material in any room, including the bathroom and balcony.

• Additional sound insulation. Of course, you can’t completely remove the noise, but you will create an additional barrier.
• Resistance to moisture and temperature changes.
• Leveling unevenness on the wall.
• Long service life.
• Decorative. Using simple tools you can create a variety of effects, even imitation stone.
• Possibility of wet cleaning.
• It does not absorb odors.
• And breathable.

The application of interior finishing can be carried out without problems on almost any surface. The material fits well on concrete, drywall, brick, wood, stone.

How to apply decorative plaster

Clean the base from any decorative coatings, paint, or anything that may peel off. Get rid of greasy and dirty stains, construction dust and small fibers. Use regular putty and sealant to patch cracks, potholes and other defects, and dry.

Be sure to apply a primer that matches your type of plaster. It improves the adhesion of the finish to the wall so that in the future the plaster does not fall off in pieces. Use primers with beneficial additives, such as fungicides or antiseptics.

If you have a thin-layer and finely dispersed mixture, it is better to apply a leveling layer first. This is a traditional starting putty with a coarse filler like sand. Vary the number of layers depending on the situation, but be sure to dry everything and coat it with primer again.

Decorative plaster is applied with a spatula using wide strokes, directly or in an arc. You can create texture with a trowel by pressing it against the wet mortar and sharply pulling it back. It’s even easier to take a roller that already has the desired design applied to it. To give relief, various available materials are suitable - sponge, film, fabric, brushes, everything is used.

The best photos of real examples

In order to choose the most beautiful plastering, look at examples of real photos in the interior:

What types of decorative plaster can be used in the kitchen?

Depending on the composition, decorative plasters may have certain performance characteristics and appearance. The mixtures are based on mineral or synthetic material. And as additives to impart surface relief, stone chips, cellulose fibers or polymer granules are used.

Decorative coatings are also distinguished by the method of application. Venetian, textured and structural plaster is used in the kitchen.

Structural

The composition includes granules and fibers of various sizes. They form an uneven layer.

• Lamb, fur coat. The surface is uniform, granular or in the form of villi.
• Terrasite. Imitation of rocks.

You can create more complex patterns with rollers or spatulas, sponges and other tools.

Sometimes straight grinders are used to create patterns.

Craquelure

Products that create an unusual effect of a cracked, aged surface. Suitable for any substrate: concrete, brick, wood, drywall. First, the wall is painted with acrylic paint - this is what will be visible from under the cracks. To achieve a better decorative effect, it is distributed with multidirectional strokes. Apply the mixture over the paint and leave for 3-4 hours. In some cases, it is immediately warmed up with a hairdryer.

Cement

They have high strength characteristics. Supplied in the form of a dry mixture, which is prepared before application. Can be applied to mineral substrates. Due to its high performance characteristics, it can be used to decorate a bathroom.

Cement compositions are prepared before use

Preparing kitchen walls for applying plaster mixture

1. Before starting plastering work, if possible, remove things and furniture from the kitchen, and then clean the walls of the previous finishing materials.

2. Inspect the wall surfaces and fill the cracks and potholes found on them with putty.

Advice. Take the time to check the evenness of the walls with a plumb line and a spirit level. If the wall surface deviates significantly from the vertical or has obvious depressions and distortions, it will need to be completely plastered before decorative finishing.

3. Prepared for further work, treat the cleaned and leveled walls with acrylic water-dispersion primer and let it dry.

While the soil dries, prepare for work:

• trowel;
• drill mixer;
• a couple of large plastic buckets;
• set of spatulas;
• several foam sponges;
• tray or basin;
• grater and smoother;
• special textured roller or plaster stencil.

Adding texture to plaster using a brush

Consumption

Despite the fact that processing textured plaster surfaces causes certain difficulties, such a coating has no equal in beauty. The amount of material depends on the thickness of the layer, as well as on the size of the fraction. For convenience, everything is summarized in the table below.

Important! Any type of decorative finishing requires pre-treatment of surfaces with a specific primer. The choice of a specific composition is influenced by the type of plaster.

Textured pattern on the wall

Crafting Recipes

Now let's talk about how to prepare the mixture and what you need for it. When mixing decorative plaster at home, you can safely use a variety of materials and additives, which opens up a lot of opportunities for experimentation. All the necessary ingredients that will be required during the work are available at a hardware or hardware store.

With PVA glue

This is one of the most common recipes. To prepare you need:

• take a deep container with a volume of about 10 liters, rinse it thoroughly and dry it,
• pour 6 kg of putty into it,
• add 2 liters of water,
• knead the mass
• pour in 0.2 liters of ordinary PVA glue.

The resulting solution should be carefully mixed until a homogeneous mass is obtained. Alternatively, PVA glue can be replaced with a grout mixture intended for drywall in proportions of 1:1.

With primer

This cooking recipe is no less simple and in many ways resembles the scheme described above, but there is one important nuance that should be taken into account. The solution is also prepared from 6 kg of dry mixture, which is mixed with a primer. It must be added until the consistency of the solution resembles homogeneous sour cream.

To make the resulting mass better quality, it is recommended to add a small amount of grout mixture intended for seams. When preparing the solution, you should use a standard white primer.

Mixing dry putty mixture on a primer

Gypsum based

Gypsum powder compositions are also excellent for preparing decorative plaster at home. To do this you will need:

• mix 6 kg of gypsum mixture with 2 liters of water (the liquid must be strictly at room temperature),
• knead the solution until smooth,
• add 0.2 liters of PVA (in this case it acts as an additional adhesive that ensures good adhesion of the components).

The resulting solution has a pleasant consistency. It fits perfectly on walls and opens up great opportunities for layer-by-layer surface decoration. If desired, color can be added to obtain a mixture of a specific color.

With marble chips

This is a very interesting recipe that is popular in professional circles. This mixture is indispensable in cases where you need to make decorative plaster of the “bark beetle” type.

One part of the crumb is mixed with 4 parts of finishing putty. After this, water is added until the mass becomes homogeneous and sufficiently viscous, as in the cases above. After drying, you can add the desired dye.

Venetian

One of the favorite options, however, the preparation of this solution is associated with additional difficulties. You need to buy a mixture containing fine-grained crumbs:

• malachite,
• marble,
• quartz.

When preparing the mass, slaked lime and colors of the desired shade are added. The solution must be mixed until it becomes a thick paste (it should not be too liquid).

Versailles

To prepare this mixture, you will need the following components:

• powdery finishing and starting putty,
• acrylic paint,
• aluminum powder.

Dry mixtures are mixed in a 1:1 ratio. You need to pour water into them and stir thoroughly, then leave for a while.

After waiting about 5 minutes, mix the mixture again, then add color, if necessary, and aluminum powder (will give the finished coating a special luxury).

Choice of color and pattern

As you can see, decorative plaster can be very diverse. What about the palette? We invite you to look at our photo selection of various colors of decorative plaster - we are sure you will find a suitable option.

A wide palette allows you to choose almost any shade.

One of the most popular shades of kitchen decorative plaster is white. If you use a covering in the form of brickwork, it is ideal for a Scandinavian-style interior.

Beige coating is no less loved by designers. For example, such an apron made of Venetian plaster. It can be an excellent stylistic accent for a kitchen in the style of modern classics.

Textured black decorative plaster is ideal for minimalist or loft style interiors. Choose coatings that are not too embossed, but expressive - this way the color will reveal itself deeper.

Bright green decorative plaster in a modern-style kitchen looks very fresh and unusual. It is not necessary to decorate the entire wall with it: one bright element is enough to highlight, for example, the dining area.

Purple, lilac, pink tones of decorative plaster are ideal for spacious rooms. They help make the interior softer and more delicate.

Gray and concrete tones are suitable not only for lofts - such decorative plaster can serve as an excellent frame for modern and modern style.

Blue and turquoise shades are excellent for Provence, Mediterranean, and country styles. The main thing here is to find the right tone so that it harmonizes with the rest of the kitchen frame.

But bright colors, for example, yellow or red decorative plaster, can be matched to any type of interior. Use the basic rules of color selection.

Using decorative plaster with a pattern, you can create entire design compositions in the kitchen, for example, imitation of wall stucco or frescoes. Here we recommend turning to professional designers - it is quite difficult to do such work on your own.

Varieties of design according to application techniques

In addition to the composition, the resulting appearance is important. To understand which mixture is best to choose for the kitchen, let's look at the photos and types of application.

Smooth

You can make a smooth coating yourself. It will not look boring due to the wide color variety. To make it unusual, you can add mother-of-pearl and sparkles.

Flock

If you need decorative plaster on the walls, which can add coziness to the room. Flock mixtures will help with this, allowing you to create on the walls the softness characteristic of fabric. They are used when decorating a children's room or bedroom.

A distinctive feature of such compositions is the presence of flakes painted in different colors. The application technology used ensures alternation of different color areas without joints. You can create such a coating with your own hands.

Graphito

Graphite - contains sand (sand concrete)

Thin-layer concrete containing sand (sand concrete). It can be used to create wood coverings, porcelain stoneware, leather, decorative stone and fabric. It is also used to create volumetric or floral motifs. Even monumental images can be recreated from it. The material is very good for decorating walls in the medieval style.

Decorative structural paint

This can be an acrylic-based paint, which allows you to achieve a certain structure, or a paint with a high content of quartz particles, which forms a grainy layer on the surface of the wall.

• The method of using paint varies depending on the specific product - some are ready-to-use, others need to be colored with pigment.
• This paint has a less dense consistency than mineral plaster, so it is relatively easy to model with a brush or other tools.

Latex plastic

• high-quality imitation of glossy stone;
• Various colors can be added

Often in the interior, such a texture looks organically with finishing stone or corresponding wall decor. You can choose any color, but when preparing the solution you should be careful and do not stir it completely - this way you will get a more natural appearance.

Paintings and frescoes

This artistic design adds a special flavor to the room, allows you to dilute the interior and add your own individuality and some zest to it.

Stucco for a perfectly smooth surface

Stucco is one of the most popular options for decorative plaster that can be used in home interiors.

Stucco can be freely painted in any color to give it the desired character, and its surface can be further treated, for example, with wax. This will give it a mirror effect and make it more resistant to the external environment.

Synthetic stucco, developed on a resin basis, not only perfectly imitates marble, but is also waterproof, so it can be successfully used in the kitchen or bathroom. Using this type of product allows you to achieve an extremely elegant wall finish.

Antique

Despite the rough, slightly shabby appearance, which is created using a special technique for applying patina, such decorative finishing in the interior looks very dignified, allows you to recreate the atmosphere of the past and give completeness and completeness to certain style directions.

Africa

Africa looks quite expensive

Covering imitating snake or crocodile skin. Possessing a special decorative effect, it is often used in interior decoration, emphasizing the ethnic flavor. It looks quite expensive. The top is covered with glitter, paint or wax.

World map (islands)

A geographical image with clearly marked continents, islands and other characteristic relief will be a wonderful decoration for almost any room.

Selecting the palette and textures

Decorative plaster for interior wall decoration is selected depending on the volume of the room. The larger it is, the more texture and relief is allowed. There will be no difficulties in choosing the right color, because there are approximately 2000 shades of colors. The colors can be selected from a catalog or in a store with a consultant to match the tone of the set, dining table, chairs, curtains, etc.

The mixture is produced in two consistencies: powder and paste. The dry powder is diluted in water to the required consistency immediately before puttying. Once the mixture has hardened, it cannot be diluted, so do not dilute it too much. Ready-made pastes are sold in sealed containers, so they are not afraid of rapid hardening. But after opening, if stored improperly, the solution may harden, so it is better to use it immediately without any residue.

The most popular color for kitchen decoration is snow-white. It is used in many styles. With it you can get brickwork suitable for the Scandinavian style.

Beige is also often used for decoration. Venetian plastering can be used to create a classic or neoclassical kitchen apron.

For bright new styles, a green tone is suitable. It is not necessary to plaster the entire area with it. It is enough to focus, for example, on the dining area.

Violet, pink and lilac colors can create a more relaxed and gentle atmosphere in spacious rooms.

Charcoal decorative plaster for the kitchen is used for high-tech, minimalism, loft. Moreover, the walls should be smooth or with slight relief.

Grayish shades are used for minimalism, high-tech, modern and loft.

Blue and turquoise tones are suitable for Provence, country, and Mediterranean style. They go well with white shades and small floral prints.

The rest of the bright colors are carefully selected so that the furniture and decor look harmonious.

The stucco molding and frescoes look very stylish. But it is very difficult to obtain them on your own. That's why it is prescribed to masters.

Advantages and disadvantages of plaster for the kitchen

Like any finishing material, decorative plaster has its strengths and weaknesses.

One of the main advantages of plaster is strength and durability. Plaster tolerates mechanical stress well and retains its original appearance for many years. This is also facilitated by the fact that the coating has no seams, which means it not only looks better, but also does not wear out at the joints.

Plaster is an environmentally friendly material, so you don’t have to worry that it will emit substances harmful to health.

The kitchen is a specific room, which is characterized by changes in humidity and temperature, and decorative plaster perfectly resists these influences.

Another undoubted advantage is that the material does not absorb odors, is easy to clean, and is not afraid of the use of detergents.

Decorative plaster has excellent fire performance because it does not burn, and is also an excellent sound insulator.

And finally, plaster has amazing aesthetic qualities: a huge selection of modern types of material allows you to bring to life the most daring design solutions, thanks to which the final result can differ in texture, color, and application options, making your kitchen unique.

Using decorative plaster, you can imitate a variety of materials, such as wood or leather.

Plaster has, perhaps, only one drawback - not everyone can do this type of work on their own, which leads to additional repair costs.

In addition, if you quickly get bored with your decor and have a tendency to constantly change something in the design of your apartment, then decorative plaster is not for you, because it will last a very long time. It’s better to glue moisture-resistant wallpaper - after a while you can easily replace it.

You should not immediately plaster the walls, and if the apartment is in a new building, it is better to wait a while so that as a result of shrinkage of the house, cracks do not appear on the walls.

Decorative plaster is an extremely versatile option in any kitchen. A wide variety of tulle options for the kitchen and the most exotic options for lambrequins will go perfectly with it.

Design options for kitchen aprons

In the kitchen, to visually enlarge the room, it is recommended to introduce tiles or arrange a mosaic apron. In spacious kitchens, you can experiment with square, large-format porcelain tiles or quartz vinyl laminate.

• Large rectangular tiles are rarely used to create a backsplash; it is believed that the installation will forgive the kitchen and does not give the desired aesthetic effect.
• But it can visually increase the space.
• Mirror, glass, glossy and mother-of-pearl surfaces have the ability to reflect and enhance light.
• In this case, it is worth equipping the lower part of the wall cabinets with lighting.

Most often, kitchen backsplashes are made from tiles, because ceramic tiles can protect them from detergents, heat, water, grease and steam. Less commonly used are Venetian plaster, quartz vinyl laminate or porcelain stoneware.

Is it possible to wash decorative plaster in the kitchen?

Thanks to its special composition, this material is resistant to moisture and maintenance can be carried out by washing the walls if you wish. It is permissible to use detergents for severe contamination.

In general, it is recommended to use a durable coating in high-traffic areas so that there are no difficulties during cleaning in the future.

Some materials of cheap samples can chafe during wet and rough cleaning, so before you begin, carry out a test experiment on an invisible part with a light-colored cloth.

Manufacturers offer a wide selection of different material options, from simple to exclusive looks, and the fashion for this material has finally established itself.

Tips for beginners

If you decide to plaster the walls yourself with textured mixtures, I suggest you listen to the advice of professionals:

If you do not have experience working with this material, choose simple types of plaster; you can apply relief designs using stencil rollers. They can be bought at any construction market.

Unusual living room design in purple

• In plaster bark beetles, use special granules in your work. Move them in the desired direction with spatulas.
• To create bas-reliefs, stucco moldings, and three-dimensional decorative figures, use gypsum compositions, provided that you can do this. Otherwise, you can buy ready-made ones. There are plenty of them in hardware stores too.
• If up to this point you have no experience and have never worked with decorative plaster, try your strengths and capabilities on an inconspicuous section of the wall of a balcony, loggia or toilet.

In dark, neutral colors

Consider the features of your walls. Textured plaster fits well and without problems on surfaces made of brick or concrete without prior preparation.

• Consider the climate conditions of the room. For example, you can buy any type of covering for the living room, corridor or bedroom. And in the bathroom or kitchen, where the climatic conditions are unstable, pay attention to silicate mixtures. By the way, they can be periodically updated and repainted.
• When choosing colors in your bedroom, consider the space. If it is located in the north, use coffee shades, beige, orange, burgundy or pink. If it is sunny, then it is preferable to use cold colors: green, gray, blue.

Flaws

Despite the impressive list of advantages of decorative plaster, the material is not without some negative features. Upon closer analysis, some of them may play a major role in the preference for other finishing materials. The most significant disadvantages should be noted:

• Preliminary surface preparation. Although it is believed that plaster is capable of leveling uneven walls, in fact it only compensates for minor cracks, chips and differences in plane of no more than 10 mm. For larger deviations, alignment will be required.
• The wall must be primed before application.
• Dismantling will take a lot of time and effort.
• It is impossible to apply some types of coatings yourself without experience.

How and where you can apply decorative plasterSource folksland.net

Despite the listed pitfalls, decorative plaster remains one of the highly sought after finishing materials.