Epoxy adhesive Moment: types, characteristics, application

Recently, the Moment line of adhesives familiar to all of us, which was previously produced on the basis of BF-88 or BF-2, has been replenished with a model based on epoxy resins. Which was a logical addition to this universal family.

In fact, it is very convenient: in a specialized store, go to a stand with products of this brand and choose what you need at the moment, or purchase the entire family of adhesives at once, for different occasions and for different materials.

Get to know all the representatives of this line so that you have an idea of the variety of release forms, and so that you can plan a trip to the shopping center and purchase the glue you need in advance.

Moment Super-epoxy transparent

Reliably fastens any materials and their combinations. Does not shrink or expand once cured and can be painted, polished, sanded, drilled or milled. Oil- and water-resistant, resistant to solvents. The adhesive joint holds equally well when used both indoors and outdoors.

Gelatinization occurs 5 minutes after mixing component A with component B, so you need to act quickly, and for this you need to prepare the work front in advance. The initial hardening occurs within an hour, after which light use of the glued parts is possible. Complete polymerization, with formed polymer bonds, occurs a day after joining the parts with an adhesive seam.

It goes on sale in the form of a blister pack, the volume of components is 2 and 6 ml.

Main advantages of the composition

“Moment Epoxylin” glue or “Super Moment” has a number of advantages compared to other adhesives:

Convenience. You can easily measure the required amount of adhesive mass; the remainder will not require special storage conditions, as happens with adhesive solutions after opening the tube.
Strength. As already mentioned, the strength of the connecting seam can be compared to welding.
Versatility. Cold welding allows you to join not only metal, but also many other materials.
Stability. After hardening, the seam surface retains its dimensions during the use of the item; it does not shrink or expand. The only minor drawback is the low elasticity of the connection.
Resistance to chemical and physical influence. The hardened adhesive mass can be sanded, treated with solvents or painted - without damaging the structure of the joint.

Super epoxy metal

Moment Super-epoxy metal is designed specifically for bonding metals and their alloys. After final polymerization, it is not subject to compression or expansion. Oil- and water-resistant, does not react to accidental ingress of solvents into the environment.

It can reliably bond glass, porcelain, wood and other materials or combinations thereof, but its formula is mainly adapted to metals.

Application area:

Metal heating pipes and metal water pipes.
Quick connection and repair of metal machine parts if they do not experience extreme loads.
Repair of crankcases and engine housings.
It is not recommended for gluing containers in which food is stored or from which food is taken.
Not suitable for joining polypropylene, polyethylene and Teflon.

Useful to know > What is jewelry epoxy resin and how to work with it
Blister packaging, in sealed tubes of 2 and 6 ml. Stored at a temperature range from 0°C to 26°C degrees; in case of freezing, keep for several minutes in warm water, up to 40°C degrees. Shelf life 36 months.

Range

It is worth taking a closer look at the Moment product line, which includes 10 adhesives for different purposes, although almost all of them are considered universal.

Moment Super Epoxy Transparent

Moment Super Epoxy is an absolutely transparent composition that is a universal means for gluing any surfaces. It is highly resistant to moisture, oils, and solvents. Suitable for internal and external work. After 60 minutes the product gains sufficient strength. Especially recommended for joining porcelain, earthenware, crystal, glass, fiberglass, and various plastics.

Moment Super Epoxy Metal

Due to the addition of special modifying additives, the adhesive is suitable for joining any metals and alloys; it does not deform or expand after curing. The product is suitable for hard PVC, cork, marble, stone, wood, but it shows the best performance on metals. Indications for use:

connection, repair of metal parts;
repairing cracks and leaks in pipes and tanks.

Moment Super Epoxy Formula 1

The product is available in a syringe with a unique attachment in the form of a mixer. This helps to accurately dose and quickly mix components directly inside the syringe. This glue is better applied to the surface and is more comfortable to work with. The product is universal, suitable for most materials (except Teflon, polypropylene, polyethylene, rubber).

Moment Super Epoxy Transparent in a syringe

The glue is similar to the Moment Super Epoxy transparent product, only it comes in a syringe with a dispenser. It is considered a universal composition and has no specific application.

Moment Super Epoxy Formula 5

The product is produced in a syringe with a mixer, which allows you to mix the components without the use of utensils, without contact with the skin, quickly and reliably. No additional tools are required either. The glue dries in 5 minutes, after 8 hours it can be drilled, polished, sanded. This composition is ideal for filling various cracks, chips, dents, and is suitable for restoration of all types of building materials.

Moment Epoxylin 2 in 1

Moment Epoxylin 48 g is the second line of products in the Moment line based on epoxy resin. They are a putty in the shape of a cylinder, where under the first component there is a second (hardener). Both substances should be kneaded with your hands, mixed, after which they will react. Epoxylin 2 in 1 is suitable for filling in corners, missing elements, and sealing defects.

The glue does not expand and is resistant to moisture and oils. It hardens in 10 minutes, gains high strength in 70 minutes, and after 2 hours it has a strength of about 50% of the final one. Universal, suitable for all types of materials, except Teflon, polyethylene, rubber.

Moment Epoxylin Mini

The product is similar to that described above, but is available in a small convenient package (6 g). It is used for restoration and repair of any products, except those in contact with food.

Moment Super Epoxylin

An analogue of Super Epoxylin 2 in 1, but produced in a package of 5*48 g. Intended for a large volume of work.

Moment Epoxiline Metal

An adhesive composition in the form of putty that provides the highest strength when working with metal surfaces and alloys. Ideal for gluing:

gland;
become;
copper;
brass;
lead;
stainless steel;
aluminum;
tin.

Moment Epoxylin Duo

Epoxylin Duo differs only in its larger packaging - it includes 2 cylinders of 50 g of high-quality, reliable glue. It can be used for all types of materials; the composition is considered universal.

Super-epoxy Formula 1

Original packaging in a monotube, divided inside into sealed cavities containing the resin compound and hardener. Mixing of the components occurs at the moment the glue is supplied through two tubes isolated from each other at the very exit to the outside. Thanks to the complex shape of the nozzles, the mixing is vortex and very reliable, without inhomogeneities, which ensures uniform hardening of the mixture. Used for external and internal work.

Gelatinization occurs within 2-3 minutes, and initial hardening, after which you can confidently use the glued product, occurs after 8 hours, at a temperature range of 20-25°C degrees.

Formula 1 finds various applications not related to repairing food utensils or gluing Teflon, polypropylene or polyethylene.

The release form is a blister in which a 14 ml syringe tube is sealed. Store the glue in a tightly screwed tube at a temperature of 10°C to 30°C degrees. Shelf life is one and a half years.

Composition of the product

The series adhesives are presented in two packages. One bottle contains the following components: epoxy resin, modifiers, fillers. The second bottle contains a hardener for epoxy (based on polymercaptan) and modifiers. Usually a 6 ml portion is consumed at a time, but it can be divided if necessary.

Why do you need a two-pack release form? Epoxy resin cures only after the start of the chemical polymerization reaction, which is ensured by the introduction of a hardener. As the components are joined, a high-strength adhesive joint is created that is difficult to break and almost impossible to break. Some types of adhesives come with trays for mixing components.

Super-epoxy transparent in a syringe

The release form of this glue is also mono-packaging with simultaneous supply of resin compound and hardener. The different diameters of the outlet nozzles of these two components ensure a dosed supply of components, which is important for proper mixing.

Reliable and durable bonding of almost any materials: glass, porcelain, earthenware, metals and their alloys, concrete, natural stone, crystal, fiberglass, cork, polycarbonate, polyamide, fabrics, as well as all their combinations. It does not glue only non-wettable materials such as Teflon or polypropylene, with which adhesion is impossible even after roughening the surfaces.

The optimal application option is to seal cracks, chips, and gaps after other adhesive materials.

Super-Epoxy Formula 5

Super effective on contact with any material except those not recommended for epoxy: rubber, silicone, Teflon, polypropylene. Single-tube syringe with a mixer attachment for simultaneous supply of compound and hardener, packed in a sealed blister.

After polymerization, the adhesive is not subject to shrinkage or expansion, and is also not afraid of moisture, technical oil and active solvents.

Gelatinization occurs already in the 5th minute after the glue is applied to pre-treated surfaces, and after half a day the repaired products can be used.

Useful to know > Which epoxy glue to choose for gluing metal, how to work with it

Gluing dissimilar materials is allowed: porcelain, metals and their alloys, wood, paper, fabrics, etc. Packaging – a combined tube of 14 ml, sealed in a blister.

Moment-Epoxylin 2 in 1

Super strong connection of any materials, from metals to paper. It is a cylinder of putty in which, under the outer layer of a compound with filler, which can be of any color, there is a second isolated layer of hardener. When cutting off part of the cylinder and kneading the plasticine-like putty with wet hands, a thermochemical reaction of initial polymerization begins.

You will have about 5 minutes to apply the composition to the surfaces to be bonded, and after 10 minutes from the start of the reaction, the composition will initially harden, and it will no longer be possible to work with it further. Therefore, you need to be careful when separating the required portion and have time to do everything within 5 minutes.

After 70 minutes, the strength of the adhesive seam becomes sufficient for not very intensive use, or at least to remove a vice or clamp, and after 8 hours the glue reaches 50% of the declared strength.

Packaging: 48 gram cylinder, sealed in a blister card.

Instructions for use

All gluing operations are carried out only with gloves. Glue that gets on your hands is difficult to remove; it hardens instantly and can also cause burns. No special knowledge or skills are required when using the product; the instructions for use are simple:

Clean the surfaces to be bonded. For this purpose, use water, degreasers, paper, sandpaper and other convenient devices. Ultimately, there should be no dirt, dust or grease on the base.
Cut off the tip of the nozzle of the syringe, mix hardener and resin in equal proportions. Usually the kit includes an attached container and a spatula for mixing.
Apply the mixture to both surfaces for 3-5 minutes. After 5 minutes, the epoxy glue will be unusable. Press the parts and fix for 2 minutes.
Leave the product for a day before active use. To improve the quality of the joint, do not move the parts within the specified time, otherwise the seam may turn out uneven. The joint can be sanded and polished after 8 hours.
Excess glue that has come out must be removed immediately. Fresh glue stains can be removed with acetone; dried ones will have to be removed with difficulty mechanically.

Epoxy-Mini 2 in 1

A version of Epoxilin, divided into 6 mini servings, ready to use.

It is the same two-component cylinders as in Epoxylin, only in the form of ready-made portions for gluing. They also need to be kneaded with wet fingers and quickly, before the expiration of 5 minutes, applied to the surfaces to be glued, previously degreased with alcohol or acetone.

Completely hardens in 10 minutes. After 70 minutes it gains sufficient density and hardness for external influence, and after 2 hours it gains 50% of the calculated hardness.

Super-Epoxylin Cold Welding

With this glue you can not only glue disparate parts, but also mold missing fragments of household products: a broken corner of a table, a missing fragment of a chair leg, a chipped piece of the ebonite handle of a kitchen knife or hatchet.

The required portion of epoxylin is cut off with a knife and kneaded with wet hands. After the mashed composition becomes warm due to the thermochemical reaction that has begun, it is applied to the desired location and leveled, giving it the intended shape. After complete hardening, which occurs after 10 hours, residual roughness can be removed by grinding, polishing or other types of mechanical action.

Useful to know > Is it possible to make a hardener for epoxy resin with your own hands at home?

Glues any materials and their combinations, except those that are not amenable to wetting, and therefore adhesion, by adhesive components: polypropylene, Teflon, silicone, rubber, polyethylene. Available in a box with five 48 gram glue cylinders.

What's new?

Epoxy adhesive “Moment Epoxylin” is usually compared with cold welding, but in fact this process of joining surfaces has nothing in common with the welding process. The term is suitable only because the bond strength of the adhesive seam is not inferior to welding. This becomes possible due to the fact that epoxy glue has a two-component composition; its components are mixed immediately before use.

It includes:

epoxy resin with modifying additives;
polyaminoamide based hardener.

The appearance of Epoxylin Moment glue is a bit like a plasticine sausage, from which you need to cut pieces of the required size before use. Depending on the brand, it can be produced:

“Epoxyline” looks like an oblong piece of plasticine, inside of which a hardener is placed, separated from the epoxy resin by a thin film. The weight of such a piece is 48 g.
“Epoxylin mini”. Available in blisters of 6 tablets, each of which weighs 5 g. It has the same release form as the 48 g sticks.
“Epoxylin duo”. In this case, the two components are separate from each other. Before use, it is necessary to cut a piece of the required size from each viscous mass and mix the components. These bars weigh a standard 48 g.

Glue release form may vary

According to reviews from sellers of building materials, the most popular among home craftsmen is “Moment” epoxylin glue, produced in the form of a bar weighing 48 g, in which there is a hardener inside and resin on the outside. Most people find this shape the most convenient for gluing various surfaces.

Moment-Epoxylin Metal

2 in 1 putty, similar in mechanism of action and release form to Super-Epoxylin, but designed specifically for metals. Contains metal shavings and dust, which promotes better adhesion to metal products.

The use of putty-glue is also similar to Super-Epoxylin. This glue can be used to both glue and sculpt surfaces, giving them any shape. After complete hardening, which occurs after 10 hours, the formed product or seam can be drilled, milled, painted, and generally perform actions with it similar to those that are possible with the material being glued.

Designed mainly for gluing and repairing metal products: iron, steel, including stainless steel, brass, copper, aluminum and its alloys, tin or lead. But it also glues porcelain, natural stone, wood, glass and their combinations just as well. Release form: 5 cylinders of 48 grams each in a cardboard package.

Well-known epoxy adhesive brand Moment and its varieties

In fact, it is very convenient: in a specialized store, go to a stand with products of this brand and choose what you need at the moment, or purchase the entire family of adhesives at once, for different occasions and for different materials.

Moment Super-epoxy transparent

Gelatinization occurs 5 minutes after mixing component A with component B, so you need to act quickly, and for this you need to prepare the work front in advance.

The initial hardening occurs within an hour, after which light use of the glued parts is possible.

Complete polymerization, with formed polymer bonds, occurs a day after joining the parts with an adhesive seam.

It goes on sale in the form of a blister pack, the volume of components is 2 and 6 ml.

It can reliably bond glass, porcelain, wood and other materials or combinations thereof, but its formula is mainly adapted to metals.

Application area:

Metal heating pipes and metal water pipes.
Quick connection and repair of metal machine parts if they do not experience extreme loads.
Repair of crankcases and engine housings.
It is not recommended for gluing containers in which food is stored or from which food is taken.
Not suitable for joining polypropylene, polyethylene and Teflon.

Blister packaging, in sealed tubes of 2 and 6 ml. Stored at a temperature range from 0°C to 26°C degrees; in case of freezing, keep for several minutes in warm water, up to 40°C degrees. Shelf life 36 months.

Super-epoxy Formula 1

Original packaging in a monotube, divided inside into sealed cavities containing the resin compound and hardener.

Mixing of the components occurs at the moment the glue is supplied through two tubes isolated from each other at the very exit to the outside.

Thanks to the complex shape of the nozzles, the mixing is vortex and very reliable, without inhomogeneities, which ensures uniform hardening of the mixture. Used for external and internal work.

Gelatinization occurs within 2-3 minutes, and initial hardening, after which you can confidently use the glued product, occurs after 8 hours, at a temperature range of 20-25°C degrees.

Formula 1 finds various applications not related to repairing food utensils or gluing Teflon, polypropylene or polyethylene.

The release form is a blister in which a 14 ml syringe tube is sealed. Store the glue in a tightly screwed tube at a temperature of 10°C to 30°C degrees. Shelf life is one and a half years.

Super-epoxy transparent in a syringe

The optimal application option is to seal cracks, chips, and gaps after other adhesive materials.

Super-Epoxy Formula 5

After polymerization, the adhesive is not subject to shrinkage or expansion, and is also not afraid of moisture, technical oil and active solvents.

Gelatinization occurs already in the 5th minute after the glue is applied to pre-treated surfaces, and after half a day the repaired products can be used.

Gluing dissimilar materials is allowed: porcelain, metals and their alloys, wood, paper, fabrics, etc. Packaging – a combined tube of 14 ml, sealed in a blister.

Moment-Epoxylin 2 in 1

Packaging: 48 gram cylinder, sealed in a blister card.

Epoxy-Mini 2 in 1

A version of Epoxilin, divided into 6 mini servings, ready to use.

Completely hardens in 10 minutes. After 70 minutes it gains sufficient density and hardness for external influence, and after 2 hours it gains 50% of the calculated hardness.

Super-Epoxylin Cold Welding

The required portion of epoxylin is cut off with a knife and kneaded with wet hands.

After the mashed composition becomes warm due to the thermochemical reaction that has begun, it is applied to the desired location and leveled, giving it the intended shape.

After complete hardening, which occurs after 10 hours, residual roughness can be removed by grinding, polishing or other types of mechanical action.

Moment-Epoxylin DUO

Universal adhesive for working with a wide variety of materials in the form of a plasticine-like two-component putty, for express gluing of parts made of wood, porcelain, earthenware, natural stone, glass and plexiglass, metals and their alloys, as well as for combinations of these materials.

Available in the form of cylinders with a neutral gray color, weighing 25 g, 2 pieces in a cardboard package.

When working with Momentm epoxy-based adhesives, follow all recommendations developed for these materials. In particular, try to remove drops of glue that protrude after compressing and fixing the parts to be glued with a swab moistened with acetone or ethanol. If you didn’t notice any drops of glue in time, clean them off with a scraper.

Regarding safety precautions, also follow the general rules for working with epoxy: room ventilation, eye and respiratory protection, rubber or silicone gloves on your hands.

Moment-Epoxylin DUO

Available in the form of cylinders with a neutral gray color, weighing 25 g, 2 pieces in a cardboard package.

Regarding safety precautions, also follow the general rules for working with epoxy: room ventilation, eye and respiratory protection, rubber or silicone gloves on your hands.