Abro sealant is intended for repair, partial or complete replacement of any type of car gaskets, for sealing joints, filling seams and gluing glass. It is suitable for working with trucks, passenger vehicles and other equipment.
When applied to surfaces, the sealant can take the desired shape and withstands squeezing, stretching, and movement. "Abro" is not afraid of water and oils, auto chemicals and petroleum products, so it is ideal as a car product.
All mixtures produced under the Abro TM are multi-purpose. Therefore, they are divided into several types, according to their component composition.
High temperature
Red silicone sealant is considered high temperature. Abro red sealant contains a reddish-yellow fine pigment. It is this that helps the mixture withstand high temperatures. During the drying process, no odor appears and no acetic acid is released.
Not suitable for use in repairing products that come into contact with gasoline.
- Operates at temperatures up to +370 degrees.
- The applied layer should not exceed 6 mm.
- When dry, a flexible, uniform seam is obtained.
- Dries within 24 hours.
- Retains its shape during pulsations and destruction.
Red high-temperature acriplast is available in packages of different weights (42.5; 85; 226; 310 g), which is convenient when choosing a product.
To change the gasket or apply a sealing seam, a tube of 85 g in size is sufficient.
Silicone acid
Abro black on silicone is suitable for restoration work on changing gaskets, insulation, and seals among elements of car parts.
Advantages of silicone Abro:
- Operates at temperatures up to +260 degrees.
- The layer thickness is optimal.
- Maintains configuration during pulsations and destruction.
- When hardened, a flexible, durable seam is obtained.
- Ease of use.
- High adhesiveness.
- Final drying is achieved within a day.
This composition is available in packages weighing 42.5 g and 226 g.
Silicone neutral
Abro 999 is necessary when replacing any type of gaskets on a car. Advantages:
- Operates at temperatures up to +343 degrees. New types have added copper dust and such compositions can withstand temperatures up to 371 degrees.
- Compatible with any liquids other than fuel.
Abro 999 is available in gray and black in 42.5g, 85g and 310ml packs.
Series 1100 and 1200
Abro 1100 is suitable for different surfaces. Characteristics:
- Suitable for insulating and protecting duralumin, wood, rubber, metal, clay surfaces.
- Operates at temperatures from -50 degrees to +200 degrees, so it can be used for internal and external work.
- The composition contains components that prevent the formation of mold and mildew.
Abro 1100 is available in white, transparent and black in packs of 70 g and 280 ml.
The structure of Abro 1200 has similar properties. It is available in white, transparent, black, with a volume of 85 g or 310 ml. It is distinguished by its water resistance and moisture resistance. Remains flexible when stretched up to 25 percent.
We recommend watching the overview video:
ABRO sealant
ABRO Multi-Purpose Sealant is designed to repair or replace most types of gaskets found on vehicles. It is made on the basis of silicone and polymers, has high elasticity and strength, is able to take absolutely any shape, and hardens instantly. ABRO silicone sealant successfully withstands tension, compression and shear and is not destroyed at all under the influence of water, automobile oils and antifreeze. It also has high resistance to brake fluid and gasoline.
Applications of Abro sealing materials
Abro sealant is used to repair or replace (whether full or partial) all types of automotive gaskets, to work on joints, seams and glass.
Used when working with all types of technical and transport vehicles.
Why is this sealant ideal for cars? After application to the surface, it takes the shape necessary for work and withstands all types of deformation, pressure, compression, and movement.
In addition, it retains all its properties when exposed to oil, water, chemical machinery and petroleum products.
Black and gray ABRO sealants
Black (as well as transparent and blue) sealant can be used for most types of damaged gaskets, and can withstand heating up to 260 0 C. The product is capable of creating a gasket in a few seconds, easily takes any shape, is endowed with high strength and elasticity, and is resistant to deformation and cracking. It is also resistant to water, oil, transmission fluids and antifreeze.
ABRO Gray Silicone Sealant was specifically developed for repairing gaskets in Japanese car brands, but the product can also be used in car engines manufactured in the USA and Europe. The sealant is resistant to almost all liquids present in the car, with the exception of gasoline. It is ideal for forming gaskets in vehicle components such as gearbox, intake manifold, water pumps, thermostat housing, and oil pan. The composition is high-temperature (withstands up to 343 ° C), odorless.
Other brand products
To maximally satisfy customer demand, the American manufacturer produces special-purpose sealants in series and in the form of individual products. These include:
- Penetrating silicone with increased fluidity Abro 3200. It is important to use silicone sealant for repairing glass, headlights, car sunroofs, gluing metal, ceramics, wood, rubber. Advantages: temperature from -65°C to 206°C, increased fluidity, deep penetration, vibration and heat resistance, neutral to aggressive liquids.
2. Liquid radiator sealant SL-624, containing bentonite clay. Used to eliminate leaks in car cooling systems, including aluminum ones. Allows you to perform temporary repairs of radiators, BCs, cylinder head gaskets, and heating systems. Packaging – 325 ml. The product is also available in the form of a dry powder (20g), which must be poured directly into the radiator of the car.
3. Polyurethane glass sealant UR-3000. Can be used for gluing windshields, sealing joints, gaps and seams from moisture. Suitable for external facade work. Effectively adheres to glass, ceramics, plastic, wood, stone. Complete hardening time is 3-4 hours. After hardening, the surface can be painted. Packaging – 300 ml tube.
4. One-component structural silicone SS-9895 for body work. Creates a flexible waterproof layer on the treated surface and adheres well to metal, stone, and concrete. Provides absolute sealing and does not cause corrosive processes. The composition is non-toxic and has no specific odor. Sold in tubes of 310 ml.
5. Aerosol copper sealant Abro CG-418-R. Area of use: sealing automobile and motorcycle gaskets, including cylinder head seals, exhaust pipes, carburetors. Belongs to the category of high-temperature compounds and contains copper dust. Well prevents gaskets from being squeezed out during assembly of components and assemblies.
Another popular product is Abro RS-425-CLR - liquid rubber rubber spray. Area of use: repair of cars, water pipes, swimming pools, door hatches. It eliminates leaks well, forms a moisture-proof elastic coating, fills voids and small cracks.
Attention: The Abro company produces a special product GR-600 - a remover of sealants and silicone gaskets.
To effectively clean a metal surface from Abro silicone sealant, grease, glue, varnish, paint, just spray the product, leave for 5-10 minutes and remove the old coating with a spatula.
Mode of application
- First of all, it is necessary to remove fragments of the old damaged gasket and clean the surface thoroughly.
- Then remove the cap from the sealant, pierce the protective foil and put on the supplied nozzle.
- Next, you need to cut off the tip of the nozzle enough to create a hole of the required size.
- The sealant is applied to the entire mating surface around the perimeter, forming a layer whose thickness is about 2-3 mm.
- Allow to dry for 10 minutes before assembly. The formed gasket will dry completely after 24 hours.
How to remove ABRO compounds?
If the product has not yet dried, it is not difficult to remove it. You just need to wipe off any excess, drip or stain using a cloth soaked in alcohol. The composition, which has already undergone polymerization, will have to be removed mechanically. It is cleaned off with a blade, knife, sandpaper, or grinder.
In difficult cases, you can buy a special cleaner from the Abro line (removal of silicone sealants) in the form of a spray. In addition to sealing pastes, you can easily wipe off paint, varnish, oil, and glue with it. It is enough to spray the problem area, and after 10 minutes remove the softened product with a spatula.
User reviews
ABRO sealant received the following reviews. Users appreciated the effectiveness and inexpensive cost of this product. They noted that the sealants harden quite quickly, but are average in terms of durability and reliability. Many do not recommend using them for fastening elements of high-speed motors that carry heavy loads.
Service station workers and car owners are increasingly purchasing Abro sealant because it is superior in quality to similar products. TM Abro produces compounds for the purpose of servicing and repairing vehicles. Sealants are useful and important in difficult situations when it is not possible to contact a service center or immediate repair of a breakdown is required.
Varieties
They produce several types of sealants that are used for car body repairs:
- seam adhesive sealants. They are used most often, are single-component, and can be used to seal seams. The mixture allows you to obtain perfectly even seams; special guns are used to apply the composition - pneumatic or mechanical. They produce such mixtures of different colors - black, gray, white, beige and others;
- seam sealant under the brush. Supplied in metal cans, suitable for brush application. Can be used for sealing metal products, as well as for filling welding and joining seams. This variety is used for the bumper area, luggage compartment and engine compartment; the mixture guarantees reliable, high-quality protection against corrosion and moisture;
- sealing tapes. Such tapes create the most even seam, have an adhesive backing, and are very convenient and quick to stick. They do not need to be dried, they can be painted immediately;
- sealants in tubes. They are used when it is necessary to seal small objects. The compositions are available in different colors, are suitable for sealing metal and other materials, and have good adhesion even to the old paint layer. After drying, the composition can be painted with any enamel.
So, there are many different types of caulking compounds, each of which takes a different amount of time to dry. To find out exactly how long it will take for a particular sealing mixture to dry, you need to read the instructions for use, according to which it is important to apply the composition to the surface of the car.
Types of Abro sealants
All mixtures produced under the Abro TM are multi-purpose. Therefore, they are divided into several types, according to their component composition.
High temperature
Red silicone sealant is considered high temperature. Abro red sealant contains a reddish-yellow fine pigment. It is this that helps the mixture withstand high temperatures. During the drying process, no odor appears and no acetic acid is released.
Not suitable for use in repairing products that come into contact with gasoline.
- Operates at temperatures up to +370 degrees.
- The applied layer should not exceed 6 mm.
- When dry, a flexible, uniform seam is obtained.
- Dries within 24 hours.
- Retains its shape during pulsations and destruction.
Red high-temperature acriplast is available in packages of different weights (42.5; 85; 226; 310 g), which is convenient when choosing a product.
To change the gasket or apply a sealing seam, a tube of 85 g in size is sufficient.
Silicone acid
Abro black on silicone is suitable for restoration work on changing gaskets, insulation, and seals among elements of car parts.
Advantages of silicone Abro:
- Operates at temperatures up to +260 degrees.
- The layer thickness is optimal.
- Maintains configuration during pulsations and destruction.
- When hardened, a flexible, durable seam is obtained.
- Ease of use.
- High adhesiveness.
- Final drying is achieved within a day.
This composition is available in packages weighing 42.5 g and 226 g.
Silicone neutral
Abro 999 is necessary when replacing any type of gaskets on a car. Advantages:
- Operates at temperatures up to +343 degrees. New types have added copper dust and such compositions can withstand temperatures up to 371 degrees.
- Compatible with any liquids other than fuel.
Abro 999 is available in gray and black in 42.5g, 85g and 310ml packs.
Series 1100 and 1200
Abro 1100 is suitable for different surfaces. Characteristics:
- Suitable for insulating and protecting duralumin, wood, rubber, metal, clay surfaces.
- Operates at temperatures from -50 degrees to +200 degrees, so it can be used for internal and external work.
- The composition contains components that prevent the formation of mold and mildew.
Abro 1100 is available in white, transparent and black in packs of 70 g and 280 ml.
The structure of Abro 1200 has similar properties. It is available in white, transparent, black, with a volume of 85 g or 310 ml. It is distinguished by its water resistance and moisture resistance. Remains flexible when stretched up to 25 percent.
We recommend watching the overview video:
Checking the quality of gluing
Before picking up the car from the auto repair shop, it is recommended to check how well the work was done. And when replacing a double-glazed window with your own hands, it is important to read in the instructions how long it takes for the sealant to dry after gluing. In order not to spoil the work, you cannot start checking the quality of gluing before the sealant has set.
To check the strength, you need to press on the glass from the inside and listen to the sound. With high-quality gluing there will be no sounds or crackles.
Regardless of how long the car sealant takes to dry, it is important to start checking the tightness only after three days, so that the glue has time to crystallize. You can also check the tightness by washing the car at a car wash that uses high-pressure washers. If the gluing is done well, no water will leak through the seam after washing. And if there are leaks through the joint sealant, and the gluing was done by auto repair shop specialists, they will have to correct their work.
How to use sealant
For all varieties of Abro, the application steps are the same:
- Cleaning the surface to be repaired in order to achieve the greatest adhesion of the substrates: remove the previous coating, remove the previous gaskets. For this, a special cleaning fluid or scraper is used.
- Open the sealant (remove the plastic nozzle, pierce the foil, put on the plastic nozzle, trim the tip on it the width of the gasket) and apply the required layer to the gasket.
The thickness of the layer must correspond to the type of composition. The mixture is not applied to the areas where the bolts are attached.
- The layer must dry within 10 minutes. Then assemble the product. Just don't overtighten the bolts.
- After a day, the product is ready for use.
How long does acrylic sealant take to dry?
acrylic
– after 2 hours, surface drying occurs, and completely hardens within 4 weeks;
parquet - dries
like
acrylic sealant
, for covering the floor it is very important that the mixture hardens properly, the degree of sealing depends on this.
Interesting materials:
How to run a project in IntelliJ? How to start a project in Xampp? How to run python via cmd? How to run python via command line? How to run python from command line? How to run Python in VS Code? How to run ads to competitors' followers on Instagram? How to run Stories advertising? How to run advertising on Instagram through Instagram? How to launch a website on hosting?
Precautionary measures
When working with automotive sealants, the following precautions must be observed:
- Since some sealants can release acetic acid when drying, therefore, when working, use PPE - gloves, goggles, a mask. If the product gets on an open area of skin or on the mucous membrane of the eye, rinse immediately with running water. If irritation occurs, it is better to consult a doctor.
- The process is carried out in a well-ventilated area.
- After using the product, close the tube tightly and place it out of the reach of children.
Drying time in winter and summer
To accurately determine how long the sealant takes to dry, it is important to take into account the period of the year in which this composition is used. In winter, the glass gluing procedure is performed only in a closed garage, and in summer, car glass can be replaced even outside.
Taking into account the difference in air humidity and temperature, in summer the sealant dries for at least one and a half hours, and in winter - from two and a half to three hours. During this time, it is strictly forbidden to move the car or open the doors or windows of the car. Any, even the slightest movement of the car can lead to vibrations of the glass, as a result of which the seal is broken.
General recommendations
Considering that information can only be obtained from the data on the product packaging, you should focus on:
- the basic setting time before which the seam can be smoothed or leveled is no more than 10 minutes;
- Accordingly, the length of the seam to be filled should be such that the master has time to apply and smooth the silicone before it sets. This parameter is determined individually;
- Despite the fact that manufacturers indicate a complete curing time of 24...48 hours, you should not load the structure in which the seams were filled earlier than after 72...240 hours. The duration of the “insurance period” depends on the size of the seam; when filling large and deep cavities, the basic estimated time should be multiplied by 2…3.