- home
- Painting work
- Painting chimneys
Professional painting of chimneys by climbers at altitude. Painting the chimney of a boiler room, buildings and private houses, factories, plants, industrial enterprises. We paint metal and brick pipes. Coloring at low prices.
– –
Climbers painting chimneys
Painting chimneys is a technically labor-intensive process, as it involves working using industrial climbing techniques. Often, industrial chimneys are several tens of meters high, and painting the pipe along its entire length requires professional industrial climbers with experience in painting and painting work.
Painting work at height is a big risk, especially. If chimneys are painted, smooth, vertical surfaces are sufficient. Maintaining safety in this case is a matter of vital importance, and only real professionals will be able to carry out the work, ensuring maximum safety at the site, completing the painting with high quality and on time.
offers painting services for chimneys of any height.
We offer:
- painting of industrial chimneys;
- painting boiler room chimneys;
- painting chimneys of residential buildings and multi-storey buildings;
- high-quality application of paint and varnish coating on metal, reinforced concrete, brick pipes.
Marking painting of chimneys
Signaling or marking painting of the chimney is a mandatory procedure for all tall chimneys. Such painting is regulated by relevant safety requirements and legal provisions.
Marking painting is the application of alternating red and white stripes of paint and is carried out in the following order:
If the pipe is no more than 30 m, then marking painting can be omitted if there are nearby higher objects with signal painting applied to them.
If the pipe is more than 100 m high, then signal painting is carried out along its entire length.
If the height is less than 100 m, then painting only the upper part of the pipe is allowed.
The smokestack markings must be bright to attract the attention of pilots from the air.
Why is it necessary to paint pipes?
Boiler rooms are equipped with the most efficient furnace equipment, which requires high chimneys for good draft. Painting metal structures is necessary at a minimum to protect them from corrosion - this is clear to everyone. But how to explain why to paint brick pipes?
The fact is that brick is a porous material. It accumulates sedimentary and atmospheric moisture, which turns into ice when frozen. And ice of aqueous origin occupies a larger volume than liquid water, as a result of which it breaks bricks and masonry mortar. Unprotected structures very quickly become dilapidated, in proportion to the number of freeze-thaw cycles, and they have to be carefully dismantled before they fall from a height onto the area adjacent to the facility. The same applies to monolithic and prefabricated reinforced concrete pipes. Therefore, technically, you can save on painting, but only if the boiler room operates without stopping during frost: at facilities that have stopped their work, pipes fall into disrepair within ten years.
Painting of chimneys of boiler houses and industrial facilities has a different color scheme. In some cases it is a monochromatic color, in others it is a marking, consisting of alternating contrasting stripes (for example, red and white).
The latter is applied for the safety of air transport to any pipes that:
- They have a height of more than 50 meters. Partial painting of pipes (namely the upper third) up to 100 meters high is allowed. Higher pipes must be painted completely;
- They are located within a radius of 4 km from the borders of the airport (airfield).
In most cases, the pipes will have to be painted anyway - these are the regulatory requirements, and it is worth choosing the marking scheme, choosing white and red (optionally orange) paint. From an aesthetic point of view, this option is more profitable, because has a dismembering effect.
Prices for painting chimneys
The cost of painting a chimney depends on the following factors:
- heights;
- diameter;
- pipe condition;
- the need for marking painting;
- deadlines for completing the work.
The table below shows the prices for painting chimneys made of various materials.
| № | Name of works | Unit change | Price, rubles |
| 1 | Surface preparation (cleaning, degreasing) | m2 | 100 |
| 2 | Sandblasting a chimney | m2 | 240 |
| 3 | Primer of the pipe surface | m2 | 120 |
| 4 | Painting the pipe (1 layer) | m2 | 120 |
Prices are for labor only, excluding the cost of materials. If necessary, our company can additionally purchase all the necessary painting materials.
The final cost of the order is determined by the appraiser after a free site visit.
How we are working?
As you know, any painting work, be it painting metal structures or painting a facade, is the final stage.
To begin with, preparatory work is carried out: cleaning from dirt, old paint, sealing cracks, repairs, etc. And only then painting is done, usually in 2 layers.
After the cost of work, conditions, terms and all the nuances are agreed upon, a contract is concluded, the customer makes an advance payment, and our specialists with all the necessary equipment and equipment go to the site.
If you need to paint your chimney, feel free to contact us. Our specialists will perform the work efficiently and in the shortest possible time. Contact phone number
Types of repairs we carry out
Chimneys require preventive maintenance, which consists of a whole range of works.
One of the main procedures is painting. You might think that painting pipes is not necessary, because it only gives a cosmetic effect, but painting pipes is strictly regulated by Rostekhnadkhor and large fines are issued if it is not painted on time.
Without painting, the surface deteriorates much faster under the influence of the external environment, and if delayed, this may lead to the need for repairs.
It is much more profitable to paint the surface once than to spend money and time on regular finishing. In addition, coloring also performs a marking function, for which there are also its own rules.
The performance of chimneys is influenced by many factors. The most important thing is precipitation. High humidity will quickly destroy concrete or brick without a protective coating. Sudden changes in temperature or other destructive environmental factors also have a negative impact.
Weather conditions greatly influence the structure, but this influence is easy to control. If this is not done, the need for repairs will arise much earlier. And the solution is obvious - painting the pipes.
Completed work
Repair and painting of brick pipe, Krasnoarmeysk
- Task: Repairing the chimney trunk. Painting in two layers. Selection of materials.
- Result: The work took 12 days. A team of 3 people was involved. The work was completed 100% on time. Painting with materials OS-12-03.
Painting a chimney, Monino
- Task: Painting chimneys at the airport in Monino.
- Result: The work took 14 days. 2 teams of 3 people were involved. The work was completed 100% on time. Painting with materials OS-12-03, gf-021, PF-115.
Installation and painting of metal pipes in Dzerzhinsky
- Task: Dismantling the old metal pipe, installing a new metal pipe.
- The work took 15 days. A team of 3 people and a high-altitude crane were used to dismantle and install the metal pipe. The work was completed 100% on time.
Dismantling of a brick pipe in Losino-Petrovsky
- Task: Dismantling a brick chimney using the method of sequential dismantling of brickwork. Brick removal.
- The work took 30 days. A team of 3 people, loaders and dump trucks were used to remove the combat. The garbage was disposed of.. The work was completed 100% on time.
Marking objects
The professionals of our company are fluent in all technological methods of applying marking paint at a high level. Sometimes the standard height of lifting mechanisms is not enough to paint high-rise pipelines. Aerial platforms and loaders are designed for the average height range. We have a team of industrial climbers working specifically for high-altitude operations.
A similar situation occurs with all high-rise objects. There are a colossal number of them in our country and the world. Modern pipes installed at industrial facilities sometimes reach several hundred meters. For example, in Ekibastuz, Kazakhstan, the pipe length is 420 meters. High-rise pipes measuring 50-150 meters are found in almost any large populated area.
The technology for marking painting of masts, cell phone towers, and other stationary units and buildings involves applying bright alternating stripes over their entire visible surface, this is the answer to the question: “what color should the structure be.” Sometimes the opportunity to apply marking paint is provided even before the object is installed in its regular place. At the time of manufacture, before installation, still in the factory workshop, marking painting of the product is carried out.
There are also special requirements of the Federal Air Transport Agency, on the basis of which high-rise buildings are equipped with signal lighting and special painting, if we are talking about industrial facilities.
For hazardous production facilities, it is mandatory to periodically undergo an industrial safety examination, on the basis of which we can draw up an estimate for all necessary repair work and painting. After studying the EP data, our specialists go to the site for a visual inspection and draw up a work plan.
What is the cost of painting?
To find out prices for work, you need to call our manager. We will come to the site free of charge and make accurate cost calculations.
Key points on which the price of painting depends:
- The material from which the chimney is made;
- Complexity, volume of work, height;
- Number of layers and paints used (Russian, foreign). Customer's paint can be used.
Our company will perform a whole range of external and internal works. We can: replace rings and other elements, paint, putty, plaster, clean, perform all kinds of repairs, perform welding work and much more.
Brick is a universal material that is often used for the construction of chimneys. This building material has a long service life, and if necessary, brickwork can be easily repaired.
| Operation | Price | Unit |
| Cleaning the surface from old coating and rust | from 70 rubles | m² |
| Primer | from 80 rubles | m² |
| Coloring | from 90 rubles | m² |
You can find out the current price by calling the specified phone number. There is a system of discounts and an individual approach to each client.
Painting brick chimneys in Moscow and the Moscow region
To prevent the destruction of such a grandiose structure as an industrial pipe, it is necessary to carry out timely inspection, repair, and painting. We must also remember that painting is not only a way to extend service life, but also an opportunity to prevent plane crashes. For these purposes, marking paint is applied to high-rise buildings - alternating bright stripes applied to the entire visible part.
The paint must be applied to a high-quality surface, which is why, if necessary, you should not only prepare, but also repair the brick pipe. In some cases, it is enough to apply a layer of plaster; in advanced cases, new masonry is required.
If the surface of the pipe meets the established standards, the stage of applying a new coating begins, but before that you need to get rid of the old layer (if any), remove dirt, remove rust from hoops and other metal elements. Then priming occurs and a new layer of paint is applied to the surface of the brick.
Industrial climbers apply heat-resistant paint in dry, windless weather. Most often, special equipment is used - high-pressure apparatus; sometimes paint is applied manually.
— an experienced assistant and reliable partner in the field of repair and painting of industrial chimneys. Contact us if you need to carry out high-altitude work in Moscow, Moscow Region, other cities and regions of the Russian Federation.
Want to know more? Make a call
