How to choose temporary adhesive for fixation: 9 best brands

Temporary adhesive is needed when you need to briefly connect various parts made of paper, fabric, plastic or leather. The adhesive is very popular among needlewomen. It is used to attach templates to fabric, fix appliques, or impart the necessary rigidity to the canvas for embroidery. But the scope of application of temporary glue is not limited to handicrafts. It is ideal wherever it is necessary to provide a short-term connection of different elements.

Aerosol adhesive spray: where is it used and how is it used?

When repairing household or technical products, gluing heterogeneous parts and materials, special glue is often required. high-tech and convenient adhesives in aerosols are gaining increasing popularity : excellent products, the distinguishing features of which are economical consumption by spraying and ensuring high bond strength.

What kind of aerosol glue is this?

Universal aerosol adhesive is a high-quality means for fixing and bonding materials of the same or different textures. Its peculiarity is its release form: the glue is sold in bottles with a sprayer, due to which this product has the following advantages:

  • easy way to use;
  • the ability to glue different materials, even fabric;
  • economical consumption;
  • no need to purchase additional tools for applying the product;
  • high degree of adhesion;
  • no traces of use on paint surfaces and colored fabrics;
  • long shelf life;
  • possibility of adjusting the thickness of the jet;
  • creating a thin, uniform layer;
  • presence of a large number of areas of application.

In terms of the structure of its composition, universal aerosol adhesive is practically no different from its analogues, which are sold in other containers. The only difference is its higher price and ease of use: it does not need to be poured from a bottle or squeezed from a tube.

Here are some tips for you:

  • Experienced decorators recommend, before starting to decorate the walls, to practice and “get your hands on” on a sheet of drywall or paper, and only after that take on the walls;
  • If you are not confident in your abilities, then you should not choose complex multi-color designs - start with something simple;
  • Pay close attention to the placement and alignment of the stencil before starting painting. This is especially true for border stencils, so a plumb line will help you;
  • Acrylic paint is almost a win-win option, it is easy to work with and suitable for almost all types of wall coverings;
  • Prepare the surface - it should be clean, dry and as smooth as possible
  • And most importantly, fixing the stencil with temporary glue and applying the paint correctly will largely determine the quality of the final design, so check out these topics.

Varieties and some features

There are two main groups of these agents based on the method and duration of adhesion:

  1. For temporary fastening of materials such as cardboard, fabric and paper. Mostly such products are used in everyday life. They guarantee instant adhesion and do not leave any traces of use on the work surface after separation.
  2. To get long-term results. This adhesive is best suited for gluing film, foil, plastic and labels. It is characterized by quick adhesion and drying, giving a long-lasting effect.

Spray adhesive is reusable. The contents of one can is enough for several times, and the product can be stored for some time after each use.

Application area

Spray adhesive has many applications, and is most often needed for adhesion:

  • paper and fabrics - suitable for everyday situations and handicrafts, since the fastened parts can be connected several times to each other, and the setting time takes a few seconds;
  • films and foil - does not leave marks on these materials, is required for gluing labels on goods and is used in the production of packaging;
  • wood – relevant for furniture production and repair;
  • metal and plastic products - necessary in the field of auto repair and maintenance: capable of reliably holding carpets and other coverings in the car;
  • leather and rubber - due to the fact that the aerosol adhesive composition is sprayed in the thinnest layer and does not spoil the structure of these materials, it is in demand in the production of shoes and clothing for fastening seams;
  • polystyrene foam - allows you to mount this lightweight material to heavier ones; The main areas of use are the production of advertising banners and signs.

How to use spray adhesive for fabric?

Aerosol adhesive can produce long-lasting results when used on fabric under several conditions. The materials to be glued must be completely free of contaminants, degreased and dried. It is recommended to spray the product in a well-ventilated room. Before use, shake the canister, then apply the spray to the material. It is necessary to adjust the width of the jet depending on the surfaces being glued: for dense and heavy materials, a wide jet is needed, and for less dense fabric, a thin one is enough. The distance from the can to the working surface must be at least 20 cm. If it is necessary to apply more than one layer, intervals of 10-15 minutes must be observed between their applications. The glue will dry completely in 30 minutes. In order to evenly apply the composition to the fabric, the container must be held parallel to the surface.

Features of gluing foam products?

Before use, make sure that the surfaces to be joined are clean and free of dust and grease. Next, you can use aerosol glue for foam rubber by following this operating algorithm:

  1. Shake the container for 5-10 seconds.
  2. When applying the substance, keep the container at a distance of at least 15 cm from the surface. The spray nozzle must be fully wrung out to prevent droplets from forming.
  3. Apply spray adhesive in one layer to both work surfaces. The latter can be connected 10-30 seconds after application. When high initial strength is required, it is recommended to wait 10 minutes.

Basic methods of joining fabric

In addition to gluing, there are other ways to attach advertising canvases:

  • Firmware. This option for connecting banners is used to fasten several layers of material. Stitching allows the installation of large diameter fastening structures. This method of attaching banners creates the most durable seam between layers of fabric. The method has its drawbacks. When stitching the canvas, the top layers are damaged. In this case, lamination of advertising materials is impossible. Moisture entering the puncture sites during stitching leads to blurred images. Therefore, this type of connection is used for indoor banners. The number of stitches when sewing should not exceed 6 by 2 cm.
  • Welding. It is used when the components of advertising structures are little susceptible to gluing and do not create reliable adhesion (plasticized polyvinyl chloride). Two layers of canvas are cleaned of dirt and overlapped. Its width should not be less than 10 cm. Then the joints are heated with a welding device until the seam adheres. To prevent waves from spreading along the welding boundary, a press is additionally used. When cooling the banner after welding, temperature changes should be avoided.
  • Fastening with eyelets. A hem is made along the edge of the product. Holes are prepared along the perimeter of the banner and special bushings (eyelets) are fixed in them. Corner holes are additionally secured with durable gaskets. A cable is passed through the holes and the banner is secured to a metal frame.
  • Gluing. This type of connection is used when it is necessary to fasten two pieces of banner fabric together. Second option: for temporary fixation of hems of elements or preliminary work. Glue does not provide reliable fixation of banners to a metal profile or frame outdoors.

How to use and store

Before and after use, you should read the instructions on the can for correct use and further storage of the product. And, although aerosol glue is not harmful to health, does not create difficulties in use and unnecessary contamination, when working with it you must adhere to several rules:

  • Always clean surfaces before applying the product to them, and make sure that small debris and dust do not fall on them during work;
  • shake the aerosol container;
  • Spray the product at an average distance of 20 cm from the surface;
  • products to be glued can only be used after the glue has completely dried;
  • to enhance the effect when gluing two materials, it is advisable to use a press or press the products tightly against each other;
  • When spraying, keep the container parallel to the surface: since its contents will be sprayed faster and more evenly over the surface.

Since the container with glue residue after the first use can be stored for a long time, certain storage conditions must be observed. The optimal room temperature should be in the range of +5 – +30˚C. The expiration date and shelf life are indicated on the packaging: it may vary depending on the manufacturer. After it expires, the product loses its adhesive properties. Safety Tips:

  • do not store spey near batteries and heaters, alkalis and acids - contact with them leads to ignition and explosion;
  • do not smoke near open aerosol;
  • when using glue, use personal protective equipment - gloves and a mask;
  • after using the spray, ventilate the room where the work was carried out;
  • Keep the product away from sunlight.

Precautionary measures

Akfix 705 two-component adhesive is safe for human health, but when working you should protect yourself:

  • The room is provided with good ventilation;
  • The technician must wear safety glasses;
  • Do not allow the composition to come into contact with the skin.

If the glue gets on the skin, do not tear it off, as this can lead to the formation of wounds. To do this, it is better to use solvents; small droplets will come off on their own after a while. Do not wear cotton gloves; the glue will heat the material and it will begin to disintegrate.

If the substance enters the respiratory tract, it can cause symptoms of asthma, so you need to protect yourself.


Do not allow the composition to come into contact with the skin.

Review of manufacturers

There are many spray adhesives on the market now, but products from the following companies deserve special attention:

  1. Multi Spray . It produces universal products that are especially suitable for temporary and permanent strong bonding of metal materials, bricks and cement.
  2. Abro . Connects any materials, has an easy-to-use cylinder with the ability to regulate the thickness of the jet. The product is applied in an even thin layer. The Abro company produces various adhesives for adhesion of materials. Each of them has its own scope of use and instructions.
  3. Tuskbond . Most often it is required for fastening different types of fabrics. Best for bonding Alcantara, leather, carpets and velor. Adhesives from this manufacturer are most in demand in professional repair and maintenance of machines.
  4. Scotch Weld . It has many areas of application: it perfectly bonds leather, film, plastic, acrylic surfaces, metal, rubber and wood. The most popular sprays in the line are 75 3M and 77 3M. They are most often used for lightweight materials. The manufacturer guarantees high strength over time and excellent connection performance.
  5. Presto . The products produced by this manufacturer are absolutely universal, and also have a dispenser on a can for easier and faster use.
  6. Done Deal . Its distinctive feature is its universal composition. Most often used to work on car interiors. Also suitable for gluing leather, glass and rubber.
  7. Penosil . Widely used (using a gun) for construction and tiling work; it can be used to install skirting boards, insulation, and ceramic tiles. The adhesive base from this manufacturer is something between polyurethane foam and standard glue, which is especially important when installing thermal insulation.

The choice of adhesive spray depends on its composition, characteristics and cost. Cheap adhesives can also be of high quality, but before using them, you must definitely find out the permissible operating conditions for them, the storage temperature and the types of surfaces for which they are primarily intended. Aerosol adhesive is an easy-to-use product for a variety of jobs that has many applications. In the modern construction market, it, like the thread locker, is popular due to its excellent properties and ease of use.

Visitor reviews(1)

    Categories:
  • Adhesives for temporary fixation
  • Stencil adhesives

glue

Customers who purchased Marabu-Fix it aerosol temporary fixation adhesive, 150 ml buy in Moscow also bought

We recommend watching

  • Glue "PORCELLAN POTC" for decoupage on glass, ceramic and porcelain surfaces
    vendor code49451
    Volume 150 ml

    Transparent. Water based. No pungent odor.

  • Glue "TEXTILE POTC" for decoupage on fabric
    vendor code90982
    Volume 150 ml

    Transparent. Water based. No pungent odor.

  • Rusty Patina, paint for creating patina and antique effect, 150 ml, color 01 brown
    vendor codeCAD-RP01
    Volume 150 ml
    Manufacturer CADENCE

    A completely ready-to-use water-based paint designed to create a patination effect and give the product an antique effect.

  • Rusty Patina, paint for creating patina and antique effect, 150 ml, color 02 green
    vendor codeCAD-RP02
    Volume 150 ml
    Manufacturer CADENCE

    A completely ready-to-use water-based paint designed to create a patination effect and give the product an antique effect.

  • Rusty Patina, paint for creating patina and the effect of antiquity, 150 ml, color 03 green mold
    vendor codeCAD-RP03
    Volume 150 ml
    Manufacturer CADENCE

    A completely ready-to-use water-based paint designed to create a patination effect and give the product an antique effect.

  • Rusty Patina, paint for creating patina and antique effect, 150 ml, color 04 gray
    vendor codeCAD-RP04
    Volume 150 ml
    Manufacturer CADENCE

    A completely ready-to-use water-based paint designed to create a patination effect and give the product an antique effect.

  • Rusty Patina, paint for creating patina and the effect of antiquity, 150 ml, color 05 lapis lazuli
    vendor codeCAD-RP05
    Volume 150 ml
    Manufacturer CADENCE

    A completely ready-to-use water-based paint designed to create a patination effect and give the product an antique effect.

  • Rusty Patina, paint for creating patina and antique effect, 150 ml, color 06 white
    vendor codeCAD-RP06
    Volume 150 ml
    Manufacturer CADENCE

    A completely ready-to-use water-based paint designed to create a patination effect and give the product an antique effect.

  • Rusty Patina, paint for creating patina and the effect of antiquity, 150 ml, color 07 gray-beige
    vendor codeCAD-RP07
    Volume 150 ml
    Manufacturer CADENCE

    A completely ready-to-use water-based paint designed to create a patination effect and give the product an antique effect.

  • Rusty Patina, paint to create patina and the effect of antiquity, 150 ml, color 08 oxide yellow
    vendor codeCAD-RP08
    Volume 150 ml
    Manufacturer CADENCE

    A completely ready-to-use water-based paint designed to create a patination effect and give the product an antique effect.

  • Rusty Patina, paint for creating patina and antique effect, 150 ml, color 09 gray-black
    vendor codeCAD-RP09
    Volume 150 ml
    Manufacturer CADENCE

    A completely ready-to-use water-based paint designed to create a patination effect and give the product an antique effect.

Rating
( 2 ratings, average 5 out of 5 )
Did you like the article? Share with friends:
For any suggestions regarding the site: [email protected]
Для любых предложений по сайту: [email protected]