Buyers choose it for many reasons, including high abrasion resistance, due to which, after the surface has dried, you can always carry out wet cleaning.
What is "Bayramix"
Bayramix is a unique solution for facade and interior finishing from a Turkish manufacturer. For 24 years, decorative and finishing materials from the Interra Deco Group holding have been in great demand among craftsmen. IDG is committed to preserving the environment and uses high-quality hypoallergenic raw materials to produce its products.
Under the Bayramix brand, complex materials are produced for preparatory and finishing work on external and internal surfaces of walls and ceilings, namely:
- water-based facade and interior paints;
- liquid wallpaper;
- protective coatings, primers and impregnations;
- putties for sealing seams and leveling bases;
- textured and structural coatings;
- decorative plasters.
Conclusion
Bayramix brand decorative plaster will help in decorating almost any interior. It will ensure a long service life and durability of the coating. Using the photos used in the article, you can choose a design for your home. We also recommend watching the following video to see how Bayramix is applied in practice and to ensure the quality of the material:
Recommended Posts
Decorative plaster Decorazza
Derufa – decorative plaster
Venetian decorative plaster
Decorative plaster Terraco
Decorative plaster: stone
Decorative plaster Ceresit
Bayramix plasters
Bayramix finishing plaster mixtures are divided into several types.
- Marble. The base is an environmentally friendly polymer – acrylic resin. The key component is marble chips of various shapes, colors and sizes. Special weather-resistant, durable Bayramix plaster compositions have been developed for exterior work, as well as interior decoration.
- Venetian. Ideally reproduce the texture of natural stone: raw sandstone and limestone, the smooth surface of marble and granite, the unique effect of malachite and jasper. To achieve texture, it is recommended to apply the finished composition in 2 layers. Requires the application of a finishing coating - glaze paint.
- Textured. Decorative plaster mixture with a pebble effect. Performs several functions simultaneously - finishing and leveling bases, filling minor depressions and cracks.
Suitable bases for plastering with a polymer composition: concrete, expanded clay concrete, gypsum, asbestos cement, gypsum plasterboard, gypsum board, wood chips, wood fiber, oriented strands of fine and medium fractions, whitewashed, and also painted with oil paint.
Line of marble plasters
- Large marble chips with a mosaic effect. The coating includes large, unpolished marble granules in the color of natural stone. In total, the manufacturer offers 12 shades.
- Ball-shaped marble chips with a mosaic effect. Sanded granular grains of fine texture lie perfectly evenly on the surface of walls and ceilings. The catalog contains 24 color variations.
- Mineral with mosaic effect. The spherical granules are painted with an abrasion-resistant composition. It won’t be difficult to choose a material that perfectly matches the color – the range includes 56 shades.
- Savtash. Marble filler in the form of polished round granules. There are 36 possible “natural” colors to choose from.
- Luxory. Elite plaster mixture with marble chips, painted with metallized pigment. When dry, the plaster applied to the base has a distinctive luster with a lurex effect. The color palette includes 14 different shades.
- Mineral-Gold. Marble chips are coated with a light-resistant pearlescent dye that protects the coating from fading. Bayramix plaster is intended for interior work. The manufacturer limited the choice to a palette of 20 shades.
- I Stone. Textured plaster mixture with imitation of the color and rough surface of clastic rock - sandstone.
Line of textured plasters
- Gravol. When applied to a base, it resembles the “Fur Fur Coat” texture and is intended for tinting according to catalogs.
- Palta. The composition includes granite chips of different sizes. Suitable for computer tinting according to the tinting tables of the material.
- Bitera. The main component is large-sized marble granules to create the “Bark Beetle” texture.
- Teratex. Large format "Fur Fur".
- Teraflex. Plastic filler with special additives to create a thin-layer relief.
- Rulomix. Thin-layer coating with a “Fur Coat” structure.
- Rulosil. Moisture-resistant “Fur Fur” for exterior finishing with fine granules.
Varieties
Bayramiks plaster has quite a few varieties. Let's look at the main ones:
- Bayramiks Savtash. It is made from mineral components and when processed creates a mosaic effect. This solution is most popular due to its good price-quality ratio. Often used to decorate the facade and create the interior of a building;
- Bayramix gold. When processed, the effect of gold plating is created. It is of high quality and will ensure a long service life. The price is a little higher;
- Bayramix Luxori. It has a large selection of colors and fraction thicknesses. When facing, a decorative mosaic effect is created. Made from mineral components with the addition of quartz or marble;
- Bayramix solar. It is created on the basis of water dispersion and acrylic additives. During processing, a mother-of-pearl effect is created; you choose the color of the coating yourself.
As you can see, the variety of choices is quite large. Keep in mind that the consumption of different types will vary significantly. Consumption depends on the number of layers applied, the type of fraction and the chosen processing method.
Advantages of Bayramix plaster
A unique set of characteristics of decorative and finishing products sets Bayramix apart from its analogues:
- Environmental friendliness;
- Frost resistance;
- Strength;
- Abrasion resistance;
- Long service life;
- Wear resistance;
- Protection of the base from destruction;
- Weather resistance;
- Fade resistant;
- Ease of operation and subsequent operation;
- Wet cleaning is allowed, including using detergents.
Scope of use
There is a fairly wide range of Bayramix plasters on the modern market. Product types differ in composition and characteristics.
The materials are suitable for both internal and external finishing work. This plaster is applied to parapets, fences and other surfaces.
Bayramix plaster compositions are suitable for a wide variety of substrates:
- surfaces painted with acrylic and water-based paints;
- walls made of cellular or lightweight concrete;
- plasterboard surfaces;
- wood panels, chipboard, plywood, fiberboard;
- reinforced concrete panels.
Wall finishing stages
Unlike Venetian decor, texture and structural compositions have fewer requirements. Regardless of the chosen finishing material, before applying Bayromix plaster, it is necessary to carry out a full-stage preparation of the walls.
- For interior and exterior decoration - remove all switches and sockets from the work surface, remove lamps and decorative elements.
- Clean the surface of the old coating, degrease, level the base and fill any cracks that have formed.
- Prime the working area for better adhesion of the putty to the base.
- Apply a thin layer of finishing putty.
- Prime with a special acrylic compound.
- Sand with fine-grit sandpaper.
You can begin finishing the walls a day after the preparatory stages.
Note. The use of putty before applying thick-layer relief coatings is optional.
Where can I buy
You can always buy Bayramix decorative plaster in Moscow, St. Petersburg, Kazan, Novosibirsk and other cities of the Russian Federation in popular online stores. You most likely will not find prices on the official website - these products are sold through a dealer network. The prices are recommended by the manufacturer himself, and dealers adhere to them.
Conclusion
If you are not satisfied with wallpaper or ceramic tiles, natural stone or ventilated facades, Bayramix decorative plaster is quite capable of becoming a worthy alternative. The products manufactured by the company attract buyers with balanced characteristics and reasonable prices. However, it must be used thoughtfully, without trying to save money on the preparatory stages. Otherwise, the parameters and beautiful appearance declared by the manufacturer will remain only on demonstration stands and the pages of the official website.
Application technique
- Preparing the mixture. Stir the prepared paste thoroughly before use. Dry - mix with water in the proportion specified in the instructions. For mixing, use a drill with a construction mixer in the form of an attachment.
- Application. Decorative plasters are applied to the base that is completely dry after the primer layer. Work is carried out without beacon profiles, even when applying thick-layer facade coatings. Marble plaster is applied in 1 layer with a thickness of 1.5-2 granules and leveled with a trowel or a construction trowel. Venetian plaster is applied in 1-2 layers. The first is to distribute the solution evenly over the working surface, creating a relief texture using a textured roller, trowel, applicator or tampon. Textured plaster is spread over the surface with a spatula or spray gun. Uniform spreading of the solution followed by imparting the required relief is done with a trowel, mesh roller or brush.
- Coating care. Wet care using detergents is allowed. The final step is to rinse the surface with a sponge soaked in water.
Advantages and disadvantages
There is no doubt that Bayramix marble decorative plaster has honestly earned its popularity. She:
- Resistant to mechanical damage and moisture.
- It is environmentally safe because it does not contain substances harmful to health.
- Aesthetically perfect, and can be combined with various design styles.
- Relatively affordable (compared to analogues).
However, only experienced specialists who comply with the requirements specified by the manufacturer should be involved in work using this finishing material. The treated surfaces must be carefully prepared, and even a seemingly insignificant violation of the technological process can cause a deterioration in the appearance of the coating or an increase in solution consumption. Some consumers regard this as a disadvantage. As a result, despite the predominance of positive reviews, Bayramix products are not included in every rating of decorative plasters.
How not to apply Bayramix
Neglecting the application technology developed by the manufacturer entails the following consequences:
- Failure to follow the technique for applying Bayramix marble plaster leads to the formation of seams on the dried surface and gaps due to the uneven distribution of the mixture on the base.
- Failure to comply with the recommended temperature and humidity for plastering walls with Bayramix can lead to peeling of the mixture. A low temperature will not allow the material to set; too high a temperature will lead to the formation of cracks even with the use of reinforced reinforcing mesh.
- Before plastering work, it is necessary to treat the surfaces with primer. This will prevent the plaster from taking moisture from the base when drying. Otherwise, cracks will form on the coating.
- Depending on the Bayramix paste plaster mixture used, the applied coating requires wetting once a day, especially in hot weather.
- If work is planned on the facade, it is recommended to avoid direct sunlight. To protect the coating, 3 hours after applying the plaster, cover the surface with plastic film. This will not allow moisture to evaporate, which will protect the base from cracking.
- Incorrect mixture calculation. Each paste for plastering walls has an individual consumption. It is recommended to add from 5% to 10% to the calculated area and buy the entire volume at once. It is not recommended to split the purchase into several parts due to the fact that the seller may not have the finishing material or the appropriate colorant.
- Failure to comply with the proportions of water to dilute the dry mixture. A solution that is too thick will not adhere well to the base; an overly diluted solution will not meet the stated characteristics of the prepared product.
- You can’t add dry mixture to the water – then it’s difficult to get rid of lumps.
Master's recommendations
If stains appear on the base, it means that the distribution of the composition was uneven. This error can be removed by applying a new layer. But you can only work with a dried layer.
If yellow spots are found, the drying process has been disrupted. It is important to properly prepare the foundation in advance.
You can only work with a dried layer.
