Children love to draw. In addition to store-bought watercolors, make your own three-dimensional paints. This activity is exciting. Moreover, you can involve a child in production.
Such colors develop imagination and creativity. Expand the baby's understanding of the world. They develop tactile sensations, as you can draw with your hands.
Volumetric shaving foam paints
It is not necessary to deprive dad of the opportunity to shave. For such paints, you can buy a separate can of foam.
To make paints you will need:
- 2 parts shaving foam
- 1 part PVA glue
- Food coloring
- Mixing container
- Stirring stick
Prepare the necessary components.
Pour PVA glue into the mold.
Add 1-2 drops of food coloring. Stir. The amount of dye affects the final shade of the paint. If you need a rich color, add more. And vice versa.
Add shaving foam and stir.
Make as many flowers as required.
Using the resulting paint, the child uses his fingers or a brush to paint the prepared template or create his own masterpiece.
Depending on the amount of paint applied, the design takes on a convex shape. After drying it also gives an interesting tactile sensation. The paint is a soft, fluffy mass.
Drawing a three-dimensional picture
For drawing you will need cardboard, thick paper, thick disposable plates. You can also work on fabric, but it should not be too thin either. First, you need to prepare a sketch - a sketch of the drawing, then you can draw lines using 3D paints on it. They do this in the following ways:
- Cotton swab, brush. These are the easiest methods that do not require special preparation. You just need to take your equipment and start the creative process.
- An envelope. You can make an envelope from a file (multifold). The file is folded diagonally, one side is sealed with tape. The required amount of paint is placed inside and tied with a rubber band. The tip of the file is cut off, after which the material will be easily squeezed out.
- A bottle. Take a thin plastic bottle of office glue with a spout and fill it with paint. Used for drawing.
Strokes are applied generously to the paper, without skimping: they should be juicy and bright. After completing the picture, it must be dried. If foam and PVA were used to create the materials, the design is simply laid to dry for 3 hours on a flat surface. “Flour” paints are dried in the microwave for 10 seconds at maximum power. After turning off the device, you can notice that the picture has increased in volume and acquired a 3D effect. It will look original and beautiful, which will certainly interest your baby!
Volume paint made from flour
This paint can be made from flour. It turns out to be more environmentally friendly and suitable for drawing by very young children.
Required:
- Flour
- Fine salt
- Water
- Food colorings
- Mixing container
To make the paint loose, you can add baking soda.
Instead of food coloring, use gouache.
The advantage of this paint is that if you paint it in a thick layer, it can be baked in the oven or microwave. And if drawn on plastic, for example, a container lid, it can be cut out after drying. This is a great idea to make eco-crafts for the Christmas tree, Easter or any other occasion.
Place flour and salt in a bowl. Mix thoroughly. If you add soda, then also mix with flour.
Add water and stir. The dough should have the consistency of pancakes.
Add water gradually, thoroughly mixing the lumps each time.
Take some dough. Add dye liquid or powder. Mix thoroughly until smooth.
In the same way, make as many flowers as you need to create a craft.
If you are not satisfied with the thickness of the paint, dilute it before adding dye or after painting.
Unlike shaving foam paint, you can store this paint in a plastic bag or in jars with a lid in the refrigerator or freezer.
Everything for a child's development
We offer three recipes for making three-dimensional paints with your own hands for children's creativity and ideas for three-dimensional paintings. Children will be delighted with the unusual way of painting with puffy paint.
Volumetric paints made from shaving foam and PVA glue
Source: onelittleproject.com
Necessary materials:
- shaving cream;
- PVA stationery glue;
- food coloring or gouache.
How to do
To prepare three-dimensional paints, you will need to mix PVA glue and shaving cream in equal proportions.
Pour glue into a container and add shaving cream.
Pour in a few drops of food coloring/gouache. Please note that the color of the paint after drying will be darker than the original color of the finished mixture.
Mix all ingredients thoroughly. Volumetric paint for painting is ready! This way you can make a few different colors and get creative.
How to draw a three-dimensional picture
It is better to paint with three-dimensional paints on cardboard or thick paper. Draw a sketch of the drawing with a pencil. Take a wide brush and apply a thick layer of paint to the paper. Leave to dry overnight. As a result, you get a three-dimensional picture.
Another way: put the colored mixture into ziplock bags, make a hole in each and paint by squeezing the paint onto the paper.
Paint can be squeezed out of a bottle with a narrow neck.
WE RECOMMEND:
Volume paint made from flour
Necessary materials:
- 1 cup flour;
- 3 tsp baking powder;
- 1 tsp salt;
- water;
- food coloring or paint.
How to do
Mix all dry ingredients. Dilute the mixture with water to the consistency of pancake batter. Mix the dough thoroughly with a whisk so that there are no lumps. Divide the mixture into as many parts as you want to have colors. Color with food coloring.
Source: happinessishhomemade.net
How to draw
It is better to paint on a sheet of cardboard with a brush or squeeze paint out of a bag/bottle. When the picture is drawn, place it in the microwave for 30-45 seconds. You will see the paint increase in volume. Before giving the finished masterpiece to your child, make sure that the paint has cooled down.
Glowing volumetric paints
Necessary materials:
- UV lamp;
- fluorescent helmets (on Ozone: activate the discount code OZONBDJ91B , in My-Shop);
- flour;
- baking powder;
- water;
- cardboard.
How to do:
Mix flour, water and 2 tsp. baking powder to form a thick, flowing mixture. Add fluorescent helmets.
How to draw
Source: kidsplaybox.com
You need to draw in the dark with the ultraviolet lamp on, applying paint to the cardboard in any way. Once completed, place the drawing in the microwave for 30 seconds to allow the paint to expand.
Ideas for creativity
For painting with three-dimensional paints, it is convenient to use disposable paper plates.
During the painting process, glitter and rhinestones can be applied to the paint surface. It looks very impressive.
With paint made from shaving foam and PVA glue, you can paint not only on cardboard, but also on thick film (for example, on a ziplock bag) or glass.
WE RECOMMEND ON LABITINT.RU:
If you liked the ideas, share them with your friends on social networks by clicking the button below.
SIMILAR ARTICLES:
- recipes,
- drawing
How to draw a 3D picture
The image can be applied to cardboard, thick paper or fabric. Instead of a palette, you can use disposable plates in which paints are laid out by color.
A sketch is drawn on the selected “canvas” with a pencil. Then paint is applied along the drawn lines.
This can be done with a brush or cotton swab, onto which the material is collected and transferred to the canvas. This is the simplest and most accessible method even for less skilled artists.
The second option is to pour the paint into a glue tube with a narrow spout.
For the third, you can use a stationery file or even baking parchment.
The multifora (file) will need to be folded diagonally, and the parchment rolled into a bag. Paint is placed inside the resulting cone and the upper edge is tied or clamped.
You can draw by squeezing paint out of a hole cut in the narrow edge of a cone - just like when decorating cakes with cream from a pastry syringe.
There is no need to save materials - they need to be applied in a thick, rich layer. When the picture is ready, it needs to be given time to dry.
For shaving foam-based paints, this period is about 3 hours. Dry flour products for 10 seconds in the microwave.
After removing the pattern from the device, it will be noticeable that the pattern has become more convex and three-dimensional. This effect delights the kids.
Source
Examples of using air paints
Volumetric dyes make beautiful designs. At the same time, they are limited only by the imagination of the baby and his parents. The following images will look impressive and attractive:
This is not a complete list of possible subjects for paintings. An autumn tree with leaves painted in voluminous colors will look beautiful. During the drawing process, it is permissible to cover the surface of the picture with glitter or rhinestones.
In this case, it is important to first make a mock-up of the design, and then apply volumetric dyes. This will help you get a neat and beautiful result.
Volumetric paints help create many interesting compositions. This type of material will definitely interest the baby and bring something new to his creativity. At the same time, there are different recipes that will help you obtain safe material. With its help you will be able to create real masterpieces.
Source
