Rating of the TOP 7 best airbrushes: which one to choose, pros and cons, reviews, price

Individuality and perfection have taken on a new beginning with airbrushing. The ergonomic device, with its accompanying components, turns nail design and artistic modeling into an absolutely unique and special art of painting. The airbrush controls the width and volume of the line, thereby helping to create paintings and small patterns with perfect accuracy and aesthetic appearance.

The surface is uniformly painted and varnish and enamel are effectively applied, which cannot be said about a brush. If at the moment you are in search of the ideal device, then especially for you we present a rating of the TOP 7 best airbrushes: which one to choose, pros and cons, reviews, price, and, of course, a detailed analysis of each of the presented models.

Classification

Based on the principle of mixing paint and air flow, airbrushes are divided into 2 groups:

• Internal mixing. In this type of device, mixing of air and paint occurs inside the airbrush body. The presented design is the most complex, and accordingly the cost will be more expensive. Such devices are designed to perform complex and delicate artistic work.
• External mixing. A simple design of the device, when used, flows of paint and air are mixed in the paint container itself. This type of airbrush is used for painting large objects, such as cars.

Also, the presented airbrushes are divided according to control principles.

• Single. They are a single action device. During its use, the owner is given the opportunity to regulate only one of the available flows: either paint or air.
• Double action. This airbrush provides control of two flows at once, both air and paint. But, it is important to remember that when using the presented device, you first need to open the valve with the air supply, then the coloring liquid is sprayed.

Requires a compressor to operate

To use an airbrush, you need a source of air or gas, that is, a compressor.
This is a rather expensive unit. First of all, you need to pay attention to its performance. Compressors may be different, but their operating principle is the same - pumping air into a container and feeding it into the airbrush. It is advisable that the unit be equipped with a pressure switch. Then, when the required pressure in the receiver is reached, the pump will turn off. The compressor must also have a reducer to regulate air pressure, oil and water filters. Which unit is better to choose is up to the buyer to decide.

Any airbrush requires maintenance. Upon completion of work, it should be thoroughly cleaned. First you need to rinse the insides of the device using a special solvent, and then wipe the tank and the entire body. After this, you need to disassemble the airbrush and wash all parts in solvent. The needle is wiped with cotton wool or a napkin. After this, the unit is assembled.

Even the best tool will become unusable if it is not stored correctly. There should be no paint left in the airbrush, otherwise it will dry out and use the device will be problematic. A large amount of solvent inside can also damage the unit.

Recently, more and more people are using airbrushes. It is airbrush that allows you to apply almost any complex image to the car body. This way you can give any car an individual style and make it completely unique.

Rating TOP 7 best airbrushes

We have figured out the types of airbrushes, now our task is to choose the best one. From a huge range of models, we have selected 7 of the highest quality airbrush devices, and this list includes:

• Jas 1116;
• Iwata NEO CN;
• ROYALMAX TC-12K;
• Fengda BD – 130 K;
• Inked Caprice;
• Fubag AGS7/0.2 110107;
• Wester FPS – 20.

Let's take a closer look at the presented assortment.

Jas 1116

This device easily turns into reality all your wildest desires in creating real artistic masterpieces! Internal mixing and a fairly small spray radius improve line accuracy and control line width. This type of airbrush is considered a double one, and air and a paint segment are simultaneously sprayed out of the body. The most effective method of adding individuality and sophistication to manicure design.

Price tag: from 1500 to 2000 rubles.

airbrush Jas 1116

pros

• reproduction of subtle and graceful patterns;
• Ideal for creating mini paintings.

Minuses

• not detected.

My friend does manicures, and I recently gave her this device. She really likes it. The application technology is very simple, without any problems. Ideal patterns, thin and graceful, the result is elegant, and most importantly, aesthetically pleasing. We hope you enjoy it for a long time. Thank you.

Iwata NEO CN

A model that differs from the rest in its high-quality assembly, developed according to its own engineering developments. Each airbrush is tested many times for quality and spray efficiency. The device is also equipped with an ideal conical shape of the needle tip, which is called a nozzle. It produces a fine spray of paint, without leaving any extra drops at the end of the job. Dual independent controls control the opening of air and paint valves, preventing excessive consumption of consumable material.

Cost: from 4200 to 4800 rub.

airbrush Iwata NEO CN

pros

• economical consumption of the ink segment and air;
• paint spraying occurs without unnecessary drops;
• The quality of the airbrush has been verified by multiple material tests.

Minuses

• not detected.

Elegantly produces fine lines and patterns. With this device, manicure has become even easier and much more interesting. Does a great job and the quality is noticeable from the first use. I hope it will last a long time, I recommend it.

ROYALMAX TC-12K

The compact and inexpensive device is sold fully equipped with everything necessary for perfect nail art. It comes with a silent compressor, an air hose, a power adapter, a removable stand, a key for adjusting a 0.3 mm nozzle and a measuring pipette. The manicure is performed in three modes and requires minimal but effective consumption of coloring material. The device is easy to use, and most importantly, does not require quick replacement of components.

Price: from 3800 to 4200 rubles.

airbrush ROYALMAX TC-12K

pros

• the operation of the device is absolutely silent;
• operation of the device is noted for up to 4 years of constant use;
• Ideal for beginners due to its ease of use and thin needle of 0.3 mm.

Minuses

• not found.

I have been using this device for about 2 years. I have never changed the equipment, the original parts work smoothly, without a single hint of breakdown. The work is quiet and does not distract household members from any activities. And the drawings and patterns turn out incredibly clear, without smudging, drops or other errors. Thanks to the manufacturer!

Fengda BD – 130 K

This airbrush is intended for performing various types of artistic painting, that is, modeling. Provides excellent results when painting plastic, paper and metal and is intended specifically for professionals in their field. The device is equipped with different needles and nozzles with diameters of 0.2, 0.3, 0.5 mm. With such a wide selection of components, you can control the color transition, line thickness and the process of creating an idea. There is a limitation of paint in the device, so the presented model is ideal for large areas of painting and micro.

Price: from 2000 to 2440 rubles.

airbrush Fengda BD – 130 K

pros

• 3 types of nozzles and needles to choose from;
• the device is equipped with a paint limiter, and allows you to use the color segment in the required quantity;
• Suitable for large and small painting areas.

Minuses

• not detected.

I am a fashion designer by profession, and in my work I often resort to using this airbrush. Decoration of things is done clearly, at a professional level. Thin lines, perfect patterns, and the inscriptions are very voluminous due to the use of different types of needles.

Inked Caprice

A stunning model with high wear resistance of components. The main advantage is the large conical nozzle, which breaks extremely rarely, under any mysterious circumstances. Its diameter of 0.5 mm has a pleasant throughput, and is incredibly important when priming and painting large areas, as it prevents premature hardening of the surface. The airbrush is assembled by hand and undergoes a thorough pre-sale check for quality of work.

Price: from 1900 to 2250 rubles.

airbrush Inked Caprice

pros

• the nozzle prevents the surface to be painted from quickly hardening;
• manual airbrush assembly;
• pre-sale testing of the device;
• Suitable for small and large areas.

Minuses

• not detected.

An excellent, versatile device. I often use it to paint cars, and my wife does her nails with it. It fits perfectly on any surface, reproduces fine and clear lines and creates a chic shine after the work has been done.

Fubag AGS7/0.2 110107

Ergonomic airbrush with a metal, impact-resistant body. An ideal device for working with fine lines that literally require jewelry craftsmanship. A nozzle with a diameter of 0.2 mm was developed especially for this unique work. Uniform and very economical paint spraying is guaranteed due to an economical air flow of 9 l/min and a maximum pressure of 1 bar. The shape of the device completely adapts to your hand and does not hinder your actions in such delicate artistic work.

Cost: from 2000 to 2440 rubles.

airbrush Fubag AGS7/0.2 110107

pros

• metal coating;
• ergonomic design (fully adapts to your hand);
• perfect lines are ensured by a nozzle diameter of 2 mm.

Minuses

• There may be drops after the work done.

I do not regret purchasing this particular airbrush. The paintings turn out incredibly subtle and elegant. The device operates almost silently and does not distract from the main work process. Ideally transforms any things and makes any dream come true.

Wester FPS – 20

An excellent device used not only in nail art and modeling, but also in car tuning. The airbrush has proven itself on the positive side, showing accuracy in drawing and retouching. The device includes a nozzle with a diameter of 0.35 mm and 2 glass containers that speed up the treatment of the area. The kit is also equipped with a long and comfortable hose, which allows you to reach hard-to-reach places on any surface to be painted.

Cost: from 1700 to 2445 rubles.

airbrush Wester FPS – 20

pros

• tank capacity (60 ml);
• ideal for making fine lines;
• does all the necessary work accurately the first time.

Minuses

• not detected.

I use this airbrush all the time to transform my car and snowboard. I make various drawings and inscriptions, passersby like it and I am delighted. After all, you can make any dream come true. The lines are thin, without streaks or unnecessary drops.

Set of equipment for airbrushing

When performing the necessary work, artists do not always have an energy source, an alternating current network. Therefore, the airbrush is considered as a separate set of equipment that can operate from cylinders. You can connect to it both small, low-pressure, and massive containers with compressed gas.

The proposed ready-made solutions - an airbrush with a compressor - are more convenient for beginners. They maintain the necessary balance between the maximum supply of the supercharger and the capabilities of the atomizer, as well as other system parameters. However, the list of functions of such kits is quite modest. Professional designers prefer to assemble their own set of components and equipment.

Pistol grip airbrush

This is the main executive body of the system. The airbrush is selected according to many criteria, which are partially described above. The size of the block, its weight, the location of regulators, paint containers, hose supply and other design characteristics play a big role.

Pressure regulator

This element performs several functions at once:

• limits the maximum pressure for the airbrush;
• allows for quick adjustments;
• is responsible for the overall maximum productivity, the volume of the paint mixture formed per unit of time.

Important! A metal pressure regulator is indispensable when working with gas cylinders as a source of air for an airbrush.

Moisture trap

This unit retains unnecessary moisture coming from the compressor. This ensures the stability of the parameters of the paint mixture and guarantees optimal characteristics of adhesion and fluidity of the applied layer. A moisture trap is a guarantee that there will be no unnecessary splashes or blots on the surface.

Gearbox

A unit that ensures the comfort of the performer’s work and the convenience of adjusting the parameters of the incoming air. It performs several functions:

• regulates and measures pressure, for which it is equipped with a pressure gauge;
• carries out fine removal of moisture;
• stabilizes the flow, neutralizes pressure surges generated by compressors.

The device is small in size and weight, installed directly between the hose and the handle of the airbrush, always within the operator’s reach.

Supply hose

The main thing that an artist should have at his disposal is freedom of action and maneuverability. Therefore, the choice of supply hose for an airbrush is of great importance. They must be durable, made of rubber with nylon braid or special plastic.

Advice! Today, most of the options offered on the market are coiled hoses. However, practice shows that during operation they tend to twist. Therefore, the best choice is a simple linear hose with a length that is convenient for the project at hand.

The last device in the airbrush equipment kit can be an oil filter. It will only be needed by those designers who use screw or other types of compressors that allow oil droplets to enter the air outlet path. The filter guarantees their removal and no influence on the characteristics of the paint mixture.

Comparison table of the presented models

In order to compare the presented products, we suggest taking a look at the table with their characteristics.

Best lists

In addition to the models presented above, we have created another TOP airbrushes that differ from each other in their special characteristics. This rating includes:

• For beginners.
• Price-quality ratio.
• Multifunctional.

Let's take a closer look at the range of models presented.

Jas 1113 – for beginners

The best device for getting the desired result in the shortest possible time. The mixing type is internal, so you get a perfect job right after the first application. The coating application is quite soft, and the device itself has a very ergonomic design that does not interfere with the production of art. The nozzle is 3mm. Ideal for the initial stages of work.

Price tag: from 1312 to 1700 rubles.

airbrush Jas 1113

1178 JAS – price-quality ratio

The device is equipped with an aluminum coating. The Air Control unit ideally helps to adjust the air supply in the airbrush itself and the width of the drawing line. With this technology, you can completely control the process and the subtlety of the work. The set includes 3 replaceable paint containers (2, 5 and 13 ml), and the nozzle diameter is 0.3 mm. Ideal value for money.

Cost: from 1213 to 1500 rubles.

airbrush 1178 JAS

Jas 1122 – multifunctional

A pistol-type airbrush with a very wide range of works. Mounting on the side allows you to paint at any angle of inclination of the device itself and install the container on both the left and right. The kit is equipped with two paint containers (7 ml and 10 ml). The device also has a maximum paint supply limiter. Nozzle size – about.3 mm.

Price: from 2250 to 3000 rubles.

airbrush Jas 1122

Reviews from experienced airbrush artists

I prefer GSI Creos airbrushes. They are very convenient, so it is not difficult for me to use them for almost any complexity of drawings. The price cannot be called low, but you always have to pay for quality.

Alexey Kuzmenkov, 28 years old, Moscow.

Harder&Steenbeck airbrushes are true classics. My Ultra airbrush is many years old and I still use this exact model. It is relatively inexpensive. In general, I prefer Harder&Steenbeck products. She captivates me with the high quality of the resulting drawings and cost-effectiveness.

It is not always possible to have a large compressor and large painting equipment. Sometimes you have to choose from less. I think my situation is not that typical.

Main goals. Local painting of car body elements - maximum coverage area is approximately 20*20 cm (for example, touch up the bottom of the bumper in the area of ​​several damages). It is also possible to use it for painting some household products (small, 30 cm maximum in size). There is NO task to paint entire body parts. Airbrushing (namely the drawing) is most likely also not important, but chips and scratches need to be painted (this is related to the issue of the minimum coverage area).

What to look for when choosing

When purchasing a high-quality airbrush, you need to follow some rules in order for the device to please you not only in the present, but also in the future.

• Nozzle diameter . For thin lines in a small area, select a nozzle diameter from 0.2 to 0.4 mm. More voluminous patterns in a large space therefore require a nozzle with a larger diameter of up to 0.40 mm.
• Paint supply system . For regular designs, a device with a mounting tank on top is intended; for fine work and graceful lines, it is better to purchase airbrushes with a tank on the side. The work is much easier to do, since the device rotates in different directions.

How to choose

To choose the right airbrush, consider the following parameters:

1. An airbrush powered by a compressor requires an external power source. Equipment powered by cylinders can be equipped with units for regulating pressure and air supply.
2. The air hose must be rubber, plastic braided, and of sufficient length.
3. Chinese airbrushes are often equipped with a pressure reducer. This will limit the maximum pressure on the device and ensure dynamic air flow.
4. Quality of seals. We choose plastic seals for working with acrylic paints (Japanese production).

When choosing a model, the following are taken into account:

• presence of a handle;
• size, weight of the device;
• container volume for dyes (at least 2 pieces from 2 ml);
• number of nozzles;
• the presence of a Teflon seal for the needle;
• number of regulators.

Iwata

Japanese Iwata airbrushes are made of stainless carbon steel, chrome-plated brass, resistant to corrosion, with a Teflon seal. Manual assembly, varieties, and checking the sprayer settings allow you to use the tool to create precise drawings in a wide variety of areas: body art, body airbrushing, textile painting, porcelain painting.

Fengda

Fengda airbrushes (manufactured in China) are chosen by experts in their field, and they are also preferred by those who have only recently begun to master the art of airbrushing. The devices are characterized by ease of use in service stations for body repairs, when painting facades, large areas, and minimal adjustment function.

The model range includes all design types. Not recommended for creating small drawings. The needle seal needs frequent repairs.

Jonnesway

The Jonnesway airbrush (Taiwan) is made of chrome-plated steel; the needles are made of titanium. The company has its own steel foundries and specializes in the production of repair kits and keys for cars of almost all models. The production of airbrushes is a related industry, so the choice of Jonnesway models that are in high demand is limited.