AK-511 enamel for marking on public roads

Requirements for road paints

Marking is carried out in the warm season. It must comply with GOST R51256. Road paints for marking asphalt must not only reflect light, but also have other technical characteristics.

• The paint must be quick-drying. Often within 5 minutes. after application at t=+20°C it hardens.
• Paint consumption should be small.
• Moisture resistance.
• Resistant to temperature changes.
• High resistance to wear and mechanical damage.

• The composition should be conveniently applied, often using a spray gun and a stencil laid on the asphalt. Thanks to this technology, application is quick, with minimal consumption of reflective paint (REP).
• The paint should not interfere with the quality of adhesion of car tires to the roadway.

The coloring composition must be bright in color so that at night, in bad weather conditions, the markings are visible to the naked eye.

Road marking paint AK-511

Road marking paint AK-511 can be used for marking general purpose roads, parking lots, warehouses, airfield runways, etc.

Weather-resistant road paint AK-511 is a ready-to-use composition that is easy to use in field conditions. Applied in one or two layers, it is highly resistant to wear and is resistant to industrial atmospheres.

DELIVERY CONDITIONS:

Price is negotiable. The cost depends on the total order volume of paint and varnish products.

Delivery to transport companies in Novosibirsk is free of charge, as well as pickup from a warehouse in Novosibirsk.

PRODUCT DOCUMENTATION:

Provided: Certificate of State Registration, Quality Certificate.

The optimally selected and balanced formulation of the road marking composition AK-511, produced by the Siberian Paint and Varnish Plant the SibLKZ trademark , allows the resumption of road traffic 30 minutes after applying the markings. Ideal for applying new markings and updating existing ones.

RECOMMENDATIONS FOR USE:

Recommended for applying horizontal markings on asphalt, asphalt-concrete, concrete surfaces of public roads, airfields, parking lots and parking areas, warehouse areas.

SURFACE PREPARATION:

Road marking paint AK-511 is applied to a dry road surface free of dirt and dust.

APPLICATION CONDITIONS:

Marking with AK-511 composition must be applied at a steady temperature from +5ºС to +30ºС and a relative humidity of no more than 85%.

PREPARATION OF MATERIAL:

Before applying the marking, carefully mix the marking paint AK-511 with a stirrer until the sediment completely disappears and uniformity is achieved throughout the entire volume. After this, wait 10 minutes until the bubbles disappear.

If necessary, bring AK-511 to working viscosity, depending on the dyeing method. To bring it to working viscosity and wash equipment, use solvent R-4. The degree of dilution can reach up to 15%.

The recommended working viscosity of the material for pneumatic spraying is 17-25c, for airless spraying using specialized marking machines - up to 100c, when applied with a brush or roller - 40-50c. Viscosity is measured using a VZ-246 viscometer with a nozzle with a diameter of 4 mm at an ambient temperature of 20±2ºС.

During breaks in work, the marking paint should be stored in a tightly closed container; before resuming painting work, the AK-511 composition must be mixed and left for at least 10 minutes until the bubbles disappear.

APPLICATION INSTRUCTIONS:

Application of road marking paint AK-511 is possible by airless, pneumatic spraying, brush, roller using specialized machines for applying road markings.

When using pneumatic spraying, the distance from the spray gun nozzle to the surface to be painted should be 200-300mm, air pressure 1.5-3.5 kgf/cm2, nozzle diameter 1.8-2.5mm. Application modes are selected for each individual case, depending on operating conditions and the brand of the device.

The recommended number of enamel layers is 1-2. The consumption of enamel for marking the roadways is 400–600 g/m2. Consumption depends on the painting method, the quality of surface preparation, and the level of personnel qualifications.

Glass beads are applied using specialized equipment on top of a freshly applied layer of paint. In the absence of special equipment, it is permissible to pre-mix reflective glass beads directly into the enamel solution. The average consumption of glass beads is 300g/m2.

Recommended thickness and theoretical consumption for a single layer coating:

Paint consumption for marking AK-511 is 400-600g/m2.

The number of coating layers is determined by the thickness of the single-layer coating obtained depending on the application method.

Drying time for a single-layer coating with a thickness of 300 microns:

Drying time at a temperature of 20±2ºС is no more than 30 minutes.

PACKAGING, TRANSPORTATION, STORAGE:

Paint packaging - in accordance with GOST 9980.3., marking in accordance with GOST 9980.4. The transport container must be marked with: a danger sign in accordance with GOST 19433-88 (class 3), classification code 3313, UN number 1263.

Transportation and storage - in accordance with GOST 9980.5.

Guaranteed shelf life is 6 months from the date of manufacture.

Store in tightly closed original containers, protecting from moisture and direct sunlight. Storage temperature from -30°С to +40°С.

Safety measures during work:

Occupational health and safety is carried out according to the technical documents of the work manufacturer, taking into account the properties of the paint.

The toxicity and fire hazard of AK-511 road paints is due to the presence of aromatic and mixed solvents in their composition. Solvents in terms of the degree of impact on the human body belong to hazard class 3, the maximum permissible concentration in the air of the working area is 150 mg/m3.

When applying AK-511 road paint outdoors, you must ensure that the work area is well ventilated. Workers involved in applying road markings must use rubber gloves and protective pastes such as “biological gloves.” To protect the respiratory system, it is necessary to use gas-dust respirators.

It is prohibited to apply road paint indoors without personal protective equipment. To protect the respiratory system, use an insulating hose gas mask.

Road paints are classified as flammable liquids due to the presence of solvents. When working with road paint, it is necessary to comply with fire safety requirements: have fire extinguishing equipment at the workplace, use tools and devices made of non-sparking material, do not use open fire in the workplace, and do not smoke.

If AK-511 paint catches fire, it is necessary to use the following fire extinguishing agents: sand, felt felt, asbestos blanket, foam or carbon dioxide fire extinguisher, foam installations, finely sprayed water.

These technical data are obtained from laboratory tests and practical experience. Incorrect use of the material does not guarantee the quality and service life of coatings.

Specifications for this product are subject to change without notice.

Features of choosing enamel for marking

The composition of the paint and varnish material for marking will determine the conditions of its use.

• Climatic features of the region.
• Traffic intensity. On highways, wear-resistant materials are needed for marking. Two-component formulations are suitable.
• physico-chemical features of asphalt pavement.

Acrylic

Acrylic paint is available in a concentrated state, so it must be diluted with water to the desired thickness. It is easy to use and can be sold ready-made, in aerosol form.

Acrylic-based paints can be applied using any method, often using aerosol spraying. Such compositions can be applied not only to asphalt, but also to oil-bitumen and concrete road surfaces.

It is necessary to work with water-dispersed compounds in warm and dry weather, since if it gets wet immediately after application, the dye can be washed off from the road surface.

The polyacrylic mixture hardens half an hour after painting.

Alkyd

Alkyd dyes have a rubber base. They appeared relatively recently. They have high adhesive properties and increased wear resistance. They perform well on high-speed highways. Consumption per 1 m2 may vary for different types of coatings. This paint cannot be applied using the aerosol method.

Other enamels, in which reflective powder is mixed, can be used on less busy roads and where road markings have already been painted.

Use on busy roads is not recommended, since the distribution of luminous particles in them is uneven.

Two-component

These are innovative enamels. Their production is carried out using modern technologies. The composition does not include a solvent, and the concentration of reflective pigment is much higher than that of other compositions.

Such paints have high strength and adhesive characteristics. The applied markings are not damaged even by snow removal equipment. Two-component enamels can be used on any type of coating.

To apply them, you can use both classic aerosols and complex special drawing equipment. The mixture consumption does not exceed 0.5 kg per m2. Airfield markings can be applied.

Application technologies

Road markings are applied using two methods, the choice of which depends on the physical state of the paint being applied.

1. Cold state. This application technology is used when working with enamels or dyes based on natural solvents, cold plastics, and water-dispersed coloring compositions. This method applies markings to areas with a lot of surface wear, for example, at pedestrian crossings. The service life of the marking is about two years. When traffic is heavier, the hot paint application method is used.
2. Thermoplastics and thermoplastic yellow tapes are hot Work is carried out at ambient temperatures from +5 to +35°C.

AK-511 paint for road markings, black

AK-511 enamel is a suspension of light- and weather-resistant and color pigments, fillers and special additives in a solution of German-made acrylic resin, which has significantly improved the quality of the produced enamel, adhesion and weather resistance, wear resistance and durability, long-term water resistance, oil and gasoline resistance.

Purpose:

The material is used for applying marking lines on the roadways of highways, airfield runways, with asphalt, concrete or asphalt concrete surfaces, ensuring the operation of the marking layer coating both during the day and at night.

Peculiarities:

• the material has high light resistance (preservation of whiteness under UV irradiation);
• has high impact strength;
• the solution has high hardness;
• has high abrasion resistance.

Mode of application:

Mix thoroughly and, if necessary, dilute to a working viscosity, which is selected by the consumer depending on the method of application and the condition of the road surface. Thinners - toluene, xylene, butyl acetate or solvent R-4 in an amount of at least 10% of AK-511 enamel.

It can be applied using all known methods: with road marking machines, as well as with a paint sprayer or manually with a brush or roller using a stencil.

Markings should be applied in dry weather on a dry road surface cleared of dirt and dust at a steady air temperature of +5 to +40 C and a relative air humidity of no more than 75%. Applying enamel for road markings at temperatures below +5 0C reduces wear resistance.

It is not allowed to apply enamel to an unprepared coating. To achieve optimal service life of markings on roads with heavy traffic at pedestrian crossings, stop lines, arrows, the thickness of the wet film should be at least 600 microns, dry 400 microns, and on roads with less intense traffic the thickness wet film – 400 microns, dry – 250 microns.

Paint consumption is 0.9 and 0.6 kg/m2, respectively.

To enhance the effect of reverse reflection, glass beads with a diameter of 100 to 600 microns at a rate of 350-400 g/m2 must be sprayed onto freshly applied enamel no later than 5 seconds.

The marking equipment is washed with R-4 solvent.

Precautionary measures:

Do not work near open fire sources.

Work should be carried out with good ventilation, wearing rubber gloves, using personal protective equipment.

The guaranteed shelf life of the enamel is 9 months from the date of manufacture.

Road enamel AK-511

This is road paint used to mark streets and roadways. It is used in temperate continental climatic conditions. The dye contains pigments and fillers combined with modifying additives. The composition of AK-511 complies with GOST R52575-2006, which regulates its use for painting public roads.

This is a quick-drying mixture characterized by good light resistance and an increased brightness coefficient. The markings are visible in any lighting. Like other acrylic enamels, AK-511 has good adhesive properties, high resistance to wear, exposure to wet and chemical environments.

To increase the reflective result, glass beads can be added to the enamel to return light. Must be applied to a clean, dry surface. Thinner can be added to the enamel.

To further increase the reflectivity of the markings, a paint coating is applied over the markings. This technology has a number of advantages:

• the coating complies with GOST R52575-2006;
• marking is more resistant to external influences;
• quick application method;
• the functional qualities of road markings are improved.

With a layer thickness of 2.5 mm per 1 m2, 3.5-4 kg of paint is consumed.

Composition and properties of the material

The marking enamel contains various pigments and fillers diluted on an acrylic copolymer with the addition of modifying additives. The properties of the material are indicated in the certificate of conformity and other technical documentation. Here are the main ones:

• high brightness coefficient;
• ensuring excellent visibility for drivers in the dark and during daylight hours;
• quick drying - in just 15–30 minutes;
• good grip on the surface;
• high wear resistance and hiding power;
• no damage due to sudden temperature changes.

Important! The markings applied to the road will last a long time - they are resistant to water, dirt, fuels and lubricants and other chemicals and salts.

When glass beads are added, the markings are clearly visible even in bad weather. This helps reduce accidents on the road.

Characteristics of the product

Technical characteristics reflect the main parameters of AK-511 paint, which should be studied before using it:

• the created coating is smooth, even, with a uniform texture, without foreign inclusions;
• viscosity according to the device viscometer VZ-246 at a temperature of +20 degrees – 80–160 s;
• dry residue share – 75%;
• coating adhesion – 1 b;
• the time for complete drying of the enamel at a temperature of +20 degrees is 30 minutes;
• brightness factor – 70%;
• material density – 1.4 g/sq. cm;
• degree of grinding – 70 microns;
• lightfastness of the coating – 8 hours;
• resistance to water - 72 hours, to sodium chloride solution - 72 hours, to gasoline - 20 minutes.

Color solutions

AK-511 paint is white, according to GOST it should not have any extraneous shades, it is matte. AK-511 Sprinter enamel is also produced, to which colored pigments are added. Paint colors – yellow, orange, black, red.

Enamel TechnoNIKOL AK

This is a one-component paint and varnish composition that can be applied to the road using the cold method. Its basis is highly dispersed pigments and fillers.

TechnoNIKOL road marking paint does not require dilution and is sold ready-made. It can be used to apply horizontal markings on asphalt and concrete surfaces. Manufacturers offer several modifications of enamel. Each of them is designed for a specific type of road: federal highways, regional or interregional highways, other roads, sidewalks and parking lots. Depending on the modification and type of base to which it is applied, TechnoNIKOL AK has a consumption of 0.4-0.7 kg/m2.

Road marking paint AK-521 “Avtomagistral”

TU 236-005-23401781-01

“Avtomagistral” AK-521 paint is made on the basis of imported acrylic copolymers and pigment and is intended for marking highways and airfield runways with asphalt and concrete pavement.

The paint is certified and meets the requirements of GOST R 51256-99 and GOST R 52575-2006 . Sanitary and epidemiological conclusion No. 62 РЦ.03.231.П.000324.04.09, dated 04/29/2009. valid until 04/29/2014

The paint “Avtomagistral” AK-521 is quick-drying, does not roll out when applied by motor vehicles, and in its characteristics: wear resistance, adhesion, manufacturability when applied, is not inferior to imported compounds.

Available in two types: white, yellow and gray for demarcation - AK-521lux, as well as AK-521 in other colors, including for painting curbs and applying a tactile surface for the visually impaired.

Main technical characteristics of marking paint

Color………………………………………………………………………………………white, yellow

Conditional viscosity according to VZ-246 (Æ nozzle 4 mm) at 20±20С, sec…………………………. 90-120

Drying time at 20±20С, min…………………………………………………………………. 10-11

Mass fraction of non-volatile substances (dry residue), %, not less……………………………………………………… 75

Brightness coefficient, %, not less than white…………………………………………………………………………………………………………………….. 89 yellow ………………………………………………………………………………………………………………. 40

Adhesion (to glass), points, no more than……………………………………………………………….. 2

Degree of grinding on the “Wedge” device, microns, no more than……………………………………. 50

Density, g/cm3, not less than……………………………………………………………………………….. 1.55

Paint consumption for a layer thickness of 0.4 mm (wet), kg/m2 no more than ……………….. 0.55

Recommended paint consumption, kg/m2 not less than…………………………………………………… 0.5

“Avtomagistral” AK-521 luxury paint is available in ready-to-use form and is applied using airless and air methods, as well as manually. Solvent R-5, R-4 is used as a diluent.

Supplied in metal buckets weighing 30 kg, mounted on a Euro pallet. To ensure the visibility of road markings at night in the light of headlights, it is recommended to sprinkle the paint with microglass beads of a fraction of 100-600 microns at a rate of at least 300 g per 1 m2 of markings.

Enamel Line

A white dye used to mark safety lines on asphalt and concrete surfaces. The brightness coefficient of the enamel is 80% due to the reflective beads included in the composition. Enamel for marking roads and airfields The line is also available in yellow, red or black.

It has a number of features:

• it can be used to paint markings on roads of any purpose;
• the high brightness of the composition makes the markings visible even in fog;
• enamel can be applied using various marking mechanisms, pneumatic aerosol devices, and aerosol cans;
• has strong adhesive properties; a small volume of coloring agent is sufficient for a clear pattern;
• quick-drying composition;
• it can be tinted, which is convenient for applying multi-colored markings on small sections of the road;
• resistant to environmental influences, does not fade;
• enamel has a wide temperature range in which it can be stored before use.

“Line”, unlike other paints, is inexpensive and lasts a long time.

Indecoat-511 paint

Indecoat-511 marking paint consists of pigments, fillers and additives. The markings applied by it can be used at low temperatures down to -40°C, and in very hot conditions at +60°C.

Produced from imported raw materials using innovative technologies. This ensures high wear resistance and whiteness of the paint. This dye can be used to mark concrete and cement.

In the basic version, enamel 511 is white, but you can buy yellow, orange, red and black colors. The consumption for a single layer application is 0.3-0.4 kg per m2. Can be applied with a roller by hand or with special equipment.

The intensity of light reflection of this enamel can be increased by adding reflective suspensions.

Cold plastic

Thanks to innovative technologies, it is possible to use not only asphalt paint, but also cold plastic for road marking. It is more wear-resistant and lasts longer even in the most severe climatic conditions. The shelf life of stripes and signs is 2 years, but plastic is much longer.

Domestic manufacturers use imported raw materials to produce cold plastic, so it is of high quality, but cheaper than foreign analogues. It must be applied in a layer of 2 mm. Plastic consumption will be 3.5-4 kg/m2.

Maxidur

It is a white plastic that hardens on the road surface within half an hour after application. To make the marking better visible in fog and at night, reflective beads are added to the composition before application and diluted to a uniform consistency.

Technoplast

Thick-layer markings of parking lots, stop lines, noise lines, pedestrian crossings, directional arrows, etc. are applied. This is a wear-resistant material that can be supplemented with beads that reflect color and change its color by adding color.

Thermoplastic paints

Markings can be applied not only with enamels and cold plastic, but also with thermoplastic materials. They increase the thickness of the applied layer and extend the service life of the marking. Due to their high price, they are used only in areas where wear rates are high. Thermoplastic can only be applied mechanically. Material consumption per 1 m2 is from 3-5 to 8-10 kg.

Marker

Yellow thermoplastic based on petroleum-polymer resins, plasticizers, synthetic rubber and mineral fillers. “Marker” is a road enamel used to apply horizontal markings on routes with intense and busy traffic.

Megoplast-Premium

Thermoplastic can be used to apply center lines, stop lines and arrows on roads. This is a wear-resistant dye that can be used in places with sudden temperature changes. Thermoplastic is applied to a dry coating only by machine.

Enamel AK-511 road paint

Enamel AK-511 (paint AK-511) GOST R 52575-2006 paint for road markings. This enamel is used to apply warning markings on concrete and asphalt roads and parking lots. Marking paint is used to apply horizontal markings to the roadways.

The use of AK-511 road enamel is possible on asphalt concrete and cement concrete general purpose roads in accordance with GOST 23457 and GOST 13508 standards. AK 511 paint consumption per 1 m2 is from 150 grams per layer.

The AK-511 paint base is a suspension of fillers and pigments in a solution of organic solvents and acrylic copolymer.

enamel AK-511 and its technical characteristics according to GOST R 52575-2006

Name of indicators Requirements GOST R 1. Appearance of the paint coating for markings Uniform, matte, without foreign inclusions. 2. Color of paint coating for marking White, shade is not standardized 3. Brightness coefficient of the dried paint film 70-79 4. Density g/cm³, not less than 1.4-1.6 5. Conditional viscosity of enamel according to a viscometer type VZ-246 ( or VZ-4) with a nozzle diameter of 4 mm at a temperature of (20±0.5)ºС, pp., 40-119 6. Mass fraction of non-volatile substances, % 70-79 7. Degree of grinding, microns, no more than 50-100 8. Drying time of the film at a temperature of (20±2)ºС and a thickness of the “wet” layer of 300±30 microns, to degree 3, no more than, min 30 9. Resistance of the coating to static effects at a temperature of (20±2)ºС, h , no less than: - water 48 hours; — 10% sodium hydroxide solution 48 10. Resistance of the coating to static effects at a temperature of (0±2)ºС, h, not less than: — saturated aqueous solution of NaCl 48; — 3% NaCl solution 48 10. Adhesion, points No more than 3

AK-511 contains prescription solvents weighing no more than 5% by weight. The enamel may also include reflective glass bead fractions ranging in size from 100 to 800 microns and weighing no more than 30% of the total mass of the enamel.

The permissible consumption of glass beads when applying reflective markings is from 200 to 250 grams per square meter. The total consumption of AK 511 paint for road markings will be up to 500 grams including balls

At a temperature of 20 degrees, the drying time of enamel to degree 2 is no more than 30 minutes.

Recommendations for the use of AK-511 enamel

AK-511 enamel must be diluted with a solvent before application. A certificate for AK 511 paint is required. It contains indicators of whiteness, drying time and other standards.

ROAD You can buy road paint complete with a thinner in order to give the solution the required working viscosity specified in the technical documentation. According to GOST R 52575-2006, AK-511 is equipped with a prescription solvent.

After adding the solvent, the mixture must be thoroughly mixed for at least 10 minutes. It is advisable to apply markings on a dry road surface, free of dust and dirt.

The recommended temperature regime for applying acrylic road enamel AK-511 is from plus 5 to plus 30 degrees with a relative air humidity not exceeding 85%. The markings are applied using special road equipment using the air spray method. In some cases, the use of a roller and brush is applicable. Reflective glass beads are distributed over the enamel laid in several layers under pressure within 5 seconds from the moment the enamel is sprayed. In the absence of special equipment, it is permissible to pre-mix reflective glass beads directly into the enamel solution. If these recommendations are followed, the average service life of the coating is one year.

Safety of enamel AK-511

AK-511 enamel is a toxic coating. When working with AK road paint, the use of personal protective equipment and rubber gloves is required. Do not spray enamel near open flame sources.

Storage of enamel AK-511

AK-511 enamel has a guaranteed shelf life in unopened original packaging of at least 6 months from the date of production. If the warranty period has expired, then the enamel must be checked for the relevant standard requirements. If the tests are positive, it can be used for road markings.

Contact our specialists if you have any questions, 59-99-08, 59-99-04.

Send a request from the website to check the price of the AK-511

If you know how many kilograms of paint you need to buy, send the quick order form at the bottom of this page

Paint Path

It is highly wear resistant and durable. It can be used on busy highways and at airfields.

Marking paint Path has the following advantages:

• can be applied manually and with special equipment;
• economical;
• wear-resistant;
• durable;
• withstands large mechanical overloads and is not damaged even by snow removal equipment;
• UV resistant;
• immune to the effects of chemicals used to remove ice;
• affordable price.

In order for the marking to serve for a long time, you need to pay attention to the characteristics of the paint and the capabilities of its use.