What is the best glue for wood: we reveal the basic principles of selection and use

TOP 5 polyurethane based adhesives

Soudal 66A

Soudal 66A
Our top five is opened by glue from the Belgian company Soudal. This adhesive is highly resistant to the following effects:

• high humidity;
• heat;
• loads of various types - both static and dynamic.

This polyurethane adhesive is well adapted to most materials, from wood to concrete and metal. In addition, the glue performs well when gluing materials such as roofing felt, drywall and asbestos.

In general, the price is affordable, and the glue itself is not bad. That's why you can take a closer look at it.

pros

1. Adequate cost.
2. Excellent compatibility with any type of wood.
3. Good bonding to any surface, whether dry or wet.
4. High quality and speed of gluing.
5. Easy to apply.
6. High resistance to negative effects.

Minuses

1. Short shelf life.
2. Beneficial properties are lost at temperatures below +5°C.

Soudal 66A

Akfix PA370 D4

Akfix PA370 D4
“Almost Bronze” goes to the Akfix model. This model is a ready-made solution based on polyurethane for gluing wooden parts to a concrete or metal surface. High resistance to moisture, load and other external factors makes this adhesive popular among users.

To make the most durable connection, the outside temperature must be at least +5 degrees. And in order for the seam to remain as strong as at the very beginning, you need to make sure that the temperature range is from -40 to +100 degrees.

Important! Uncured glue can be removed with acetone.

pros

1. Easy to use.
2. Low viscosity.
3. Sets quickly and dries.
4. Resistance to moisture and high temperature.

Minuses

1. May catch fire.

Akfix PA370 D4

Kleiberit 501.0 D4

Kleiberit 501.0 D4
“Bronze” is awarded to one of the best polyurethane adhesives from a German manufacturer. This glue model is an example of quality and not too much price.

The basis of the adhesive was polyurethane, which is responsible for moisture resistance and strength under different temperature conditions. They can connect wooden elements to any surface.

The high quality of the glue means that it can at least be used everywhere and in any weather. You only need to wait 24 hours for it to harden.

In general, this glue model is described in reviews only on the positive side. True, the smell of this glue is very strong, so you will have to wait until it disappears.

pros

1. Easy to use.
2. Hardens quickly.
3. Applies everywhere.
4. Resistant to aggressive environments and sudden temperature changes.

Minuses

1. It takes a long time to dry.
2. The aroma is very strong.

Kleiberit 501.0 D4

Bostik Tarbicol PU 1K

Bostik Tarbicol PU 1K
In second place in our ranking is polyurethane adhesive produced by a French company called Bostik France. Using this glue, you can easily lay parquet plates of varying board lengths on any surface, be it wood, cement, concrete or metal.

All joints created using this glue have high strength and durability, which do not disappear even after a long time. This is especially evident in a situation where wooden parts for the “Warm Floor” system are fastened with such glue. When the floor is heated, the parts stay together and do not separate.

Special attention should be paid to the composition of the adhesive substance. You will not find any solvents or water in it. In addition, the consistency of this glue is not liquid, but in the form of a cream paste.

pros

1. High efficiency.
2. Easy to use - just apply and wait.
3. Easy to apply to wood surfaces.
4. Helps smooth out uneven surfaces.
5. High moisture resistance - this glue can be used to fasten wooden parts even in the bathroom or kitchen.
6. Convenient packaging.
7. Frost resistance is at a good level - the structure of the composition does not change at temperatures down to minus 20°C.
8. Does not burn.

Minuses

1. High price.
2. It is considered quite toxic.

Bostik Tarbicol PU 1K

Chimiver Adesiver Elastic

Chimiver Adesiver Elastic
Wood glue from Chimiver takes first place in this rating. And this is not just like that.

The model under consideration is primarily intended for working with parquet. The composition of the glue allows the wooden elements to be held together as tightly as possible. However, you have to wait a long time - about three or four days.

You will not find the following components in this glue:

• epoxy resin;
• amines;
• isocyanates;
• solvents;
• water.

When the adhesive cures, the joint becomes highly resistant to a range of negative effects, including fire and water, wear and temperature changes.

Important! The glue should be applied at room temperature - then the gluing effect will be ensured.

pros

1. Reasonable price.
2. High efficiency.
3. Economical consumption.
4. Long shelf life.
5. Convenient packaging.

Minuses

1. There are no cons to be found.

Chimiver Adesiver Elastic

You might be interested in knowing which hair dryer you should buy .

Problems associated with the use of formaldehyde resins for the production of wood and other boards:

The use of formaldehyde resins in the production of wood-based panels and other products has a number of problems, prohibitions and restrictions:

– toxicity of urea-formaldehyde resins (affecting the health of production personnel and consumers);

– a ban on the use of wood-based materials in educational and medical institutions due to the emission of phenols and formaldehydes;

– insufficient strength of the material, leading to rejection of products made from it, damage or loss of furniture during movements (moving, repairs, etc.);

– instability of the material to moisture (if moisture gets on wood-based furniture, it begins to deteriorate);

– emissions of harmful substances during recycling, production and operation of wood-based products.

The production of formaldehyde resins is already an unacceptable burden on the environment, because Currently, the vast majority of formaldehyde resin manufacturers in Russia and other countries use outdated technology for resin synthesis from methanol-stabilized formaldehyde.

As a result of their activities, these enterprises annually discharge into treatment facilities more than three thousand tons of tar water containing about forty tons of formaldehyde and over three hundred tons of methyl alcohol.

TOP 3 adhesives based on epoxy resin

ABRO ES-507

ABRO ES-507
Our TOP 3 includes a model of absolutely transparent epoxy glue. This universal product from ABRO is one hundred percent suitable for gluing wooden elements to a surface made of concrete, cement or other material.

The fairly compact size of the tube allows you to work with small parts, which is convenient. The composition contains only high-quality components, therefore the quality of gluing and setting is very high.

pros

1. Small price.
2. No excess glue in the composition.
3. Convenient packaging.
4. Versatility. The glue bonds wood well to any material.
5. High quality of gluing and setting.

Minuses

1. There are no disadvantages.

ABRO ES-507

Uhu Plus Endfest 300

Uhu Plus Endfest 300
This epoxy adhesive from the German company Uhu Plus takes second place. Firstly, it has very good adhesion properties. He will be able to glue wood with another material, no matter what it is. But he won’t be able to connect wood with glass.

Secondly, this glue dries quite quickly - it takes about an hour and a half. But the connection will not be completely ready so quickly - it is better to touch the glued elements the next day after the procedure. In this case, the applied seam will be strong and durable.

Among the advantages of this glue from a German brand are high strength, resistance to mechanical influences, and moisture. It is characterized by reliable initial setting and high adhesion.

Judging by the reviews, many people are happy with this product. The elements are held together very tightly, the strength of the adhesive seam is very high, and the glue itself is impervious to moisture and other negative influences.

pros

1. The reliability of the adhesive seam is very high.
2. Resistant to moisture and temperature changes.
3. Glues and sets quickly.
4. High quality glue.

Minuses

1. Difficulty in preparing the adhesive solution.

Uhu Plus Endfest 300

Super Epoxy Moment

Moment Super Epoxy
The best epoxy glue in our TOP 3 was Moment glue. It is very easy to use, and therefore domestic craftsmen love it. Its packaging is made in such a way that it is convenient to apply adhesive made on the basis of epoxy resin, and then fasten them to other materials, for example, concrete, plastic, porcelain, and so on.

Unlike others, this glue really deserves its first place.

pros

1. High efficiency of adhesive composition.
2. Ease of use.
3. There is no need to prepare solutions - everything is ready from the very beginning.
4. Compact packaging.
5. Glue resistance to various negative conditions.
6. You need a little glue to firmly secure the wooden elements, and in several places at once.
7. Resistant to moisture, aggressive media (solvents, oils).

Minuses

1. An unpleasant odor that will disappear some time after applying the glue and drying it.

Super Epoxy Moment

You may be interested to know which corded screwdriver is worth getting .

The Best Adhesives for Repairing Wooden Musical Instruments

Such substances are used to repair pianos and other instruments where it is necessary to close a crack or connect two broken parts. Due to the constant vibration from playing, they have a more durable composition.

Titebond Liquid Hide Wood Glue - with protein

This glue is the best for repairing fittings due to its composition of natural protein emulsion, which gently affects the structure of hardwood fibers.

With its help you can easily repair the body of a piano, guitar or pipe. It is produced ready-made and does not require dilution.

Pros:

• can be processed well with abrasives, so the surface can be sanded to perfection;
• suitable for creating the effect of aging wood by causing cracking on the top layer;
• long working hours allow you to calmly align the parts, accurately apply the substance and provide the necessary pressure;
• suitable for precision assembly;
• does not require shaking or heating;
• viscosity reaches 4000 mPa*s;
• stable in cold weather;
• does not contain volatile substances harmful to humans;
• can be applied with a roller, brush or through a dispenser in the spout;
• stored for 24 months;
• Available in a stylish plastic bottle with a dispenser.

Minuses:

• can only be used in rooms with a temperature of +10 degrees;
• not suitable for elements subject to static loads (for example, the neck of a guitar or the nut that is pulled by strings);
• causes eye irritation;
• sometimes it is necessary to hold the connected parts for up to 20 minutes to ensure accurate fixation;
• cost 500 rubles for a container of 237 ml.